swh:1:snp:92f3f585b9ae79620ad8c41a332d6329b31fd381
Tip revision: 078c79d8734a9ed2860303a7c1662004284fe853 authored by Ron Burkey on 07 August 2022, 15:04:04 UTC
Fixed a potential string-overflow bug in yaASM. Removed timestamps from
Fixed a potential string-overflow bug in yaASM. Removed timestamps from
Tip revision: 078c79d
IMU_MODE_SWITCHING_ROUTINES.agc
### FILE="Main.annotation"
## Copyright: Public domain.
## Filename: IMU_MODE_SWITCHING_ROUTINES.agc
## Purpose: A section of Sunburst revision 37, or Shepatin revision 0.
## It is part of an early development version of the software
## for Apollo Guidance Computer (AGC) on the unmanned Lunar
## Module (LM) flight Apollo 5. Sunburst 37 was the program
## upon which Don Eyles's offline development program Shepatin
## was based; the listing herein transcribed was actually for
## the equivalent revision 0 of Shepatin.
## This file is intended to be a faithful transcription, except
## that the code format has been changed to conform to the
## requirements of the yaYUL assembler rather than the
## original YUL assembler.
## Reference: pp. 124-145
## Assembler: yaYUL
## Contact: Ron Burkey <info@sandroid.org>.
## Website: www.ibiblio.org/apollo/index.html
## Mod history: 2017-05-24 MAS Created from Sunburst 120.
## 2017-05-30 HG Transcribed
## 2017-06-21 RSB Proofed using octopus/ProoferComments.
## Page 124
BLOCK 02
EBANK= COMMAND
# FIXED-FIXED ROUTINES.
ZEROICDU CAF ZERO # ZERO ICDU COUNTERS.
TS CDUX
TS CDUY
TS CDUZ
TC Q
4SECS DEC 400
3SECS DEC 300
## Page 125
# IMU ZEROING ROUTINE.
BANK 13
IMUZERO INHINT # ROUTINE TO ZERO ICDUS.
CS DSPTAB +11D # DONT ZERO CDUS IF IMU IN GIMBAL LOCK AND
MASK BITS4&6 # COARSE ALIGN.
CCS A
TCF IMUZEROA
TC ALARM # IF SO.
OCT 206
TCF CAGETSTJ +4
IMUZEROA CS IMUSEFLG
MASK STATE # PROGRAM IS USING THE IMU.
AD IMUSEFLG
TS STATE
TC CAGETSTQ # IF IMU COMING UP, TURN-ON PROGRAM WILL
TCF MODEEXIT # DO ALL THE WORK.
CS BITS3&4 # INHIBIT ICDUFAIL AND IMUFAIL (IN CASE WE
MASK IMODES30 # JUST CAME OUT OF COARSE ALIGN).
AD BITS3&4
TS IMODES30
CS BITS4&6 # SEND ZERO ENCODE WITH COARSE AND ERROR
EXTEND # COUNTER DISABLED.
WAND 12
TC NOATTOFF # TURN OFF NO ATT LAMP.
CAF BIT5
EXTEND
WOR 12
CAF BIT6 # WAIT 320 MS TO GIVE AGS ADEQUATE TIME TO
TC WAITLIST # RECEIVE ITS PULSE TRAIN.
EBANK= COMMAND
2CADR IMUZERO2
CS IMODES30 # SEE IF IMU OPERATING AND ALARM IF NOT.
MASK BIT9
CCS A
TCF MODEEXIT
TC ALARM
OCT 210
## Page 126
MODEEXIT RELINT # GENERAL MODE-SWITCHING EXIT.
TCF SWRETURN
## Page 127
IMUZERO2 TC CAGETSTQ # POSSIBLY SWITCH TO TURN-ON PROGRAM.
TCF TASKOVER
TC ZEROICDU # ZERO COUNTERS.
CS BIT5 # REMOVE ZERO DISCRETE.
EXTEND
WAND 12
CAF 4SECS
TC VARDELAY
IMUZERO3 TC CAGETSTQ
TCF TASKOVER
CS BITS3&4 # REMOVE IMUFAIL AND ICDUFAIL INHIBIT.
MASK IMODES30
TS IMODES30
TC IBNKCALL # SET ISS WARNING IF EITHER OF ABOVE ARE
CADR SETISSW # PRESENT.
TCF ENDIMU
## Page 128
# IMU COARSE ALIGN MODE.
IMUCOARS INHINT
TC SETCOARS
CAF SIX
TC WAITLIST
EBANK= COMMAND
2CADR COARS
TCF MODEEXIT
COARS TC CAGETEST
CAF BIT6 # ENABLE ALL THREE ISS CDU ERROR COUNTERS
EXTEND
WOR CHAN12
CAF TWO # SET CDU INDICATOR
COARS1 TS CDUIND
INDEX CDUIND # COMPUTE THETAD - THETAA IN 1:S
CA THETAD # COMPLEMENT FORM
EXTEND
INDEX CDUIND
MSU CDUX
EXTEND
MP BIT13 # SHIFT RIGHT 2
XCH L # ROUND
DOUBLE
TS ITEMP1
TCF +2
ADS L
INDEX CDUIND # DIFFERENCE TO BE COMPUTED
LXCH COMMAND
CCS CDUIND
TC COARS1
CAF TWO # MINIMUM OF 4 MS WAIT
TC VARDELAY
## Page 129
COARS2 TC CAGETEST # DONT CONTINUE IF CAGED.
TS ITEMP1 # SETS TO +0.
CAF TWO # SET CDU INDICATOR
+3 TS CDUIND
INDEX CDUIND
CCS COMMAND # NUMBER OF PULSES REQUIRED
TC COMPOS # GREATER THAN MAX ALLOWED
TC NEXTCDU +1
TC COMNEG
TC NEXTCDU +1
COMPOS AD -COMMAX # COMMAX = MAX NUMBER OF PULSES ALLOWED
EXTEND # MINUS ONE
BZMF COMZERO
INDEX CDUIND
TS COMMAND # REDUCE COMMAND BY MAX NUMBER OF PULSES
CS -COMMAX- # ALLOWED
NEXTCDU INCR ITEMP1
INDEX CDUIND
TS CDUXCMD # SET UP COMMAND REGISTER.
CCS CDUIND
TC COARS2 +3
CCS ITEMP1 # SEE IF ANY PULSES TO GO OUT.
TCF SENDPULS
TC FIXDELAY # WAIT FOR GIMBALS TO SETTLE.
DEC 150
## Page 130
CAF TWO # AT END OF COMMAND, CHECK TO SEE THAT
CHKCORS TS ITEMP1 # GIMBALS ARE WITHIN 2 DEGREES OF THETAD.
INDEX A
CA CDUX
EXTEND
INDEX ITEMP1
MSU THETAD
CCS A
TCF COARSERR
TCF CORSCHK2
TCF COARSERR
CORSCHK2 CCS ITEMP1
TCF CHKCORS
TS GCOMP # ZERO GYRO COMPENSATION REGISTERS IN
TS GCOMP +1 # PREPARATION FOR COMPENSATION.
TS GCOMP +2
TS GCOMP +3
TS GCOMP +4
TS GCOMP +5
TCF ENDIMU # END OF COARSE ALIGNMENT.
COARSERR AD COARSTOL # 2 DEGREES.
EXTEND
BZMF CORSCHK2
TC ALARM # COARSE ALIGN ERROR.
OCT 211
TCF IMUBAD
COARSTOL DEC -.01111 # 2 DEGREES SCALED AT HALF-REVOLUTIONS.
## Page 131
COMNEG AD -COMMAX
EXTEND
BZMF COMZERO
COM
INDEX CDUIND
TS COMMAND
CA -COMMAX-
TC NEXTCDU
COMZERO CAF ZERO
INDEX CDUIND
XCH COMMAND
TC NEXTCDU
SENDPULS CAF 13,14,15
EXTEND
WOR CHAN14
CAF 600MS
TCF COARS2 -1 # AND THEN TO VARDELAY.
SETCOARS CS BIT6 # CLEAR ERROR COUNTER BEFORE MODE SWITCH.
EXTEND
WAND 12
CAF BIT4 # PUT ISS IN COARSE ALIGN.
EXTEND
WOR 12
CS OCT40010 # TURN ON NO ATT LAMP.
MASK DSPTAB +11D
AD OCT40010
TS DSPTAB +11D
CS BIT4 # INHIBIT IMU FAIL.
MASK IMODES30
AD BIT4
TS IMODES30
TC Q
OCT40010 OCT 40010
## Page 132
# IMU FINE ALIGN MODE SWITCH.
IMUFINE INHINT
TC CAGETSTJ # SEE IF IMU BEING CAGED.
CS BITS4-6 # RESET ZERO, COARSE, AND ECTR ENABLE.
EXTEND
WAND 12
TC NOATTOFF # TURN OFF NO ATT LAMP.
CAF BIT10 # IMU FAIL WAS INHIBITED DURING THE
TC WAITLIST # PRESUMABLY PRECEDING COARSE ALIGN. LEAVE
EBANK= COMMAND
2CADR IFAILOK # IT ON FOR THE FIRST 5 SECS OF FINE ALIGN
CAF 90SEC # GYRO RE-CENTERING TIME.
TC WAITLIST
EBANK= COMMAND
2CADR IMUFINED
TCF MODEEXIT
IMUFINED TC CAGETEST # SEE THAT NO ONE HAS CAGED THE IMU.
TCF ENDIMU
IFAILOK TC CAGETSTQ # ENABLE IMU FIAL UNLESS IMU BEING CAGED.
TCF TASKOVER # IT IS.
CAF BIT4 # DONT RESET IMU FAIL INHIBIT IF SOMEONE
EXTEND # HAS GONE INTO COARSE ALIGN.
RAND 12
CCS A
TCF TASKOVER
CS BIT4
PFAILOK2 MASK IMODES30
TS IMODES30
TC IBNKCALL # THE ISS WARNING LIGHT MAY COME ON NOW
CADR SETISSW # THAT THE INHIBIT HAS BEEN REMOVED.
TCF TASKOVER
PFAILOK TC CAGETSTQ # ENABLE PIP FAIL PROG ALARM.
TCF TASKOVER
CS BIT10 # MAKE PREVIOUS VALUE OF PIPA FAIL THE
MASK IMODES30 # NO FAIL STATE SO THAT IF THE FAILURE
AD BIT10 # INDICATION IS ON NOW, IT WILL BE PICKED
TS IMODES30 # UP (ROUTINE DETECTS ONLY CHANGES).
## Page 133
CS BIT13 # PIPA FAIL BIT IS KEPT IN TWO PLACES FOR
MASK IMODES33
AD BIT13
TS IMODES33
CS BIT5
TCF PFAILOK2
NOATTOFF CS OCT40010 # TURN OFF NO ATT LAMP.
MASK DSPTAB +11D
AD BIT15
TS DSPTAB +11D
TC Q
## Page 134
# ROUITNES TO INITIATE AND TERMINATE PROGRAM USE OF THE PIPAS. NO IMUSTALL REQUIRED IN EITHER CASE.
PIPUSE TC CAGETSTQ # DONT ENABLE PIPA FAIL IF IMU BEING CAGED
TCF SWRETURN
INHINT
CAF ZERO # ZERO COUNTERS.
TS PIPAX
TS PIPAY
TS PIPAZ
CS BIT1 # IF PIPA FAILS FROM NOW ON (UNTIL
MASK IMODES30 # PIPFREE), LIGHT ISS WARNING.
TS IMODES30
PIPFREE2 TC IBNKCALL # ISS WARNING MIGHT COME ON NOW.
CADR SETISSW # (OR GO OFF ON PIPFREE).
TCF MODEEXIT
PIPFREE INHINT # PROGRAM DONE WITH PIPAS. DONT LIGHT
CS BIT1 # ISS WARNING.
MASK IMODES30
AD BIT1
TS IMODES30
MASK BIT10 # IF PIP FAIL ON, DO PROG ALSRM AND RESET
CCS A # ISS WARNING.
TCF MODEEXIT
TC ALARM
OCT 212
INHINT
TCF PIPFREE2
## Page 135
# THE FOLLOWING ROUTINE TORQUES THE IRIGS ACCORDING TO DOUBLE PRECISION INPUTS IN THE SIX REGISTERS
# BEGINNING AT THE ECADR ARRIVING IN A. THE MINIMUM SIZE OF ANY PULSE TRAIN IS 16 PULSES (.25 CDU COUNTS). THE
# UNSENT PORTION OF THE COMMAND IS LEFT INTACT IN THE INPUT COMMAND REGISTERS.
EBANK= 1400 # VARIABLE, ACTUALLY.
IMUPULSE TS MPAC +5 # SAVE ARRIVING ECADR.
TC CAGETSTJ # DONT PROCEED IF IMU BEING CAGED.
CCS LGYRO # SEE IF GYROS BUSY.
TC GYROBUSY # SLEEP.
TS MPAC +2
CAF BIT6 # ENABLE THE POWER SUPPLY.
EXTEND
WOR 14
CAF FOUR
GWAKE2 INHINT # (IF A JOB WAS PUT TO SLEEP, THE POWER
TC WAITLIST # SUPPLY IS LEFT ON BY THE WAKING JOB).
EBANK= COMMAND
2CADR STRTGYRO
CA MPAC +5 # SET UP EBANK, SAVING CALLER'S EBANK FOR
XCH EBANK # RESTORATION ON RETURN.
XCH MPAC +5
TS LGYRO # RESERVES GYROS.
MASK LOW8
TS ITEMP1
CAF TWO # FORCE SIGN AGREEMENT ON INPUTS.
GYROAGRE TS MPAC +3
DOUBLE
AD ITEMP1
TS MPAC +4
EXTEND
INDEX A
DCA 1400
DXCH MPAC
TC TPAGREE
DXCH MPAC
INDEX MPAC +4
DXCH 1400
CCS MPAC +3
TCF GYROAGRE
CA MPAC +5 # RESTORE CALLER'S EBANK.
TS EBANK
TCF MODEEXIT
## Page 136
# ROUTINES TO ALLOW TORQUING BY ONLY ONE JOB AT A TIME.
GYROBUSY EXTEND # SAVE RETURN 2FCADR.
DCA BUF2
DXCH MPAC
REGSLEEP CAF LGWAKE
TCF JOBSLEEP
GWAKE CCS LGYRO # WHEN AWAKENED, SEE IF GYROS STILL BUSY.
TCF REGSLEEP # IF SO, SLEEP SOME MORE.
TS MPAC +2
EXTEND
DCA MPAC
DXCH BUF2 # RESTORE SWRETURN INFO.
CAF ONE
TCF GWAKE2
LGWAKE CADR GWAKE
## Page 137
# GYRO-TORQUING WAITLIST TASKS.
STRTGYRO CS GDESELCT # DE-SELECT LAST GYRO.
EXTEND
WAND 14
TC CAGETEST
STRTGYR2 CA LGYRO # JUMP ON PHASE COUNTER IN BITS 13-14.
EXTEND
MP BIT4
INDEX A
TCF +1
TC GSELECT # =0. DO Y GYRO.
OCT 00202
TC GSELECT # =1. DO Z GYRO.
OCT 00302
TC GSELECT -2 # =2. DO X GYRO.
OCT 00100
CAF ZERO # =3. DONE
TS LGYRO
CAF LGWAKE # WAKE A POSSIBLE SLEEPING JOB.
TC JOBWAKE
CAF BIT2 # DONT RESET POWER SUPPLY IF BIT SET
MASK IMODES33 # (ONLY DURING GYRO TORQUE SCALE FACTOR
CCS A # TEST).
TCF NORESET
CCS LOCCTR # IF A JOB WAS AWAKENED, DONT RESET GYRO
TCF NORESET # ENABLE.
TCF NORESET
CS BIT6 # IF NO JOB AWAKENED, RESET GYRO ENABLE.
EXTEND
WAND 14
NORESET TCF IMUFINED
## Page 138
-2 CS FOUR # SPECIAL ENTRY TO REGRESS LGYRO FOR X.
ADS LGYRO
GSELECT INDEX Q # SELECT GYRO.
CAF 0 # PACKED WORD CONTAINS GYRO SELECT BITS
TS ITEMP4 # AND INCREMENT TO LGYRO.
MASK SEVEN
AD BIT13
ADS LGYRO
TS EBANK
MASK LOW8
TS ITEMP1
CS SEVEN
MASK ITEMP4
TS ITEMP4
EXTEND # MOVE DP COMMAND TO RUPTREGS FOR TESTING.
INDEX ITEMP1
DCA 1400
DXCH RUPTREG1
CCS RUPTREG1
TCF MAJ+
TCF +2
TCF MAJ-
CCS RUPTREG2
TCF MIN+
TCF STRTGYR2
TCF MIN-
TCF STRTGYR2
## Page 139
MIN+ AD -GYROMIN # SMALL POSITIVE COMMAND. SEE IF AT LEAST
EXTEND # 16 GYRO PULSES.
BZMF STRTGYR2
MAJ+ EXTEND # DEFINITE POSITIVE OUTPUT.
DCA GYROFRAC
DAS RUPTREG1
CA ITEMP4 # SELECT POSITIVE TORQUING FOR THIS GYRO.
EXTEND
WOR 14
CAF LOW7 # LEAVE NUMBER OF POSSIBLE 8192 AUGMENTS
MASK RUPTREG2 # TO INITIAL COMMAND IN MAJOR PART OF LONG
XCH RUPTREG2 # TERM STORAGE AND TRUNCATED FRACTION
GMERGE EXTEND # IN MINOR PART. THE MAJOR PART WILL BE
MP BIT8 # COUNTED DOWN TO ZERO IN THE COURSE OF
TS ITEMP2 # PUTTING OUT THE ENTIRE COMMAND.
CA RUPTREG1
EXTEND
MP BIT9
TS RUPTREG1
CA L
EXTEND
MP BIT14
ADS ITEMP2 # INITIAL COMMAND.
EXTEND # SEE IF MORE THAN ONE PULSE TRAIN NEEDED
DCA RUPTREG1 # (MORE THAN 16383 PULSES).
AD MINUS1
CCS A
TCF LONGGYRO
-GYROMIN OCT -177 # MAY BE ADJUSTED TO SPECIFY MINIMUM CMD.
TCF +4
CAF BIT14
ADS ITEMP2
CAF ZERO
+4 INDEX ITEMP1
DXCH 1400
## Page 140
CA ITEMP2 # ENTIRE COMMAND.
LASTSEG TS GYROCMD
EXTEND
MP BIT10 # WAITLIST DT
AD THREE # TRUNCATION AND PHASE UNCERTAINTIES.
TC WAITLIST
EBANK= COMMAND
2CADR STRTGYRO
GYROEXIT CAF BIT10 # TURN ON GYRO ACTIVITY TO START TRAIN.
EXTEND
WOR 14
TCF TASKOVER
LONGGYRO INDEX ITEMP1
DXCH 1400 # INITIAL COMMAND OUT PLUS N AUGMENTS OF
CAF BIT14 # 8192. INITIAL COMMAND IS AT LEAST 8192.
AD ITEMP2
TS GYROCMD
AUG3 EXTEND # GET WAITLIST DT TO TIME WHEN TRAIN IS
MP BIT10 # ALMOST OUT.
AD NEG3
TC WAITLIST
EBANK= COMMAND
2CADR 8192AUG
TCF GYROEXIT
8192AUG TC CAGETEST
CA LGYRO # ADD 8192 PULSES TO GYROCMD
TS EBANK
MASK LOW8
TS ITEMP1
INDEX ITEMP1 # SEE IF THIS IS THE LAST AUG.
CCS 1400
TCF AUG2 # MORE TO COME.
CAF BIT14
ADS GYROCMD
TCF LASTSEG +1
AUG2 INDEX ITEMP1
TS 1400
CAF BIT14
ADS GYROCMD
TCF AUG3 # COMPUTE DT.
## Page 141
MIN- AD -GYROMIN # POSSIBLE NEGATIVE OUTPUT.
EXTEND
BZMF STRTGYR2
MAJ- EXTEND # DEFINITE NEGATIVE OUTPUT.
DCS GYROFRAC
DAS RUPTREG1
CA ITEMP4 # SELECT NEGATIVE TORQUING FOR THIS GYRO.
AD BIT9
EXTEND
WOR 14
CS RUPTREG1 # SET UP RUPTREGS TO FALL INTO GMERGE.
TS RUPTREG1 # ALL NUMBERS PUT INTO GYROCMD ARE
CS RUPTREG2 # POSITIVE - BIT9 OF CHAN 14 DETERMINES
MASK LOW7 # THE SIGN OF THE COMMAND.
COM
XCH RUPTREG2
COM
TCF GMERGE
GDESELCT OCT 1700 # TURN OFF SELECT AND ACTIVITY BITS.
GYROFRAC 2DEC .215 B-21
## Page 142
# IMU MODE SWITCHING ROUTINES COME HERE WHEN ACTION COMPLETE.
ENDIMU EXTEND # MODE IS BAD IF CAGE HAS OCCURED OR IF
READ 11 # ISS WARNING IS ON.
MASK BIT1
CCS A
TCF IMUBAD
IMUGOOD TCF GOODEND # WITH C(A) = 0.
IMUBAD CAF ZERO
TCF BADEND
CAGETEST CAF BIT6 # SUBROUTINE TO TERMINATE IMU MODE
MASK IMODES30 # SWITCH IF IMU HAS BEEN CAGED.
CCS A
TCF IMUBAD # DIRECTLY.
TC Q # WITH C(A) = +0.
CAGETSTQ CS IMODES30 # SKIP IF IMU NOT BEING CAGED.
MASK BIT6
CCS A
INCR Q
TC Q
CAGETSTJ CS IMODES30 # IF DURING MODE SWITCH INITIALIZATION
MASK BIT6 # IT IS FOUND THAT THE IMU IS BEING CAGED,
CCS A # SET IMUCADR TO -0 TO INDICATE OPERATION
TC Q # COMPLETE BUT FAILED. RETURN IMMEDIATELY
CS ZERO # TO SWRETURN.
TS IMUCADR
TCF MODEEXIT
## Page 143
# GENERALIZED MODE SWITCHING TERMINATION. ENTER AT GOODEND FOR SUCCESSFUL COMPLETION OF AN I/O OPERATION
# OR AT BADEND FOR AN UNSUCCESSFUL ONE. C(A) OR ARRIVAL =0 FOR IMU, 1 FOR AOT, 2 FOR RADARS, & 3 FOR ATT MANU.
BADEND TS RUPTREG2 # DEVICE INDEX.
CS ZERO # FOR FAILURE.
TCF GOODEND +2
GOODEND TS RUPTREG2
CS ONE # FOR SUCCESS.
TS RUPTREG3
INDEX RUPTREG2 # SEE IF USING PROGRAM ASLEEP.
CCS MODECADR
TCF +2 # YES - WAKE IT UP.
TCF ENDMODE # IF 0, PROGRAM NOT IN YET.
CAF ZERO # WAKE SLEEPING PROGRAM.
INDEX RUPTREG2
XCH MODECADR
TC JOBWAKE
CS RUPTREG3 # ADVANCE LOC IF SUCCESSFUL.
INDEX LOCCTR
ADS LOC
TCF TASKOVER
ENDMODE CA RUPTREG3 # -0 INDICATES OPERATION COMPLETE BUT
INDEX RUPTREG2 # UNSUCCESSFUL - -1 INDICATES COMPLETE AND
TS MODECADR # SUCCESSFUL.
TCF TASKOVER
## Page 144
# GENERAL STALLING ROUTINE. USING PROGRAMS COME HERE TO WAIT FOR I/O COMPLETION.
ATTSTALL CAF THREE # ATTITUDE MANEUVER STALL
TCF STALL
RADSTALL CAF TWO # RR AND LR STALL.
TCF STALL
AOTSTALL CAF ONE # AOT.
TC STALL
OPTSTALL EQUALS AOTSTALL
IMUSTALL CAF ZERO # IMU.
STALL INHINT
TS RUPTREG2 # SAVE DEVICE INDEX.
INDEX A # SEE IF OPERATION COMPLETE.
CCS MODECADR
TCF MODABORT # ALLOWABLE STATES ARE +0, -1, AND -0.
TCF MODESLP # OPERATION INCOMPLETE.
TCF MODEGOOD # COMPLETE AND GOOD IF = -1.
MG2 INDEX RUPTREG2 # COMPLETE AND FAILED IF -0. RESET TO +0.
TS MODECADR # RETURN TO CALLER.
TCF MODEEXIT
MODEGOOD CCS A # MAKE SURE INITIAL STATE -1.
TCF MODABORT
INCR BUF2 # IF SO, INCREMENT RETURN ADDRESS AND
TCF MG2 # RETURN IMMEDIATELY, SETTING CADR = +0.
MODESLP TC MAKECADR # CALL FROM SWITCHABLE FIXED ONLY.
INDEX RUPTREG2
TS MODECADR
TCF JOBSLEEP
MODABORT TC ABORT # TWO PROGRAMS USING SAME DEVICE.
OCT 1210
## Page 145
# CONSTANTS FOR MODE SWITCHING ROUTINES
BITS3&4 OCT 14
BITS4&6 OCT 00050
BITS4-6 OCT 00070
IMUSEFLG EQUALS BIT8 # INTERPRETER SWITCH 7.
13,14,15 OCT 70000
-COMMAX DEC -191
-COMMAX- DEC -192
600MS DEC 60
3SECSM EQUALS 3SECS
90SEC DEC 9000
