Skip to main content

Browse the archive

swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
sort by:
Revision Author Date Message Commit Date
23c625c Ilya Dryomov 08 November 2018, 13:55:21 UTC libceph: assume argonaut on the server side No one is running pre-argonaut. In addition one of the argonaut features (NOSRCADDR) has been required since day one (and a half, 2.6.34 vs 2.6.35) of the kernel client. Allow for the possibility of reusing these feature bits later. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> 08 November 2018, 16:51:11 UTC
71f2cc6 Luis Henriques 05 November 2018, 19:00:52 UTC ceph: quota: fix null pointer dereference in quota check This patch fixes a possible null pointer dereference in check_quota_exceeded, detected by the static checker smatch, with the following warning:    fs/ceph/quota.c:240 check_quota_exceeded()     error: we previously assumed 'realm' could be null (see line 188) Fixes: b7a2921765cf ("ceph: quota: support for ceph.quota.max_files") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 08 November 2018, 16:51:11 UTC
c2c6d3c Luis Henriques 23 October 2018, 16:53:14 UTC ceph: add destination file data sync before doing any remote copy If we try to copy into a file that was just written, any data that is remote copied will be overwritten by our buffered writes once they are flushed.  When this happens, the call to invalidate_inode_pages2_range will also return a -EBUSY error. This patch fixes this by also sync'ing the destination file before starting any copy. Fixes: 503f82a9932d ("ceph: support copy_file_range file operation") Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 08 November 2018, 16:50:37 UTC
bb39ba6 Kuninori Morimoto 08 November 2018, 06:34:34 UTC sata_rcar: convert to SPDX identifiers This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 November 2018, 13:32:16 UTC
0033dfd Anton Ivanov 08 November 2018, 13:07:23 UTC ubd: fix missing initialization of io_req The SYNC path doesn't initialize io_req->error, which can cause random errors. Before the conversion to blk-mq, we always completed requests with BLK_STS_OK status, but now we actually look at the error field and this issue becomes apparent. Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> [axboe: fixed up commit message to explain what is actually going on] Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 November 2018, 13:16:09 UTC
d0ffb80 H. Peter Anvin (Intel) 22 October 2018, 16:19:05 UTC arch/alpha, termios: implement BOTHER, IBSHIFT and termios2 Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags using arbitrary flags. Because BOTHER is not defined, the general Linux code doesn't allow setting arbitrary baud rates, and because CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037. Resolve both problems by #defining BOTHER to 037 on Alpha. However, userspace still needs to know if setting BOTHER is actually safe given legacy kernels (does anyone actually care about that on Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even though they use the same structure. Define struct termios2 just for compatibility; it is the exact same structure as struct termios. In a future patchset, this will be cleaned up so the uapi headers are usable from libc. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: <linux-alpha@vger.kernel.org> Cc: <linux-serial@vger.kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 08 November 2018, 12:09:30 UTC
b00d209 Linus Torvalds 08 November 2018, 12:06:58 UTC Merge tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux Pull compiler attribute fixlets from Miguel Ojeda: "Small improvements to Compiler Attributes: - Define asm_volatile_goto for non-gcc compilers (Nick Desaulniers) - Improve the explanation of compiler_attributes.h" * tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux: Compiler Attributes: improve explanation of header include/linux/compiler*.h: define asm_volatile_goto 08 November 2018, 12:06:58 UTC
d50ffc5 Linus Torvalds 08 November 2018, 12:04:29 UTC Merge tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd Pull MTD fixes from Boris Brezillon: "MTD changes: - Kill a VLA in sa1100 SPI NOR changes: - Make sure ->addr_width is restored when SFDP parsing fails - Propate errors happening in cqspi_direct_read_execute() NAND changes: - Fix kernel-doc mismatch - Fix nanddev_neraseblocks() to return the correct value - Avoid selection of BCH_CONST_PARAMS when some users require dynamic BCH settings" * tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: Fix nanddev_pos_next_page() kernel-doc header mtd: sa1100: avoid VLA in sa1100_setup_mtd mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute() mtd: nand: Fix nanddev_neraseblocks() mtd: nand: drop kernel-doc notation for a deleted function parameter mtd: docg3: don't set conflicting BCH_CONST_PARAMS option 08 November 2018, 12:04:29 UTC
991a251 H. Peter Anvin 22 October 2018, 16:19:04 UTC termios, tty/tty_baudrate.c: fix buffer overrun On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does not do any limit checking on the tty_baudrate[] array, and in fact a buffer overrun is possible on both architectures. Add a limit check to prevent that situation. This will be followed by a much bigger cleanup/simplification patch. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Requested-by: Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 08 November 2018, 11:36:45 UTC
943210b Mikulas Patocka 23 October 2018, 15:28:28 UTC vt: fix broken display when running aptitude If you run aptitude on framebuffer console, the display is corrupted. The corruption is caused by the commit d8ae7242. The patch adds "offset" to "start" when calling scr_memsetw, but it forgets to do the same addition on a subsequent call to do_update_region. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: d8ae72427187 ("vt: preserve unicode values corresponding to screen characters") Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 08 November 2018, 11:36:40 UTC
24efee4 Miguel Ojeda 06 November 2018, 21:52:11 UTC Compiler Attributes: improve explanation of header Explain better what "optional" attributes are, and avoid calling them so to avoid confusion. Simply retain "Optional" as a word to look for in the comments. Moreover, add a couple sentences to explain a bit more the intention and the documentation links. Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 08 November 2018, 10:33:52 UTC
9c8e0a1 Eric W. Biederman 25 October 2018, 17:05:11 UTC mount: Prevent MNT_DETACH from disconnecting locked mounts Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote: > As per mount_namespaces(7) unprivileged users should not be able to look under mount points: > > Mounts that come as a single unit from more privileged mount are locked > together and may not be separated in a less privileged mount namespace. > > However they can: > > 1. Create a mount namespace. > 2. In the mount namespace open a file descriptor to the parent of a mount point. > 3. Destroy the mount namespace. > 4. Use the file descriptor to look under the mount point. > > I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8. > > The setup: > > $ sudo sysctl kernel.unprivileged_userns_clone=1 > kernel.unprivileged_userns_clone = 1 > $ mkdir -p A/B/Secret > $ sudo mount -t tmpfs hide A/B > > > "Secret" is indeed hidden as expected: > > $ ls -lR A > A: > total 0 > drwxrwxrwt 2 root root 40 Feb 12 21:08 B > > A/B: > total 0 > > > The attack revealing "Secret": > > $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A" > /proc/self/fd/4/: > total 0 > drwxr-xr-x 3 root root 60 Feb 12 21:08 B > > /proc/self/fd/4/B: > total 0 > drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret > > /proc/self/fd/4/B/Secret: > total 0 I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and disconnecting all of the mounts in a mount namespace. Fix this by factoring drop_mounts out of drop_collected_mounts and passing 0 instead of UMOUNT_SYNC. There are two possible behavior differences that result from this. - No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on the vfsmounts being unmounted. This effects the lazy rcu walk by kicking the walk out of rcu mode and forcing it to be a non-lazy walk. - No longer disconnecting locked mounts will keep some mounts around longer as they stay because the are locked to other mounts. There are only two users of drop_collected mounts: audit_tree.c and put_mnt_ns. In audit_tree.c the mounts are private and there are no rcu lazy walks only calls to iterate_mounts. So the changes should have no effect except for a small timing effect as the connected mounts are disconnected. In put_mnt_ns there may be references from process outside the mount namespace to the mounts. So the mounts remaining connected will be the bug fix that is needed. That rcu walks are allowed to continue appears not to be a problem especially as the rcu walk change was about an implementation detail not about semantics. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk> Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 08 November 2018, 07:05:32 UTC
0bb2ae1 Thomas Richter 29 October 2018, 08:11:33 UTC s390/perf: Change CPUM_CF return code in event init function The function perf_init_event() creates a new event and assignes it to a PMU. This a done in a loop over all existing PMUs. For each listed PMU the event init function is called and if this function does return any other error than -ENOENT, the loop is terminated the creation of the event fails. If the event is invalid, return -ENOENT to try other PMUs. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 08 November 2018, 06:58:16 UTC
e6a2d72 Juri Lelli 07 November 2018, 11:10:32 UTC posix-cpu-timers: Remove useless call to check_dl_overrun() check_dl_overrun() is used to send a SIGXCPU to users that asked to be informed when a SCHED_DEADLINE runtime overruns occur. The function is called by check_thread_timers() already, so the call in check_process_timers() is redundant/wrong (even though harmless). Remove it. Fixes: 34be39305a77 ("sched/deadline: Implement "runtime overrun signal" support") Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-rt-users@vger.kernel.org Cc: mtk.manpages@gmail.com Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Claudio Scordino <claudio@evidence.eu.com> Link: https://lkml.kernel.org/r/20181107111032.32291-1-juri.lelli@redhat.com 08 November 2018, 06:43:35 UTC
b25ddb0 Michał Mirosław 07 November 2018, 16:50:53 UTC qlcnic: remove assumption that vlan_tci != 0 VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 06:37:55 UTC
e84b479 Michał Mirosław 07 November 2018, 16:50:52 UTC ibmvnic: fix accelerated VLAN handling Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 06:36:21 UTC
df7342b Eric W. Biederman 25 October 2018, 14:04:18 UTC mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 08 November 2018, 06:30:30 UTC
25d202e Eric W. Biederman 22 October 2018, 15:21:38 UTC mount: Retest MNT_LOCKED in do_umount It was recently pointed out that the one instance of testing MNT_LOCKED outside of the namespace_sem is in ksys_umount. Fix that by adding a test inside of do_umount with namespace_sem and the mount_lock held. As it helps to fail fails the existing test is maintained with an additional comment pointing out that it may be racy because the locks are not held. Cc: stable@vger.kernel.org Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 08 November 2018, 06:14:21 UTC
b1870a6 David S. Miller 08 November 2018, 05:53:31 UTC Merge branch 'FDDI-defza-Fix-a-bunch-of-small-issues' Maciej W. Rozycki says: ==================== FDDI: defza: Fix a bunch of small issues Here is a bunch of small fixes addressing issues that I missed in my final round of testing. None of these affect run-time behaviour. One was actually found by the kbuild bot, which turned out to be more pedantic than my compiler. See individual change descriptions for details. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 05:53:31 UTC
8f5365e Maciej W. Rozycki 07 November 2018, 12:07:10 UTC FDDI: defza: Make the driver version string constant The driver version string is obviously not meant to be changed at run time, so mark it `const'. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 05:53:31 UTC
04453b6 Maciej W. Rozycki 07 November 2018, 12:07:05 UTC FDDI: defza: Move SMT Tx data buffer declaration next to its skb Move the temporary data buffer used when tapping into the SMT Tx queue from the outer function level into the conditional block it's actually used in and its containing skb is also declared, making the structure of code better. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 05:53:31 UTC
5f5fae3 Maciej W. Rozycki 07 November 2018, 12:06:59 UTC FDDI: defza: Add missing comment closing Fix: drivers/net/fddi/defza.h:238:1: warning: "/*" within comment [-Wcomment] by adding a missing comment closing. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 05:53:30 UTC
96ed82c Maciej W. Rozycki 07 November 2018, 12:06:52 UTC FDDI: defza: Fix SPDX annotation The SPDX annotation for this driver does not match the license text, which specifies GNU GPL 2 or later. Make the two match by correcting the SPDX tag. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 05:53:30 UTC
d2f007d Jann Horn 05 November 2018, 19:55:09 UTC userns: also map extents in the reverse map to kernel IDs The current logic first clones the extent array and sorts both copies, then maps the lower IDs of the forward mapping into the lower namespace, but doesn't map the lower IDs of the reverse mapping. This means that code in a nested user namespace with >5 extents will see incorrect IDs. It also breaks some access checks, like inode_owner_or_capable() and privileged_wrt_inode_uidgid(), so a process can incorrectly appear to be capable relative to an inode. To fix it, we have to make sure that the "lower_first" members of extents in both arrays are translated; and we have to make sure that the reverse map is sorted *after* the translation (since otherwise the translation can break the sorting). This is CVE-2018-18955. Fixes: 6397fac4915a ("userns: bump idmap limits to 340") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Tested-by: Eric W. Biederman <ebiederm@xmission.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> 08 November 2018, 05:51:16 UTC
de59fae Vasily Averin 08 November 2018, 03:36:23 UTC ext4: fix buffer leak in __ext4_read_dirblock() on error path Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.9 08 November 2018, 03:36:23 UTC
69e3629 David S. Miller 08 November 2018, 01:08:51 UTC Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-11-07 This series contains fixes to igb, i40e and ice drivers. Anirudh fixes an issue during rebuild of the ice driver, where we need to set the carrier state, as well as start or stop the queues all based on the link status. Removed functions that were duplicating current functionality in the VSI rebuild/replay framework. Dave fixes a potential resource collision during the remove path, so add a check to see if we are in the middle of a reset. Fixed the remove path to ensure we call netif_napi_del() to free vectors before we set vsi->netdev to NULL. Akeem fixes an issue when the receive or transmit pause parameter is set, results in link loss on the interface. Fixed the spelling of "Enabling" in error message. Victor fixes potential memory leak by also freeing the related VSI contexts in the unload path. Md Fahad fixes a flag during port VLAN insertion, which was not being set properly. Brett fixes a transmit timeout during stress due to the hardware tail and software tail were incorrectly out of sync. Miroslav Lichvar fixes the igb PHC timecounter update interval to be sure the timecounter is updated in time. Chinh fixes the req_speeds variable to be u16 instead of u8 so that it can handle all the link speeds. Jake fixes i40e to add back the missing feature flags, which was causing IP-in-IP offloads to be reported as not supported. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2018, 01:08:51 UTC
63237f8 Lyude Paul 02 November 2018, 01:51:49 UTC drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() [why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2018, 23:21:05 UTC
0e6613e Jerry (Fangzhi) Zuo 30 October 2018, 18:37:16 UTC drm/amd/display: Drop reusing drm connector for MST [why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2018, 23:20:56 UTC
8be17ac Jerry (Fangzhi) Zuo 30 October 2018, 18:28:49 UTC drm/amd/display: Cleanup MST non-atomic code workaround [why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2018, 23:20:49 UTC
108110a Evan Quan 07 November 2018, 01:16:07 UTC drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2018, 23:20:40 UTC
3c7eda0 Evan Quan 24 October 2018, 04:11:35 UTC drm/amd/powerplay: set a default fclk/gfxclk ratio Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2018, 23:20:32 UTC
f3587d7 Keith Busch 07 November 2018, 14:37:45 UTC block: Clear kernel memory before copying to user If the kernel allocates a bounce buffer for user read data, this memory needs to be cleared before copying it to the user, otherwise it may leak kernel memory to user space. Laurence Oberman <loberman@redhat.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 November 2018, 22:41:31 UTC
e31d36b Geert Uytterhoeven 07 November 2018, 09:47:57 UTC MAINTAINERS: Fix remaining pointers to obsolete libata.git libata.git no longer exists. Replace the remaining pointers to it by pointers to the block tree, which is where all libata development happens now. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 November 2018, 22:27:26 UTC
6961cd4 Jens Axboe 07 November 2018, 21:34:05 UTC ubd: fix missing lock around request issue We need to hold the device lock (and disable interrupts) while writing new commands, or we could be interrupted while that is happening and read invalid requests in the completion path. Fixes: 4e6da0fe8058 ("um: Convert ubd driver to blk-mq") Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 November 2018, 21:34:05 UTC
406e7f9 Geert Uytterhoeven 07 November 2018, 13:45:24 UTC Documentation: ABI: led-trigger-pattern: Fix typos - Spelling s/brigntess/brightness/, - Double "use". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> 07 November 2018, 20:43:46 UTC
3a40cfe Baolin Wang 07 November 2018, 05:42:58 UTC leds: trigger: Fix sleeping function called from invalid context We will meet below issue due to mutex_lock() is called in interrupt context. The mutex lock is used to protect the pattern trigger data, but before changing new pattern trigger data (pattern values or repeat value) by users, we always cancel the timer firstly to clear previous patterns' performance. That means there is no race in pattern_trig_timer_function(), so we can drop the mutex lock in pattern_trig_timer_function() to avoid this issue. Moreover we can move the timer cancelling into mutex protection, since there is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function(). BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) [<c020f19c>] (unwind_backtrace) from [<c020aecc>] (show_stack+0x10/0x14) [<c020aecc>] (show_stack) from [<c07affb8>] (dump_stack+0x7c/0x9c) [<c07affb8>] (dump_stack) from [<c02417d4>] (___might_sleep+0xf4/0x158) [<c02417d4>] (___might_sleep) from [<c07c92c4>] (mutex_lock+0x18/0x60) [<c07c92c4>] (mutex_lock) from [<c067b28c>] (pattern_trig_timer_function+0x1c/0x11c) [<c067b28c>] (pattern_trig_timer_function) from [<c027f6fc>] (call_timer_fn+0x1c/0x90) [<c027f6fc>] (call_timer_fn) from [<c027f944>] (expire_timers+0x94/0xa4) [<c027f944>] (expire_timers) from [<c027fc98>] (run_timer_softirq+0x108/0x15c) [<c027fc98>] (run_timer_softirq) from [<c02021cc>] (__do_softirq+0x1d4/0x258) [<c02021cc>] (__do_softirq) from [<c0224d24>] (irq_exit+0x64/0xc4) [<c0224d24>] (irq_exit) from [<c0268dd0>] (__handle_domain_irq+0x80/0xb4) [<c0268dd0>] (__handle_domain_irq) from [<c045e1b0>] (gic_handle_irq+0x58/0x90) [<c045e1b0>] (gic_handle_irq) from [<c02019f8>] (__irq_svc+0x58/0x74) Exception stack(0xeb483f60 to 0xeb483fa8) 3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408 3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98 3fa0: 60020013 ffffffff [<c02019f8>] (__irq_svc) from [<c0207e98>] (arch_cpu_idle+0x1c/0x38) [<c0207e98>] (arch_cpu_idle) from [<c0247ca8>] (do_idle+0x138/0x268) [<c0247ca8>] (do_idle) from [<c0248050>] (cpu_startup_entry+0x18/0x1c) [<c0248050>] (cpu_startup_entry) from [<402022ec>] (0x402022ec) Fixes: 5fd752b6b3a2 ("leds: core: Introduce LED pattern trigger") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> 07 November 2018, 20:43:25 UTC
df376b2 Johannes Thumshirn 07 November 2018, 13:58:14 UTC block: respect virtual boundary mask in bvecs With drivers that are settting a virtual boundary constrain, we are seeing a lot of bio splitting and smaller I/Os being submitted to the driver. This happens because the bio gap detection code does not account cases where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will split the bio unnecessarily. Cc: Jan Kara <jack@suse.cz> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 November 2018, 20:04:22 UTC
8575877 Linus Torvalds 07 November 2018, 19:39:07 UTC Merge tag 'hwmon-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Remove bogus __init annotations in ibmpowernv driver - Fix double-free in error handling of __hwmon_device_register() * tag 'hwmon-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ibmpowernv) Remove bogus __init annotations hwmon: (core) Fix double-free in __hwmon_device_register() 07 November 2018, 19:39:07 UTC
d6fd0ae Omar Sandoval 31 October 2018, 17:06:08 UTC Btrfs: fix missing delayed iputs on unmount There's a race between close_ctree() and cleaner_kthread(). close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it sees it set, but this is racy; the cleaner might have already checked the bit and could be cleaning stuff. In particular, if it deletes unused block groups, it will create delayed iputs for the free space cache inodes. As of "btrfs: don't run delayed_iputs in commit", we're no longer running delayed iputs after a commit. Therefore, if the cleaner creates more delayed iputs after delayed iputs are run in btrfs_commit_super(), we will leak inodes on unmount and get a busy inode crash from the VFS. Fix it by parking the cleaner before we actually close anything. Then, any remaining delayed iputs will always be handled in btrfs_commit_super(). This also ensures that the commit in close_ctree() is really the last commit, so we can get rid of the commit in cleaner_kthread(). The fstest/generic/475 followed by 476 can trigger a crash that manifests as a slab corruption caused by accessing the freed kthread structure by a wake up function. Sample trace: [ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0 [ 5657.080661] Oops: 0000 [#1] PREEMPT SMP [ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G W 4.19.0-rc8-default+ #323 [ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287 [ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000 [ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0 [ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000 [ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788 [ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200 [ 5657.099689] FS: 00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000 [ 5657.101032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0 [ 5657.103159] Call Trace: [ 5657.103776] shrink_inactive_list+0x194/0x410 [ 5657.104671] shrink_node_memcg.constprop.84+0x39a/0x6a0 [ 5657.105750] shrink_node+0x62/0x1c0 [ 5657.106529] try_to_free_pages+0x1a4/0x500 [ 5657.107408] __alloc_pages_slowpath+0x2c9/0xb20 [ 5657.108418] __alloc_pages_nodemask+0x268/0x2b0 [ 5657.109348] kmalloc_large_node+0x37/0x90 [ 5657.110205] __kmalloc_node+0x236/0x310 [ 5657.111014] kvmalloc_node+0x3e/0x70 Fixes: 30928e9baac2 ("btrfs: don't run delayed_iputs in commit") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add trace ] Signed-off-by: David Sterba <dsterba@suse.com> 07 November 2018, 19:17:45 UTC
d5596fd Jacob Keller 29 October 2018, 17:52:43 UTC i40e: enable NETIF_F_NTUPLE and NETIF_F_HW_TC at driver load The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This means the features are set as user-changeable, but are not set in the currently active feature list. This results in the features being disabled at the driver's initial load. Move the assignment after the initial assignment of hw_features, and assign to the local variable. This ensures that NETIF_F_NTUPLE and NETIF_F_HW_TC are marked as user-changeable, and also enables them by default when the driver loads. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 07 November 2018, 18:32:15 UTC
ba766b8 Jacob Keller 29 October 2018, 17:52:42 UTC i40e: restore NETIF_F_GSO_IPXIP[46] to netdev features Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 07 November 2018, 17:45:42 UTC
ffe4982 Chinh T Cao 05 November 2018, 20:18:35 UTC ice: Change req_speeds to be u16 Since the req_speeds field in struct ice_link_status is a u8, req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught by a coverity scan. Fix this by changing req_speeds to be u16. Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 07 November 2018, 17:37:28 UTC
e09d51a Linus Torvalds 07 November 2018, 17:13:34 UTC Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes that have come in, and one revert of a previous fix. I was a bit too trigger happy to enable PREEMPT on multi_v7_defconfig, and it ended up regressing at least BeagleBone XM boards. While we get that debugged for next merge window, let's disable it again. Beyond that: - Stratix change to fix multicast filtering - Minor DT fixes for Renesas and i.MX - Ethernet fix for a Renesas board (switching main interfaces) - Ethernet phy regulator fix for i.MX6SX" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: stratix10: fix multicast filtering ARM: defconfig: Disable PREEMPT again on multi_v7 arm64: dts: renesas: condor: switch from EtherAVB to GEther dt-bindings: arm: Fix RZ/G2E part number arm64: dts: renesas: r8a7795: add missing dma-names on hscif2 ARM: dts: imx6sx-sdb: Fix enet phy regulator ARM: dts: fsl: Fix improperly quoted stdout-path values ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node 07 November 2018, 17:13:34 UTC
ecb4d52 Linus Torvalds 07 November 2018, 17:05:58 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - hid.git is moving towards group maintainership (where group is myself and Benjamin Tissoires), therefore this pull request updates MAINTAINERS accordingly - fix for hid-asus config dependency from Arnd Bergmann - two device-specific quirks for i2c-hid from Julian Sax and Kai-Heng Feng - other few small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: fix up .raw_event() documentation HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override HID: moving to group maintainership model HID: alps: allow incoming reports when only the trackstick is opened Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS" HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel HID: hiddev: fix potential Spectre v1 07 November 2018, 17:05:58 UTC
53692ec Vasily Averin 07 November 2018, 16:14:35 UTC ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path Fixes: de05ca852679 ("ext4: move call to ext4_error() into ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.17 07 November 2018, 16:14:35 UTC
9bde0af Xulin Sun 06 November 2018, 08:42:19 UTC rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write pcf2127_i2c_gather_write() allocates memory as local variable for i2c_master_send(), after finishing the master transfer, the allocated memory should be freed. The kmemleak is reported: unreferenced object 0xffff80231e7dba80 (size 64): comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s) hex dump (first 32 bytes): 03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................ 00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P.............. backtrace: [<ffff000008221398>] create_object+0xf8/0x278 [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0 [<ffff00000821070c>] __kmalloc+0x1ac/0x348 [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8 [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850 [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348 [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8 [<ffff0000087eaad8>] rtc_set_time+0x80/0x138 [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610 [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848 [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8 [<ffff000008083ac0>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Xulin Sun <xulin.sun@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 07 November 2018, 16:13:56 UTC
7ce9a99 Maciej W. Rozycki 05 November 2018, 03:48:25 UTC rtc: hctosys: Add missing range error reporting Fix an issue with the 32-bit range error path in `rtc_hctosys' where no error code is set and consequently the successful preceding call result from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn makes any subsequent call to `hctosys_show' incorrectly report in sysfs that the system time has been set from this RTC while it has not. Set the error to ERANGE then if we can't express the result due to an overflow. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t") Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 07 November 2018, 16:13:55 UTC
fbb974b Hans de Goede 04 September 2018, 14:51:29 UTC rtc: cmos: Do not export alarm rtc_ops when we do not support alarms When there is no IRQ configured for the RTC, the rtc-cmos code does not support alarms, all alarm rtc_ops fail with -EIO / -EINVAL. The rtc-core expects a rtc driver which does not support rtc alarms to not have alarm ops at all. Otherwise the wakealarm sysfs attr will read as empty rather then returning an error, making it impossible for userspace to find out beforehand if alarms are supported. A system without an IRQ for the RTC before this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm [root@localhost ~]# After this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory [root@localhost ~]# This fixes gnome-session + systemd trying to use suspend-then-hibernate, which causes systemd to abort the suspend when writing the RTC alarm fails. BugLink: https://github.com/systemd/systemd/issues/9988 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 07 November 2018, 16:13:55 UTC
6bdc997 Vasily Averin 07 November 2018, 16:10:21 UTC ext4: fix buffer leak in ext4_xattr_move_to_block() on error path Fixes: 3f2571c1f91f ("ext4: factor out xattr moving") Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.23 07 November 2018, 16:10:21 UTC
a89f84a Olof Johansson 07 November 2018, 16:07:59 UTC Merge tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes ARM: dts: stratix10: fix multicast filtering On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This needs to be specified in DTS, otherwise the stmmac driver defaults to 64 buckets and initializes the filter incorrectly. As a result, e.g. valid IPv6 multicast traffic ends up being dropped. * tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: fix multicast filtering Signed-off-by: Olof Johansson <olof@lixom.net> 07 November 2018, 16:09:50 UTC
45ae932 Vasily Averin 07 November 2018, 16:07:01 UTC ext4: release bs.bh before re-using in ext4_xattr_block_find() bs.bh was taken in previous ext4_xattr_block_find() call, it should be released before re-using Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.26 07 November 2018, 16:07:01 UTC
ecaaf40 Vasily Averin 07 November 2018, 16:01:33 UTC ext4: fix buffer leak in ext4_xattr_get_block() on error path Fixes: dec214d00e0d ("ext4: xattr inode deduplication") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13 07 November 2018, 16:01:33 UTC
9be66f5 Olof Johansson 07 November 2018, 15:59:33 UTC Merge tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.20 * R-Car V3H (r8a77980) based Condor board - Switch from EtherAVB to GEther to match offical boards * RZ/G2E (ra8774c0) SoC: correct documentation of part number * R-Car H3 (r8a7795) SoC: reinstate all DMA channels on HSCIF2 * tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: condor: switch from EtherAVB to GEther dt-bindings: arm: Fix RZ/G2E part number arm64: dts: renesas: r8a7795: add missing dma-names on hscif2 Signed-off-by: Olof Johansson <olof@lixom.net> 07 November 2018, 15:59:33 UTC
af18e35 Vasily Averin 07 November 2018, 15:56:28 UTC ext4: fix possible leak of s_journal_flag_rwsem in error path Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.7 07 November 2018, 15:56:28 UTC
f26621e Borislav Petkov 05 November 2018, 09:33:07 UTC resource/docs: Complete kernel-doc style function documentation Add the missing kernel-doc style function parameters documentation. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: linux-tip-commits@vger.kernel.org Cc: rdunlap@infradead.org Fixes: b69c2e20f6e4 ("resource: Clean it up a bit") Link: http://lkml.kernel.org/r/20181105093307.GA12445@zn.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org> 07 November 2018, 15:47:47 UTC
9e46308 Theodore Ts'o 07 November 2018, 15:32:53 UTC ext4: fix possible leak of sbi->s_group_desc_leak in error path Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.18 07 November 2018, 15:32:53 UTC
214782d Joonas Lahtinen 07 November 2018, 13:34:09 UTC Merge tag 'gvt-fixes-2018-11-07' of https://github.com/intel/gvt-linux into drm-intel-fixes gvt-fixes-2018-11-07 - Fix invalidate of old ggtt entry (Hang) - Fix partial ggtt entry update in any order (Hang) - Fix one mask setting for chicken reg (Xinyun) - Fix eDP warning in guest (Longhe) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com 07 November 2018, 13:34:10 UTC
e531efa Zhao Wei Liew 01 November 2018, 01:32:46 UTC Documentation: cpufreq: Correct a typo Fix a typo in the admin-guide documentation for cpufreq. Signed-off-by: Zhao Wei Liew <zhaoweiliew@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 07 November 2018, 12:32:34 UTC
6ef28a0 Anson Huang 05 November 2018, 00:59:28 UTC cpufreq: imx6q: add return value check for voltage scale Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 07 November 2018, 12:31:07 UTC
8d72ee3 Viresh Kumar 29 October 2018, 07:17:40 UTC Documentation: cpu-freq: Frequencies aren't always sorted The order in which the frequencies are displayed in cpufreq stats depends on the order in which the frequencies were sorted in the frequency table provided to cpufreq core by the cpufreq driver. They can be completely unsorted as well. The documentation's claim that the stats will be sorted in descending order is hence incorrect and here is an attempt to fix it. Reported-by: Pavel <pavel2000@ngs.ru> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 07 November 2018, 12:29:04 UTC
f635e48 Quinn Tran 06 November 2018, 08:51:21 UTC scsi: qla2xxx: Initialize port speed to avoid setting lower speed This patch initializes port speed so that firmware does not set lower operating speed. Setting lower speed in firmware impacts WRITE perfomance. Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 07 November 2018, 02:09:59 UTC
aca49ee Martin K. Petersen 06 November 2018, 03:49:47 UTC Revert "scsi: ufs: Disable blk-mq for now" This reverts commit d87161bea405e3260377026ca8a704a3f68bd67a. The issues that forced us to disable blk_mq for ufs have been resolved. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 07 November 2018, 01:50:13 UTC
d08f44b Dave Airlie 06 November 2018, 23:32:53 UTC Merge tag 'exynos-drm-fixes-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Three regressions - Revert frame counter support . This patch fixes a issue which doesn't work extension and clone mode because some CRTC devices don't provide frame counter value properly. - Fix lack of fbdev on Rinato and trats boards. . This patch considers for connector to be registered by DSI after DRM device is registered, and also it makes fbdev initializaion to be done even if no connector at the moment. - Check for dsi->panel object correctly . This patch fixes checking for dsi->panel. of_drm_find_panel function returns panel object or error value so error value should be checked using IS_ERR macro. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1541407733-7632-1-git-send-email-inki.dae@samsung.com 06 November 2018, 23:33:00 UTC
d99de69 Dave Airlie 06 November 2018, 23:32:22 UTC Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes Single etnaviv fence fix for GPU recovery. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1541522424.2508.26.camel@pengutronix.de 06 November 2018, 23:32:30 UTC
1bfc204 Vasily Averin 06 November 2018, 22:45:02 UTC ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref() Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> 06 November 2018, 22:45:02 UTC
4f32c38 Theodore Ts'o 06 November 2018, 22:18:17 UTC ext4: avoid possible double brelse() in add_new_gdb() on error path Fixes: b40971426a83 ("ext4: add error checking to calls to ...") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.38 06 November 2018, 22:18:17 UTC
feaf264 Vasily Averin 06 November 2018, 22:01:36 UTC ext4: avoid buffer leak in ext4_orphan_add() after prior errors Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock") Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link") Cc: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.34 06 November 2018, 22:01:36 UTC
a675830 Vasily Averin 06 November 2018, 21:49:50 UTC ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty() ext4_mark_iloc_dirty() callers expect that it releases iloc->bh even if it returns an error. Fixes: 0db1ff222d40 ("ext4: add shutdown bit and check for it") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.11 06 November 2018, 21:49:50 UTC
5822e95 Alex Deucher 02 November 2018, 15:54:27 UTC drm/amdgpu/display/dce11: only enable FBC when selected Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:46:12 UTC
04b94af Alex Deucher 06 November 2018, 20:19:49 UTC drm/amdgpu/display/dm: handle FBC dc feature parameter Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:45:56 UTC
ce2127c Alex Deucher 06 November 2018, 20:10:37 UTC drm/amdgpu/display/dc: add FBC to dc_config Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:45:33 UTC
7875a22 Alex Deucher 06 November 2018, 19:44:29 UTC drm/amdgpu: add DC feature mask module parameter Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:45:23 UTC
689e7b3 Alex Deucher 02 November 2018, 15:51:50 UTC drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:45:08 UTC
3426d66 Alex Deucher 06 November 2018, 16:19:00 UTC drm/amdgpu/vega20: add CLK base offset In case we need to access CLK registers. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:25:51 UTC
02680ef Harry Wentland 07 October 2018, 14:01:23 UTC drm/amd/display: Stop leaking planes [Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:25:28 UTC
8ed4ec3 Shaokun Zhang 05 November 2018, 10:33:35 UTC drm/amd/display: Fix misleading buffer information RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:24:42 UTC
63088da Alex Deucher 06 November 2018, 21:06:32 UTC Revert "drm/amd/display: set backlight level limit to 1" This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 21:23:58 UTC
db6aee6 Vasily Averin 06 November 2018, 21:20:40 UTC ext4: fix possible inode leak in the retry loop of ext4_resize_fs() Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7 06 November 2018, 21:20:40 UTC
f348e22 Vasily Averin 06 November 2018, 21:16:01 UTC ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7 06 November 2018, 21:16:01 UTC
81bd415 Mathieu Malaterre 06 June 2018, 19:42:32 UTC watchdog/core: Add missing prototypes for weak functions The split out of the hard lockup detector exposed two new weak functions, but no prototypes for them, which triggers the build warning: kernel/watchdog.c:109:12: warning: no previous prototype for ‘watchdog_nmi_enable’ [-Wmissing-prototypes] kernel/watchdog.c:115:13: warning: no previous prototype for ‘watchdog_nmi_disable’ [-Wmissing-prototypes] Add the prototypes. Fixes: 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file") Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Babu Moger <babu.moger@oracle.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180606194232.17653-1-malat@debian.org 06 November 2018, 20:58:00 UTC
4c9b658 Miroslav Lichvar 26 October 2018, 17:13:00 UTC igb: shorten maximum PHC timecounter update interval The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9de65 ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Also, the PHC may be adjusted to run up to 6% faster than real time and the system clock up to 10% slower. Shorten the delay to 360 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:54:27 UTC
d944b46 Brett Creeley 26 October 2018, 17:40:59 UTC ice: Fix the bytecount sent to netdev_tx_sent_queue Currently if the driver does a TSO offload the bytecount sent to netdev_tx_sent_queue will be incorrect. This is because in ice_tso we overwrite the initial value that we set in ice_tx_map. This creates a mismatch between the Tx and Tx clean flow. In the Tx clean flow we calculate the bytecount (called total_bytes) as we clean the descriptors so the value used in the Tx clean path is correct. Fix this by using += in ice_tso instead of =. This fixes the mismatch in bytecount mentioned above. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
c585ea4 Brett Creeley 26 October 2018, 17:40:58 UTC ice: Fix tx_timeout in PF driver Prior to this commit the driver was running into tx_timeouts when a queue was stressed enough. This was happening because the HW tail and SW tail (NTU) were incorrectly out of sync. Consequently this was causing the HW head to collide with the HW tail, which to the hardware means that all descriptors posted for Tx have been processed. Due to the Tx logic used in the driver SW tail and HW tail are allowed to be out of sync. This is done as an optimization because it allows the driver to write HW tail as infrequently as possible, while still updating the SW tail index to keep track. However, there are situations where this results in the tail never getting updated, resulting in Tx timeouts. Tx HW tail write condition: if (netif_xmit_stopped(txring_txq(tx_ring) || !skb->xmit_more) writel(sw_tail, tx_ring->tail); An issue was found in the Tx logic that was causing the afore mentioned condition for updating HW tail to never happen, causing tx_timeouts. In ice_xmit_frame_ring we calculate how many descriptors we need for the Tx transaction based on the skb the kernel hands us. This is then passed into ice_maybe_stop_tx along with some extra padding to determine if we have enough descriptors available for this transaction. If we don't then we return -EBUSY to the stack, otherwise we move on and eventually prepare the Tx descriptors accordingly in ice_tx_map and set next_to_watch. In ice_tx_map we make another call to ice_maybe_stop_tx with a value of MAX_SKB_FRAGS + 4. The key here is that this value is possibly less than the value we sent in the first call to ice_maybe_stop_tx in ice_xmit_frame_ring. Now, if the number of unused descriptors is between MAX_SKB_FRAGS + 4 and the value used in the first call to ice_maybe_stop_tx in ice_xmit_frame_ring then we do not update the HW tail because of the "Tx HW tail write condition" above. This is because in ice_maybe_stop_tx we return success from ice_maybe_stop_tx instead of calling __ice_maybe_stop_tx and subsequently calling netif_stop_subqueue, which sets the __QUEUE_STATE_DEV_XOFF bit. This bit is then checked in the "Tx HW tail write condition" by calling netif_xmit_stopped and subsequently updating HW tail if the afore mentioned bit is set. In ice_clean_tx_irq, if next_to_watch is not NULL, we end up cleaning the descriptors that HW sets the DD bit on and we have the budget. The HW head will eventually run into the HW tail in response to the description in the paragraph above. The next time through ice_xmit_frame_ring we make the initial call to ice_maybe_stop_tx with another skb from the stack. This time we do not have enough descriptors available and we return NETDEV_TX_BUSY to the stack and end up setting next_to_watch to NULL. This is where we are stuck. In ice_clean_tx_irq we never clean anything because next_to_watch is always NULL and in ice_xmit_frame_ring we never update HW tail because we already return NETDEV_TX_BUSY to the stack and eventually we hit a tx_timeout. This issue was fixed by making sure that the second call to ice_maybe_stop_tx in ice_tx_map is passed a value that is >= the value that was used on the initial call to ice_maybe_stop_tx in ice_xmit_frame_ring. This was done by adding the following defines to make the logic more clear and to reduce the chance of mucking this up again: ICE_CACHE_LINE_BYTES 64 ICE_DESCS_PER_CACHE_LINE (ICE_CACHE_LINE_BYTES / \ sizeof(struct ice_tx_desc)) ICE_DESCS_FOR_CTX_DESC 1 ICE_DESCS_FOR_SKB_DATA_PTR 1 The ICE_CACHE_LINE_BYTES being 64 is an assumption being made so we don't have to figure this out on every pass through the Tx path. Instead I added a sanity check in ice_probe to verify cache line size and print a message if it's not 64 Bytes. This will make it easier to file issues if they are seen when the cache line size is not 64 Bytes when reading from the GLPCI_CNF2 register. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
25525b6 Dave Ertman 26 October 2018, 17:40:57 UTC ice: Fix napi delete calls for remove In the remove path, the vsi->netdev is being set to NULL before the call to free vectors. This is causing the netif_napi_del call to never be made. Add a call to ice_napi_del to the same location as the calls to unregister_netdev and just prior to them. This will use the reverse flow as the register and netif_napi_add calls. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
3108251 Anirudh Venkataramanan 26 October 2018, 17:40:56 UTC ice: Fix typo in error message Print should say "Enabling" instead of "Enaabling" Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
58297dd Md Fahad Iqbal Polash 26 October 2018, 17:40:55 UTC ice: Fix flags for port VLAN According to the spec, whenever insert PVID field is set, the VLAN driver insertion mode should be set to 01b which isn't done currently. Fix it. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
9ecd25c Anirudh Venkataramanan 26 October 2018, 17:40:54 UTC ice: Remove duplicate addition of VLANs in replay path ice_restore_vlan and active_vlans were originally put in place to reprogram VLAN filters in the replay path. This is now done as part of the much broader VSI rebuild/replay framework. So remove both ice_restore_vlan and active_vlans Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
33e055f Victor Raj 26 October 2018, 17:40:53 UTC ice: Free VSI contexts during for unload In the unload path, all VSIs are freed. Also free the related VSI contexts to prevent memory leaks. Signed-off-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
0f5d4c2 Akeem G Abodunrin 26 October 2018, 17:40:52 UTC ice: Fix dead device link issue with flow control Setting Rx or Tx pause parameter currently results in link loss on the interface, requiring the platform/host to be cold power cycled. Fix it. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:47 UTC
afd9d4a Anirudh Venkataramanan 26 October 2018, 17:40:51 UTC ice: Check for reset in progress during remove The remove path does not currently check to see if a reset is in progress before proceeding. This can cause a resource collision resulting in various types of errors. Check for reset in progress and wait for a reasonable amount of time before allowing the remove to progress. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:46 UTC
ce317dd Anirudh Venkataramanan 26 October 2018, 17:40:50 UTC ice: Set carrier state and start/stop queues in rebuild Set the carrier state post rebuild by querying the link status. Also start/stop queues based on link status. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 06 November 2018, 20:46:46 UTC
86a484b Leo Li 30 October 2018, 19:09:08 UTC drm/amd: Update atom_smu_info_v3_3 structure Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 06 November 2018, 20:44:46 UTC
a48777f Eial Czerwacki 05 November 2018, 17:31:54 UTC x86/vsmp: Remove dependency on pv_irq_ops vSMP dependency on pv_irq_ops has been removed some years ago, but the code still deals with pv_irq_ops. In short, "cap & ctl & (1 << 4)" is always returning 0, so all PARAVIRT/PARAVIRT_XXL code related to that can be removed. However, the rest of the code depends on CONFIG_PCI, so fix it accordingly. Rename set_vsmp_pv_ops to set_vsmp_ctl as the original name does not make sense anymore. Signed-off-by: Eial Czerwacki <eial@scalemp.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shai Fultheim <shai@scalemp.com> Cc: Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/1541439114-28297-1-git-send-email-eial@scalemp.com 06 November 2018, 20:35:11 UTC
b082f2d Kirill A. Shutemov 26 October 2018, 12:28:56 UTC x86/ldt: Remove unused variable in map_ldt_struct() Splitting out the sanity check in map_ldt_struct() moved page table syncing into a separate function, which made the pgd variable unused. Remove it. [ tglx: Massaged changelog ] Fixes: 9bae3197e15d ("x86/ldt: Split out sanity check in map_ldt_struct()") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-4-kirill.shutemov@linux.intel.com 06 November 2018, 20:35:11 UTC
a0e6e08 Kirill A. Shutemov 26 October 2018, 12:28:55 UTC x86/ldt: Unmap PTEs for the slot before freeing LDT pages modify_ldt(2) leaves the old LDT mapped after switching over to the new one. The old LDT gets freed and the pages can be re-used. Leaving the mapping in place can have security implications. The mapping is present in the userspace page tables and Meltdown-like attacks can read these freed and possibly reused pages. It's relatively simple to fix: unmap the old LDT and flush TLB before freeing the old LDT memory. This further allows to avoid flushing the TLB in map_ldt_struct() as the slot is unmapped and flushed by unmap_ldt_struct() or has never been mapped at all. [ tglx: Massaged changelog and removed the needless line breaks ] Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-3-kirill.shutemov@linux.intel.com 06 November 2018, 20:35:11 UTC
d52888a Kirill A. Shutemov 26 October 2018, 12:28:54 UTC x86/mm: Move LDT remap out of KASLR region on 5-level paging On 5-level paging the LDT remap area is placed in the middle of the KASLR randomization region and it can overlap with the direct mapping, the vmalloc or the vmap area. The LDT mapping is per mm, so it cannot be moved into the P4D page table next to the CPU_ENTRY_AREA without complicating PGD table allocation for 5-level paging. The 4 PGD slot gap just before the direct mapping is reserved for hypervisors, so it cannot be used. Move the direct mapping one slot deeper and use the resulting gap for the LDT remap area. The resulting layout is the same for 4 and 5 level paging. [ tglx: Massaged changelog ] Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-2-kirill.shutemov@linux.intel.com 06 November 2018, 20:35:11 UTC
042cb56 Tao Ren 05 November 2018, 22:35:40 UTC net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay This patch allows users to enable/disable internal TX and/or RX clock delay for BCM54616S PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay"). Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 November 2018, 19:16:58 UTC
45fd808 Ingo Molnar 06 November 2018, 19:03:11 UTC Merge tag 'perf-urgent-for-mingo-4.20-20181106' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent improvements and fixes from Arnaldo Carvalho de Melo: Intel PT SQL viewer: (Adrian Hunter) - Fall back to /usr/local/lib/libxed.so - Add Selected branches report - Add help window - Fix table find when table re-ordered Intel PT debug log (Adrian Hunter) - Add more event information - Add MTC and CYC timestamps perf record: (Andi Kleen) - Support weak groups, just like with 'perf stat' perf trace: (Arnaldo Carvalho de Melo) - Start augmenting raw_syscalls:{sys_enter,sys_exit}: goal is to have a generic, arch independent eBPF kernel component that is programmed with syscall table details, what to copy, how many bytes, pid, arg filters from the userspace via eBPF maps by the 'perf trace' tool that continues to use all its argument beautifiers, just taking advantage of the extra pointer contents. JVMTI: (Gustavo Romero) - Fix undefined symbol scnprintf in libperf-jvmti.so perf top: (Jin Yao) - Display the LBR stats in callchain entries perf stat: (Thomas Richter) - Handle different PMU names with common prefix arm64: Will (Deacon) - Fix arm64 tools build failure wrt smp_load_{acquire,release}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 06 November 2018, 19:03:11 UTC
e8a308e Vishal Verma 26 October 2018, 00:37:29 UTC acpi/nfit, x86/mce: Validate a MCE's address before using it The NFIT machine check handler uses the physical address from the mce structure, and compares it against information in the ACPI NFIT table to determine whether that location lies on an NVDIMM. The mce->addr field however may not always be valid, and this is indicated by the MCI_STATUS_ADDRV bit in the status field. Export mce_usable_address() which already performs validation for the address, and use it in the NFIT handler. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Arnd Bergmann <arnd@arndb.de> Cc: Dan Williams <dan.j.williams@intel.com> CC: Dave Jiang <dave.jiang@intel.com> CC: elliott@hpe.com CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org CC: linux-edac <linux-edac@vger.kernel.org> CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo <qiuxu.zhuo@intel.com> CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> CC: Ross Zwisler <zwisler@kernel.org> CC: stable <stable@vger.kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Tony Luck <tony.luck@intel.com> CC: x86-ml <x86@kernel.org> CC: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com 06 November 2018, 18:13:26 UTC
5d96c93 Vishal Verma 26 October 2018, 00:37:28 UTC acpi/nfit, x86/mce: Handle only uncorrectable machine checks The MCE handler for nfit devices is called for memory errors on a Non-Volatile DIMM and adds the error location to a 'badblocks' list. This list is used by the various NVDIMM drivers to avoid consuming known poison locations during IO. The MCE handler gets called for both corrected and uncorrectable errors. Until now, both kinds of errors have been added to the badblocks list. However, corrected memory errors indicate that the problem has already been fixed by hardware, and the resulting interrupt is merely a notification to Linux. As far as future accesses to that location are concerned, it is perfectly fine to use, and thus doesn't need to be included in the above badblocks list. Add a check in the nfit MCE handler to filter out corrected mce events, and only process uncorrectable errors. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Omar Avelar <omar.avelar@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Dan Williams <dan.j.williams@intel.com> CC: Dave Jiang <dave.jiang@intel.com> CC: elliott@hpe.com CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org CC: linux-edac <linux-edac@vger.kernel.org> CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo <qiuxu.zhuo@intel.com> CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> CC: Ross Zwisler <zwisler@kernel.org> CC: stable <stable@vger.kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Tony Luck <tony.luck@intel.com> CC: x86-ml <x86@kernel.org> CC: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20181026003729.8420-1-vishal.l.verma@intel.com 06 November 2018, 18:13:10 UTC
back to top