swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 8bb7eca972ad531c9b149c0a51ab43a417385813 authored by Linus Torvalds on 31 October 2021, 20:53:10 UTC
Linux 5.15
Linux 5.15
Tip revision: 8bb7eca
sclp_rw.c
// SPDX-License-Identifier: GPL-2.0
/*
* driver: reading from and writing to system console on S/390 via SCLP
*
* Copyright IBM Corp. 1999, 2009
*
* Author(s): Martin Peschke <mpeschke@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#include <linux/kmod.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
#include <linux/uaccess.h>
#include "sclp.h"
#include "sclp_rw.h"
/*
* The room for the SCCB (only for writing) is not equal to a pages size
* (as it is specified as the maximum size in the SCLP documentation)
* because of the additional data structure described above.
*/
#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
/* Event type structure for write message and write priority message */
static struct sclp_register sclp_rw_event = {
.send_mask = EVTYP_MSG_MASK,
};
/*
* Setup a sclp write buffer. Gets a page as input (4K) and returns
* a pointer to a struct sclp_buffer structure that is located at the
* end of the input page. This reduces the buffer space by a few
* bytes but simplifies things.
*/
struct sclp_buffer *
sclp_make_buffer(void *page, unsigned short columns, unsigned short htab)
{
struct sclp_buffer *buffer;
struct sccb_header *sccb;
sccb = (struct sccb_header *) page;
/*
* We keep the struct sclp_buffer structure at the end
* of the sccb page.
*/
buffer = ((struct sclp_buffer *) ((addr_t) sccb + PAGE_SIZE)) - 1;
buffer->sccb = sccb;
buffer->retry_count = 0;
buffer->messages = 0;
buffer->char_sum = 0;
buffer->current_line = NULL;
buffer->current_length = 0;
buffer->columns = columns;
buffer->htab = htab;
/* initialize sccb */
memset(sccb, 0, sizeof(struct sccb_header));
sccb->length = sizeof(struct sccb_header);
return buffer;
}
/*
* Return a pointer to the original page that has been used to create
* the buffer.
*/
void *
sclp_unmake_buffer(struct sclp_buffer *buffer)
{
return buffer->sccb;
}
/*
* Initialize a new message the end of the provided buffer with
* enough room for max_len characters. Return 0 on success.
*/
static int
sclp_initialize_mto(struct sclp_buffer *buffer, int max_len)
{
struct sccb_header *sccb;
struct msg_buf *msg;
struct mdb *mdb;
struct go *go;
struct mto *mto;
int msg_size;
/* max size of new message including message text */
msg_size = sizeof(struct msg_buf) + max_len;
/* check if current buffer sccb can contain the mto */
sccb = buffer->sccb;
if ((MAX_SCCB_ROOM - sccb->length) < msg_size)
return -ENOMEM;
msg = (struct msg_buf *)((addr_t) sccb + sccb->length);
memset(msg, 0, sizeof(struct msg_buf));
msg->header.length = sizeof(struct msg_buf);
msg->header.type = EVTYP_MSG;
mdb = &msg->mdb;
mdb->header.length = sizeof(struct mdb);
mdb->header.type = 1;
mdb->header.tag = 0xD4C4C240; /* ebcdic "MDB " */
mdb->header.revision_code = 1;
go = &mdb->go;
go->length = sizeof(struct go);
go->type = 1;
mto = &mdb->mto;
mto->length = sizeof(struct mto);
mto->type = 4; /* message text object */
mto->line_type_flags = LNTPFLGS_ENDTEXT; /* end text */
/* set pointer to first byte after struct mto. */
buffer->current_msg = msg;
buffer->current_line = (char *) (mto + 1);
buffer->current_length = 0;
return 0;
}
/*
* Finalize message initialized by sclp_initialize_mto(),
* updating the sizes of MTO, enclosing MDB, event buffer and SCCB.
*/
static void
sclp_finalize_mto(struct sclp_buffer *buffer)
{
struct sccb_header *sccb;
struct msg_buf *msg;
/*
* update values of sizes
* (SCCB, Event(Message) Buffer, Message Data Block)
*/
sccb = buffer->sccb;
msg = buffer->current_msg;
msg->header.length += buffer->current_length;
msg->mdb.header.length += buffer->current_length;
msg->mdb.mto.length += buffer->current_length;
sccb->length += msg->header.length;
/*
* count number of buffered messages (= number of Message Text
* Objects) and number of buffered characters
* for the SCCB currently used for buffering and at all
*/
buffer->messages++;
buffer->char_sum += buffer->current_length;
buffer->current_line = NULL;
buffer->current_length = 0;
buffer->current_msg = NULL;
}
/*
* processing of a message including escape characters,
* returns number of characters written to the output sccb
* ("processed" means that is not guaranteed that the character have already
* been sent to the SCLP but that it will be done at least next time the SCLP
* is not busy)
*/
int
sclp_write(struct sclp_buffer *buffer, const unsigned char *msg, int count)
{
int spaces, i_msg;
int rc;
/*
* parse msg for escape sequences (\t,\v ...) and put formated
* msg into an mto (created by sclp_initialize_mto).
*
* We have to do this work ourselfs because there is no support for
* these characters on the native machine and only partial support
* under VM (Why does VM interpret \n but the native machine doesn't ?)
*
* Depending on i/o-control setting the message is always written
* immediately or we wait for a final new line maybe coming with the
* next message. Besides we avoid a buffer overrun by writing its
* content.
*
* RESTRICTIONS:
*
* \r and \b work within one line because we are not able to modify
* previous output that have already been accepted by the SCLP.
*
* \t combined with following \r is not correctly represented because
* \t is expanded to some spaces but \r does not know about a
* previous \t and decreases the current position by one column.
* This is in order to a slim and quick implementation.
*/
for (i_msg = 0; i_msg < count; i_msg++) {
switch (msg[i_msg]) {
case '\n': /* new line, line feed (ASCII) */
/* check if new mto needs to be created */
if (buffer->current_line == NULL) {
rc = sclp_initialize_mto(buffer, 0);
if (rc)
return i_msg;
}
sclp_finalize_mto(buffer);
break;
case '\a': /* bell, one for several times */
/* set SCLP sound alarm bit in General Object */
if (buffer->current_line == NULL) {
rc = sclp_initialize_mto(buffer,
buffer->columns);
if (rc)
return i_msg;
}
buffer->current_msg->mdb.go.general_msg_flags |=
GNRLMSGFLGS_SNDALRM;
break;
case '\t': /* horizontal tabulator */
/* check if new mto needs to be created */
if (buffer->current_line == NULL) {
rc = sclp_initialize_mto(buffer,
buffer->columns);
if (rc)
return i_msg;
}
/* "go to (next htab-boundary + 1, same line)" */
do {
if (buffer->current_length >= buffer->columns)
break;
/* ok, add a blank */
*buffer->current_line++ = 0x40;
buffer->current_length++;
} while (buffer->current_length % buffer->htab);
break;
case '\f': /* form feed */
case '\v': /* vertical tabulator */
/* "go to (actual column, actual line + 1)" */
/* = new line, leading spaces */
if (buffer->current_line != NULL) {
spaces = buffer->current_length;
sclp_finalize_mto(buffer);
rc = sclp_initialize_mto(buffer,
buffer->columns);
if (rc)
return i_msg;
memset(buffer->current_line, 0x40, spaces);
buffer->current_line += spaces;
buffer->current_length = spaces;
} else {
/* one an empty line this is the same as \n */
rc = sclp_initialize_mto(buffer,
buffer->columns);
if (rc)
return i_msg;
sclp_finalize_mto(buffer);
}
break;
case '\b': /* backspace */
/* "go to (actual column - 1, actual line)" */
/* decrement counter indicating position, */
/* do not remove last character */
if (buffer->current_line != NULL &&
buffer->current_length > 0) {
buffer->current_length--;
buffer->current_line--;
}
break;
case 0x00: /* end of string */
/* transfer current line to SCCB */
if (buffer->current_line != NULL)
sclp_finalize_mto(buffer);
/* skip the rest of the message including the 0 byte */
i_msg = count - 1;
break;
default: /* no escape character */
/* do not output unprintable characters */
if (!isprint(msg[i_msg]))
break;
/* check if new mto needs to be created */
if (buffer->current_line == NULL) {
rc = sclp_initialize_mto(buffer,
buffer->columns);
if (rc)
return i_msg;
}
*buffer->current_line++ = sclp_ascebc(msg[i_msg]);
buffer->current_length++;
break;
}
/* check if current mto is full */
if (buffer->current_line != NULL &&
buffer->current_length >= buffer->columns)
sclp_finalize_mto(buffer);
}
/* return number of processed characters */
return i_msg;
}
/*
* Return the number of free bytes in the sccb
*/
int
sclp_buffer_space(struct sclp_buffer *buffer)
{
struct sccb_header *sccb;
int count;
sccb = buffer->sccb;
count = MAX_SCCB_ROOM - sccb->length;
if (buffer->current_line != NULL)
count -= sizeof(struct msg_buf) + buffer->current_length;
return count;
}
/*
* Return number of characters in buffer
*/
unsigned int
sclp_chars_in_buffer(struct sclp_buffer *buffer)
{
unsigned int count;
count = buffer->char_sum;
if (buffer->current_line != NULL)
count += buffer->current_length;
return count;
}
/*
* called by sclp_console_init and/or sclp_tty_init
*/
int
sclp_rw_init(void)
{
static int init_done = 0;
int rc;
if (init_done)
return 0;
rc = sclp_register(&sclp_rw_event);
if (rc == 0)
init_done = 1;
return rc;
}
#define SCLP_BUFFER_MAX_RETRY 1
/*
* second half of Write Event Data-function that has to be done after
* interruption indicating completion of Service Call.
*/
static void
sclp_writedata_callback(struct sclp_req *request, void *data)
{
int rc;
struct sclp_buffer *buffer;
struct sccb_header *sccb;
buffer = (struct sclp_buffer *) data;
sccb = buffer->sccb;
if (request->status == SCLP_REQ_FAILED) {
if (buffer->callback != NULL)
buffer->callback(buffer, -EIO);
return;
}
/* check SCLP response code and choose suitable action */
switch (sccb->response_code) {
case 0x0020 :
/* Normal completion, buffer processed, message(s) sent */
rc = 0;
break;
case 0x0340: /* Contained SCLP equipment check */
if (++buffer->retry_count > SCLP_BUFFER_MAX_RETRY) {
rc = -EIO;
break;
}
/* remove processed buffers and requeue rest */
if (sclp_remove_processed((struct sccb_header *) sccb) > 0) {
/* not all buffers were processed */
sccb->response_code = 0x0000;
buffer->request.status = SCLP_REQ_FILLED;
rc = sclp_add_request(request);
if (rc == 0)
return;
} else
rc = 0;
break;
case 0x0040: /* SCLP equipment check */
case 0x05f0: /* Target resource in improper state */
if (++buffer->retry_count > SCLP_BUFFER_MAX_RETRY) {
rc = -EIO;
break;
}
/* retry request */
sccb->response_code = 0x0000;
buffer->request.status = SCLP_REQ_FILLED;
rc = sclp_add_request(request);
if (rc == 0)
return;
break;
default:
if (sccb->response_code == 0x71f0)
rc = -ENOMEM;
else
rc = -EINVAL;
break;
}
if (buffer->callback != NULL)
buffer->callback(buffer, rc);
}
/*
* Setup the request structure in the struct sclp_buffer to do SCLP Write
* Event Data and pass the request to the core SCLP loop. Return zero on
* success, non-zero otherwise.
*/
int
sclp_emit_buffer(struct sclp_buffer *buffer,
void (*callback)(struct sclp_buffer *, int))
{
/* add current line if there is one */
if (buffer->current_line != NULL)
sclp_finalize_mto(buffer);
/* Are there messages in the output buffer ? */
if (buffer->messages == 0)
return -EIO;
buffer->request.command = SCLP_CMDW_WRITE_EVENT_DATA;
buffer->request.status = SCLP_REQ_FILLED;
buffer->request.callback = sclp_writedata_callback;
buffer->request.callback_data = buffer;
buffer->request.sccb = buffer->sccb;
buffer->callback = callback;
return sclp_add_request(&buffer->request);
}