swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: f0c4d9fc9cc9462659728d168387191387e903cc authored by Linus Torvalds on 06 November 2022, 23:07:11 UTC
Linux 6.1-rc4
Linux 6.1-rc4
Tip revision: f0c4d9f
pktgen_sample04_many_flows.sh
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Script example for many flows testing
#
# Number of simultaneous flows limited by variable $FLOWS
# and number of packets per flow controlled by variable $FLOWLEN
#
basedir=`dirname $0`
source ${basedir}/functions.sh
root_check_run_with_sudo "$@"
# Parameter parsing via include
source ${basedir}/parameters.sh
# Set some default params, if they didn't get set
if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
if [ -n "$DEST_IP" ]; then
validate_addr${IP6} $DEST_IP
read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
fi
if [ -n "$DST_PORT" ]; then
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi
# NOTICE: Script specific settings
# =======
# Limiting the number of concurrent flows ($FLOWS)
# and also set how many packets each flow contains ($FLOWLEN)
#
[ -z "$FLOWS" ] && FLOWS="8000"
[ -z "$FLOWLEN" ] && FLOWLEN="10"
if [[ -n "$BURST" ]]; then
err 1 "Bursting not supported for this mode"
fi
# 198.18.0.0 / 198.19.255.255
read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15)
# General cleanup everything since last run
[ -z "$APPEND" ] && pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Base config
pg_set $dev "flag QUEUE_MAP_CPU"
pg_set $dev "count $COUNT"
pg_set $dev "clone_skb $CLONE_SKB"
pg_set $dev "pkt_size $PKT_SIZE"
pg_set $dev "delay $DELAY"
pg_set $dev "flag NO_TIMESTAMP"
# Single destination
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst${IP6}_min $DST_MIN"
pg_set $dev "dst${IP6}_max $DST_MAX"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
pg_set $dev "flag UDPDST_RND"
pg_set $dev "udp_dst_min $UDP_DST_MIN"
pg_set $dev "udp_dst_max $UDP_DST_MAX"
fi
[ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM"
# Randomize source IP-addresses
pg_set $dev "flag IPSRC_RND"
pg_set $dev "src_min $SRC_MIN"
pg_set $dev "src_max $SRC_MAX"
# Limit number of flows (max 65535)
pg_set $dev "flows $FLOWS"
#
# How many packets a flow will send, before flow "entry" is
# re-generated/setup.
pg_set $dev "flowlen $FLOWLEN"
#
# Flag FLOW_SEQ will cause $FLOWLEN packets from the same flow
# being send back-to-back, before next flow is selected
# incrementally. This helps lookup caches, and is more realistic.
#
pg_set $dev "flag FLOW_SEQ"
done
# Run if user hits control-c
function print_result() {
# Print results
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
echo "Device: $dev"
cat /proc/net/pktgen/$dev | grep -A2 "Result:"
done
}
# trap keyboard interrupt (Ctrl-C)
trap true SIGINT
if [ -z "$APPEND" ]; then
echo "Running... ctrl^C to stop" >&2
pg_ctrl "start"
print_result
else
echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
fi