swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 9fe6206f400646a2322096b56c59891d530e8d51 authored by Linus Torvalds on 01 August 2010, 22:11:14 UTC
Linux 2.6.35
Linux 2.6.35
Tip revision: 9fe6206
suspend.c
/*
* kernel/power/suspend.c - Suspend to RAM and standby functionality.
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
* Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file is released under the GPLv2.
*/
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/syscalls.h>
#include <linux/gfp.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include "power.h"
const char *const pm_states[PM_SUSPEND_MAX] = {
[PM_SUSPEND_STANDBY] = "standby",
[PM_SUSPEND_MEM] = "mem",
};
static struct platform_suspend_ops *suspend_ops;
/**
* suspend_set_ops - Set the global suspend method table.
* @ops: Pointer to ops structure.
*/
void suspend_set_ops(struct platform_suspend_ops *ops)
{
mutex_lock(&pm_mutex);
suspend_ops = ops;
mutex_unlock(&pm_mutex);
}
bool valid_state(suspend_state_t state)
{
/*
* All states need lowlevel support and need to be valid to the lowlevel
* implementation, no valid callback implies that none are valid.
*/
return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
}
/**
* suspend_valid_only_mem - generic memory-only valid callback
*
* Platform drivers that implement mem suspend only and only need
* to check for that in their .valid callback can use this instead
* of rolling their own .valid callback.
*/
int suspend_valid_only_mem(suspend_state_t state)
{
return state == PM_SUSPEND_MEM;
}
static int suspend_test(int level)
{
#ifdef CONFIG_PM_DEBUG
if (pm_test_level == level) {
printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
mdelay(5000);
return 1;
}
#endif /* !CONFIG_PM_DEBUG */
return 0;
}
/**
* suspend_prepare - Do prep work before entering low-power state.
*
* This is common code that is called for each state that we're entering.
* Run suspend notifiers, allocate a console and stop all processes.
*/
static int suspend_prepare(void)
{
int error;
if (!suspend_ops || !suspend_ops->enter)
return -EPERM;
pm_prepare_console();
error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
if (error)
goto Finish;
error = usermodehelper_disable();
if (error)
goto Finish;
error = suspend_freeze_processes();
if (!error)
return 0;
suspend_thaw_processes();
usermodehelper_enable();
Finish:
pm_notifier_call_chain(PM_POST_SUSPEND);
pm_restore_console();
return error;
}
/* default implementation */
void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
{
local_irq_disable();
}
/* default implementation */
void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
{
local_irq_enable();
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
return error;
}
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
}
if (suspend_ops->prepare_late) {
error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = sysdev_suspend(PMSG_SUSPEND);
if (!error) {
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
sysdev_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
if (suspend_ops->wake)
suspend_ops->wake();
Power_up_devices:
dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
suspend_ops->finish();
return error;
}
/**
* suspend_devices_and_enter - suspend devices and enter the desired system
* sleep state.
* @state: state to enter
*/
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
gfp_t saved_mask;
if (!suspend_ops)
return -ENOSYS;
if (suspend_ops->begin) {
error = suspend_ops->begin(state);
if (error)
goto Close;
}
suspend_console();
saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
goto Recover_platform;
}
suspend_test_finish("suspend devices");
if (suspend_test(TEST_DEVICES))
goto Recover_platform;
suspend_enter(state);
Resume_devices:
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
set_gfp_allowed_mask(saved_mask);
resume_console();
Close:
if (suspend_ops->end)
suspend_ops->end();
return error;
Recover_platform:
if (suspend_ops->recover)
suspend_ops->recover();
goto Resume_devices;
}
/**
* suspend_finish - Do final work before exiting suspend sequence.
*
* Call platform code to clean up, restart processes, and free the
* console that we've allocated. This is not called for suspend-to-disk.
*/
static void suspend_finish(void)
{
suspend_thaw_processes();
usermodehelper_enable();
pm_notifier_call_chain(PM_POST_SUSPEND);
pm_restore_console();
}
/**
* enter_state - Do common work of entering low-power state.
* @state: pm_state structure for state we're entering.
*
* Make sure we're the only ones trying to enter a sleep state. Fail
* if someone has beat us to it, since we don't want anything weird to
* happen when we wake up.
* Then, do the setup for suspend, enter the state, and cleaup (after
* we've woken up).
*/
int enter_state(suspend_state_t state)
{
int error;
if (!valid_state(state))
return -ENODEV;
if (!mutex_trylock(&pm_mutex))
return -EBUSY;
printk(KERN_INFO "PM: Syncing filesystems ... ");
sys_sync();
printk("done.\n");
pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
error = suspend_prepare();
if (error)
goto Unlock;
if (suspend_test(TEST_FREEZER))
goto Finish;
pr_debug("PM: Entering %s sleep\n", pm_states[state]);
error = suspend_devices_and_enter(state);
Finish:
pr_debug("PM: Finishing wakeup.\n");
suspend_finish();
Unlock:
mutex_unlock(&pm_mutex);
return error;
}
/**
* pm_suspend - Externally visible function for suspending system.
* @state: Enumerated value of state to enter.
*
* Determine whether or not value is within range, get state
* structure, and enter (above).
*/
int pm_suspend(suspend_state_t state)
{
if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
return enter_state(state);
return -EINVAL;
}
EXPORT_SYMBOL(pm_suspend);