swh:1:snp:92f3f585b9ae79620ad8c41a332d6329b31fd381
Tip revision: 078c79d8734a9ed2860303a7c1662004284fe853 authored by Ron Burkey on 07 August 2022, 15:04:04 UTC
Fixed a potential string-overflow bug in yaASM. Removed timestamps from
Fixed a potential string-overflow bug in yaASM. Removed timestamps from
Tip revision: 078c79d
MISSION_PHASE_13-APS2.agc
### FILE="Main.annotation"
## Copyright: Public domain.
## Filename: MISSION_PHASE_13-APS2.agc
## Purpose: A module for revision 0 of BURST120 (Sunburst). It
## is part of the source code for the Lunar Module's
## (LM) Apollo Guidance Computer (AGC) for Apollo 5.
## Assembler: yaYUL
## Contact: Ron Burkey <info@sandroid.org>.
## Website: www.ibiblio.org/apollo/index.html
## Mod history: 2016-09-30 RSB Created draft version.
## 2016-10-29 MAS Transcribed
## 2016-10-31 RSB Typos.
## 2016-11-01 RSB More typos.
## 2016-12-06 RSB Comments proofed using octopus/ProoferComments,
## changes made.
## Page 754
# MISSION PHASE 13 EXERCISES THE ASCENT GUIDANCE EQUATIONS OF PROG 46
# THE PREREAD TASK IS SET TO OCCUR IN 140 SECS AT TIG-30 AND AVETOMID DONE
# THE PRE-APS2 PROG 34 IS EXECUTED AND KALCMANU JOB IS STARTED
# THE ENGINEON TASK IS STARTED AT TIG-30 AND IGN IS AT 170 SECS AFTER
# START OF MP13
# THE ASCENT GUIDANCE EQUATIONS START BETWEEN TIG+1 AND +2 SECS
# THE ASC FEED TEST STARTS AT TIG+9 AND TERMINATES 365 SECS LATER
BANK 27
EBANK= AMEMORY
MP13JOB TC FLAG1DWN
OCT 04000 # KNOCK DOWN RESTART FLAG
EXTEND
DCA TIME2 # PICK UP CURRENT TIME
DXCH TDEC
TC NEWMODEX # SET MODE
OCT 34
ZL # SET TDEC TO TIME AT TIG-30
CAF 140SECS # TIME TO TIGN-30
XCH L
DAS TDEC # TDEC =TIGN-30 FOR MIDTOAVE
CAF 140SECS
INHINT
TC WAITLIST # SET TASK FOR TIGN-30
EBANK= TDEC
2CADR TIG13-30
EXTEND
DCA TDEC
DXCH TIGN
EXTEND
DCA 30SECS13
DAS TIGN # DISPLAY TIGN FOR DOWNLINK.
RELINT
EXTEND
DCA MIDAVEAD # DO MIDTOAVE COMPUTATION
DXCH Z
EXTEND
DCA PREAP2AD # DO PRE-APS2 TO GET DESIRED ATTITUDE
DXCH Z # STORES VECTORS POINTVSM AND SCAXIS
TC INTPRET
SSP SET
## Page 755
RATEINDX # SET KALCMANU FOR ANGULAR RATE OF 5DEG/S
4
33D
EXIT
CAF PRIO16 # SET UP ATTITUDE MANEUVER JOB.
INHINT
TC FINDVAC
EBANK= MIS
2CADR VECPOINT
CAF BIT1
INHINT
TC WAITLIST # SET UP DFI T/M CALIBRATE TASK
EBANK= TDEC
2CADR DFICAL # DFICAL REQUIRES 14 SECS AND ENDS ITSELF
TC BANKCALL # PUT MP13 TO SLEEP-KALCMANU WILL WAKE
CADR ATTSTALL
TC CURTAINS # BAD END RETURN FROM KALCMANU
TC ENDOFJOB # WAIT FOR TIG-30 TASK TO INTERUPT
TIG13-30 CAF BIT1 # SET PREREAD FOR NOW
TC WAITLIST
EBANK= DVTOTAL
2CADR PREREAD
TC PHASCHNG # PREREAD RESTART PROTECTION
OCT 00335
CAF BIT11 # SEE IF ATTITUDE MANEUVER DONE
MASK FLAGWRD2
CCS A
TCF CURTJOB # NO-SET UP CURTAINS JOB
TC NEWMODEX
OCT 46 # SET MODE TO PROG46
CAF AVEG13AD # GENADR OF AVEG IN DVSELECT
TS DVSELECT
EXTEND
DCA SVEX13AD # 2CADR SERVEXIT IN AVEGEXIT
DXCH AVGEXIT
EXTEND
DCA MP13TMAD
DXCH DVMNEXIT # SET MP RETURN FOR ENGINE SHUT DOWN
## Page 756
TC IBNKCALL
CADR ENGINOF1
TC 1LMP+DT
DEC 134 # ENGINE SELECT-APS ARM
DEC 1750 # DELAY 17.5 SECS
TC IBNKCALL
CADR ULLAGE # COMMAND 4 JET ULLAGE-ON
TC FIXDELAY
DEC 1250 # DELAY 12.5 SECS TO IGNITION
TIG13 TC IBNKCALL
CADR APSENGON
TC FIXDELAY
DEC 50 # DELAY .5 SECS
TC IBNKCALL
CADR NOULLAGE # ULLAGE JETS OFF AT TIG + .5
# NOW THAT THE ENGINE IS ON AND ULLAGE IS OFF, SET UP DUMMY MP 13 & PUT RESTARTABILITY FLAG UP:
TC 2PHSCHNG
OCT 00313 # 3.31 SPOT IS DUMMY13 TASK.
OCT 2 # GROUP 2 OFF.
CAF BIT13
TC SETRSTRT # SET RESTART FLAG
TC FIXDELAY
DEC 250 # DELAY 2.5 SECS AND START GUIDANCE
EXTEND
DCA ATMAGAD
DXCH AVGEXIT # SET AVEG LOOP TO THRUST MAGNITUDE FILTER
TC FIXDELAY
DEC 600 # START FEED TEST ROUTINE
TC FEEDTEST # START FEED TEST ROUTINE
EXTEND
DCA 342SECS
TC LONGCALL
EBANK= TDEC
2CADR MP13+544
TCGP2OFF TCF GRP2OFF
MP13+544 TC FEEDREST # DO FEED TEST RESET ROUTINE
## Page 757
GRP2OFF CS ZERO
ZL
DXCH -PHASE2
TC TASKOVER # WAIT FOR GUIDANCE TO DO ENGINE OFF
MP13TERM CAF BIT1 # SET MP13 TERMINAL TASKS
INHINT
TC WAITLIST
EBANK= TDEC
2CADR MP13OUT
TC POSTJUMP
CADR SERVEXIT
MP13OUT TC IBNKCALL # DEADBAND SELECT - MAX
CADR SETMAXDB
TC FEEDREST # DO THIS IN CASE OF EARLY ENG SHUT DOWN
TC FIXDELAY
DEC 100 # DELAY 1 SEC
TC 1LMP
DEC 135 # APS ARM OFF
TC FIXDELAY
DEC 2900 # DELAY 29 SECS TO KILL AVEG
TC FLAG1DWN # KILL AVE G
OCT 1
TC TASKOVER # MISSION PHASE 13 COMPLETE
1SEC13 DEC 100
2SECS13 DEC 200
12SECS13 DEC 1200
30SECS13 2DEC 3000
140SECS DEC 14000
342SECS 2DEC 34200 # 342 SECONDS
AVEG13AD GENADR AVERAGEG
EBANK= TDEC
PREAP2AD 2CADR PREAPS2
EBANK= TDEC
MP13TMAD 2CADR MP13TERM
EBANK= TDEC
## Page 758
ATMAGAD 2CADR ATMAG
EBANK= DVTOTAL
SVEX13AD 2CADR SERVEXIT
## Page 759
CURTJOB CAF PRIO37 # SET UP JOB TO GO TO CURTAINS
TC NOVAC
EBANK= SFAIL
2CADR CURTAINS
TC TASKOVER
DFICAL TC 1LMP+DT # LMP COMMAND
DEC 236 # DFI T/M CALIBRATE - ON
DEC 1200 # DELAY 12 SECS
TC 2LMP+DT # LMP COMMANDS
DEC 237 # DFI T/M CALIBRATE - OFF
DEC 198 # MASTER C+W ALARM RESET - COMMAND
DEC 200 # DELAY 2.0 SECONDS
TC 1LMP # LMP COMMAND
DEC 199 # MASTER C+W ALARM RESET - COMMAND RESET
TC TASKOVER # TERMINATE DFI CALIBRATE TASK
## Page 760
FEEDTEST EXTEND
QXCH MPRETRN
TC FLAG2UP # SET ASC FEED TEST FLAG
OCT 200
TC 1LMP+DT # TIME T
DEC 126 # RCS ASCENT FEED VALVE - ARM
DEC 100 # DELAY 1 SEC
TC 2LMP+DT # T+1
DEC 60 # RCS ASCENT FEED VALVES8 SYS A-OPEN
DEC 172 # RCS MAIN S/O VALVES SYS A-CLOSE
DEC 200 # DELAY FOR 2 SECS
TC 2LMP+DT # T+3
DEC 61 # RCS ASCENT FEED VALVES SYS A-OPEN RESET
DEC 173 # RCS MAIN S/O VALVES SYS A-CLOSE RESET
DEC 800 # DELAY FOR 8 SECS
TC 2LMP+DT # T+11
DEC 62 # RCS ASCENT FEED VALVES SYS B-OPEN
DEC 174 # RCS MAIN S/O VALVES SYS B -CLOSE
DEC 200 # DELAY FOR 2 SECS
TC 2LMP+DT # T+13
DEC 63 # RCS ASCENT FEED VALVES SYS B-OPEN RESET
DEC 175 # RCS MAIN S/O VALVES SYS B-CLOSE RESET
DEC 800 # DELAY 8 SECS
TC 1LMP+DT # T+21
DEC 252 # RCS MANIFOLD CROSSFEED VALVES-OPEN
DEC 200 # DELAY FOR 2 SECS
TC 1LMP # T+23
DEC 253 # RCS MANIFOLD CROSSFEED VALVES-OPEN RESET
TC MPRETRN
## Page 761
FEEDREST CS FLAGWRD2 # CHECK FEED TEST FLAG
MASK BIT8
CCS A
TC Q # FLAG DOWN-NO RESET
EXTEND # FLAG UP - DO FEED TEST RESET
QXCH MPRETRN
TC FLAG2DWN # FEED TEST FLAG DOWN
OCT 200
TC 1LMP+DT # TIME T
DEC 254 # RCS MANIFOLD CROSSFEED VALVES -CLOSE
DEC 100 # DELAY 1 SEC
TC 2LMP+DT # T+1
DEC 188 # RCS MAIN S/O VALVES SYS A-OPEN
DEC 76 # RCS ASCENT FEED VALVES SYS A-CLOSE
DEC 100 # DELAY 1 SECS
TC 1LMP+DT # T+2
DEC 255 # RCS MANIFOLD CROSSFEED VALVES-CLOSE RESE
DEC 100 # DELAY 1 SEC
TC 2LMP+DT # T+3
DEC 189 # RCS MAIN S/O VALVES SYS A-OPEN RESET
DEC 77 # RCS ASCENT FEED VALVES SYS A-CLOSE RESET
DEC 800 # DELAY 8 SECS
TC 2LMP+DT # T+11
DEC 190 # RCS MAIN S/O VALVES SYS B-OPEN
DEC 78 # RCS ASCENT FEED VALVES SYS B-CLOSE
DEC 100 # DELAY 1 SEC
TC 1LMP+DT # T+12
DEC 127 # RCS ASCENT FEED VALVE-SAFE
DEC 100 # DELAY 1 SEC
TC 2LMP # T+13
DEC 191 # RCS MAIN S/O VALVES SYS B-OPEN RESET
DEC 79 # RCS ASCENT FEED VALVES SYS B-CLOSE RESET
TC MPRETRN # RETURN TO MISSION PROGRAM
## Page 762
# COME HERE IF WE GET A RESTART AFTER THE ENGINE IS ON & ULLAGE IS OFF. SET UP SERVICER SWITCHES TO CAUSE THE
# BURN TO CONTINUE UNTIL PROPELLANT DEPLETION (UNLESS INTERRUPTED BY ENGINE FAILURE OR V74). EXIT TO POOH AFTER
# SHUTDOWN IS DETECTED.
EBANK= TTGO
DUMMY13 EXTEND
DCA SVEX13AD
DXCH AVGEXIT
CAF TCGP2OFF # TO FINISH FEED TEST OR RESET (WHICH ARE
TS MPRETRN # IN GROUP 2)
EXTEND
DCA D13TRMAD
DXCH DVMNEXIT
TC FLAG1DWN # TO GET SERVICER TO RETURN THRU DVMNEXIT
OCT 00020 # WHATEVER CAUSES SHUTDOWN.
CA PGNSCADR
TS DVSELECT # (SHOULD BE THERE ALREADY.)
TC NEWMODEX # DISPLAY PROGRAM 47.
OCT 47
CA POSMAX # DISPLAY LARGE TIME TO GO FOR DOWNLINK.
TS TTGO
TS TTGO +1
TC TASKOVER
EBANK= TTGO
D13TRMAD 2CADR DMY13TRM
DMY13TRM TC PHASCHNG
OCT 40333 # 3.33 IS TRMDMY13 TASK.
INHINT
CA 25SEC # INSURE THAT FEED ROUTINES ARE FINISHED.
TC WAITLIST
EBANK= TTGO
2CADR TRMDMY13
TC ENDOFJOB
TRMDMY13 TC IBNKCALL
CADR ENGINOFF
TC 1LMP
## Page 763
DEC 135 # ENGINE SELECT - ASCENT ARM OFF*
TC 2PHSCHNG
OCT 00003
OCT 05012
OCT 77777
TC FEEDREST
TC FLAG1DWN # AVERAGE G OFF & EXIT VIA POOH.
OCT 00001
TC TASKOVER
25SEC DEC 2500
