swh:1:snp:a72e953ecd624a7df6e6196bbdd05851996c5e40
Tip revision: 6aaedecc447e3d8226d5027fb13d0c3cbfbfea2a authored by Kristoffer Carlsson on 23 April 2021, 05:59:49 UTC
Set VERSION to 1.6.1 (#40507)
Set VERSION to 1.6.1 (#40507)
Tip revision: 6aaedec
math.jl
# This file is a part of Julia. License is MIT: https://julialang.org/license
module Math
export sin, cos, sincos, tan, sinh, cosh, tanh, asin, acos, atan,
asinh, acosh, atanh, sec, csc, cot, asec, acsc, acot,
sech, csch, coth, asech, acsch, acoth,
sinpi, cospi, sincospi, sinc, cosc,
cosd, cotd, cscd, secd, sind, tand, sincosd,
acosd, acotd, acscd, asecd, asind, atand,
rad2deg, deg2rad,
log, log2, log10, log1p, exponent, exp, exp2, exp10, expm1,
cbrt, sqrt, significand,
hypot, max, min, minmax, ldexp, frexp,
clamp, clamp!, modf, ^, mod2pi, rem2pi,
@evalpoly, evalpoly
import .Base: log, exp, sin, cos, tan, sinh, cosh, tanh, asin,
acos, atan, asinh, acosh, atanh, sqrt, log2, log10,
max, min, minmax, ^, exp2, muladd, rem,
exp10, expm1, log1p
using .Base: sign_mask, exponent_mask, exponent_one,
exponent_half, uinttype, significand_mask,
significand_bits, exponent_bits, exponent_bias,
exponent_max, exponent_raw_max
using Core.Intrinsics: sqrt_llvm
using .Base: IEEEFloat
@noinline function throw_complex_domainerror(f::Symbol, x)
throw(DomainError(x, string("$f will only return a complex result if called with a ",
"complex argument. Try $f(Complex(x)).")))
end
@noinline function throw_exp_domainerror(x)
throw(DomainError(x, string("Exponentiation yielding a complex result requires a ",
"complex argument.\nReplace x^y with (x+0im)^y, ",
"Complex(x)^y, or similar.")))
end
# non-type specific math functions
"""
clamp(x, lo, hi)
Return `x` if `lo <= x <= hi`. If `x > hi`, return `hi`. If `x < lo`, return `lo`. Arguments
are promoted to a common type.
# Examples
```jldoctest
julia> clamp.([pi, 1.0, big(10.)], 2., 9.)
3-element Vector{BigFloat}:
3.141592653589793238462643383279502884197169399375105820974944592307816406286198
2.0
9.0
julia> clamp.([11,8,5],10,6) # an example where lo > hi
3-element Vector{Int64}:
6
6
10
```
"""
clamp(x::X, lo::L, hi::H) where {X,L,H} =
ifelse(x > hi, convert(promote_type(X,L,H), hi),
ifelse(x < lo,
convert(promote_type(X,L,H), lo),
convert(promote_type(X,L,H), x)))
"""
clamp(x, T)::T
Clamp `x` between `typemin(T)` and `typemax(T)` and convert the result to type `T`.
# Examples
```jldoctest
julia> clamp(200, Int8)
127
julia> clamp(-200, Int8)
-128
```
"""
clamp(x, ::Type{T}) where {T<:Integer} = clamp(x, typemin(T), typemax(T)) % T
"""
clamp!(array::AbstractArray, lo, hi)
Restrict values in `array` to the specified range, in-place.
See also [`clamp`](@ref).
"""
function clamp!(x::AbstractArray, lo, hi)
@inbounds for i in eachindex(x)
x[i] = clamp(x[i], lo, hi)
end
x
end
"""
clamp(x::Integer, r::AbstractUnitRange)
Clamp `x` to lie within range `r`.
!!! compat "Julia 1.6"
This method requires at least Julia 1.6.
"""
clamp(x::Integer, r::AbstractUnitRange{<:Integer}) = clamp(x, first(r), last(r))
"""
evalpoly(x, p)
Evaluate the polynomial ``\\sum_k x^{k-1} p[k]`` for the coefficients `p[1]`, `p[2]`, ...;
that is, the coefficients are given in ascending order by power of `x`.
Loops are unrolled at compile time if the number of coefficients is statically known, i.e.
when `p` is a `Tuple`.
This function generates efficient code using Horner's method if `x` is real, or using
a Goertzel-like [^DK62] algorithm if `x` is complex.
[^DK62]: Donald Knuth, Art of Computer Programming, Volume 2: Seminumerical Algorithms, Sec. 4.6.4.
!!! compat "Julia 1.4"
This function requires Julia 1.4 or later.
# Example
```jldoctest
julia> evalpoly(2, (1, 2, 3))
17
```
"""
function evalpoly(x, p::Tuple)
if @generated
N = length(p.parameters::Core.SimpleVector)
ex = :(p[end])
for i in N-1:-1:1
ex = :(muladd(x, $ex, p[$i]))
end
ex
else
_evalpoly(x, p)
end
end
evalpoly(x, p::AbstractVector) = _evalpoly(x, p)
function _evalpoly(x, p)
N = length(p)
ex = p[end]
for i in N-1:-1:1
ex = muladd(x, ex, p[i])
end
ex
end
function evalpoly(z::Complex, p::Tuple)
if @generated
N = length(p.parameters)
a = :(p[end])
b = :(p[end-1])
as = []
for i in N-2:-1:1
ai = Symbol("a", i)
push!(as, :($ai = $a))
a = :(muladd(r, $ai, $b))
b = :(muladd(-s, $ai, p[$i]))
end
ai = :a0
push!(as, :($ai = $a))
C = Expr(:block,
:(x = real(z)),
:(y = imag(z)),
:(r = x + x),
:(s = muladd(x, x, y*y)),
as...,
:(muladd($ai, z, $b)))
else
_evalpoly(z, p)
end
end
evalpoly(z::Complex, p::Tuple{<:Any}) = p[1]
evalpoly(z::Complex, p::AbstractVector) = _evalpoly(z, p)
function _evalpoly(z::Complex, p)
length(p) == 1 && return p[1]
N = length(p)
a = p[end]
b = p[end-1]
x = real(z)
y = imag(z)
r = 2x
s = muladd(x, x, y*y)
for i in N-2:-1:1
ai = a
a = muladd(r, ai, b)
b = muladd(-s, ai, p[i])
end
ai = a
muladd(ai, z, b)
end
"""
@horner(x, p...)
Evaluate `p[1] + x * (p[2] + x * (....))`, i.e. a polynomial via Horner's rule.
"""
macro horner(x, p...)
xesc, pesc = esc(x), esc.(p)
:(invoke(evalpoly, Tuple{Any, Tuple}, $xesc, ($(pesc...),)))
end
# Evaluate p[1] + z*p[2] + z^2*p[3] + ... + z^(n-1)*p[n]. This uses
# Horner's method if z is real, but for complex z it uses a more
# efficient algorithm described in Knuth, TAOCP vol. 2, section 4.6.4,
# equation (3).
"""
@evalpoly(z, c...)
Evaluate the polynomial ``\\sum_k z^{k-1} c[k]`` for the coefficients `c[1]`, `c[2]`, ...;
that is, the coefficients are given in ascending order by power of `z`. This macro expands
to efficient inline code that uses either Horner's method or, for complex `z`, a more
efficient Goertzel-like algorithm.
# Examples
```jldoctest
julia> @evalpoly(3, 1, 0, 1)
10
julia> @evalpoly(2, 1, 0, 1)
5
julia> @evalpoly(2, 1, 1, 1)
7
```
"""
macro evalpoly(z, p...)
zesc, pesc = esc(z), esc.(p)
:(evalpoly($zesc, ($(pesc...),)))
end
"""
rad2deg(x)
Convert `x` from radians to degrees.
# Examples
```jldoctest
julia> rad2deg(pi)
180.0
```
"""
rad2deg(z::AbstractFloat) = z * (180 / oftype(z, pi))
"""
deg2rad(x)
Convert `x` from degrees to radians.
# Examples
```jldoctest
julia> deg2rad(90)
1.5707963267948966
```
"""
deg2rad(z::AbstractFloat) = z * (oftype(z, pi) / 180)
rad2deg(z::Real) = rad2deg(float(z))
deg2rad(z::Real) = deg2rad(float(z))
rad2deg(z::Number) = (z/pi)*180
deg2rad(z::Number) = (z*pi)/180
log(b::T, x::T) where {T<:Number} = log(x)/log(b)
"""
log(b,x)
Compute the base `b` logarithm of `x`. Throws [`DomainError`](@ref) for negative
[`Real`](@ref) arguments.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> log(4,8)
1.5
julia> log(4,2)
0.5
julia> log(-2, 3)
ERROR: DomainError with -2.0:
log will only return a complex result if called with a complex argument. Try log(Complex(x)).
Stacktrace:
[1] throw_complex_domainerror(::Symbol, ::Float64) at ./math.jl:31
[...]
julia> log(2, -3)
ERROR: DomainError with -3.0:
log will only return a complex result if called with a complex argument. Try log(Complex(x)).
Stacktrace:
[1] throw_complex_domainerror(::Symbol, ::Float64) at ./math.jl:31
[...]
```
!!! note
If `b` is a power of 2 or 10, [`log2`](@ref) or [`log10`](@ref) should be used, as these will
typically be faster and more accurate. For example,
```jldoctest
julia> log(100,1000000)
2.9999999999999996
julia> log10(1000000)/2
3.0
```
"""
log(b::Number, x::Number) = log(promote(b,x)...)
# type specific math functions
const libm = Base.libm_name
# functions with no domain error
"""
sinh(x)
Compute hyperbolic sine of `x`.
"""
sinh(x::Number)
"""
cosh(x)
Compute hyperbolic cosine of `x`.
"""
cosh(x::Number)
"""
tanh(x)
Compute hyperbolic tangent of `x`.
"""
tanh(x::Number)
"""
atan(y)
atan(y, x)
Compute the inverse tangent of `y` or `y/x`, respectively.
For one argument, this is the angle in radians between the positive *x*-axis and the point
(1, *y*), returning a value in the interval ``[-\\pi/2, \\pi/2]``.
For two arguments, this is the angle in radians between the positive *x*-axis and the
point (*x*, *y*), returning a value in the interval ``[-\\pi, \\pi]``. This corresponds to a
standard [`atan2`](https://en.wikipedia.org/wiki/Atan2) function. Note that by convention
`atan(0.0,x)` is defined as ``\\pi`` and `atan(-0.0,x)` is defined as ``-\\pi`` when `x < 0`.
"""
atan(x::Number)
"""
asinh(x)
Compute the inverse hyperbolic sine of `x`.
"""
asinh(x::Number)
"""
expm1(x)
Accurately compute ``e^x-1``.
"""
expm1(x)
expm1(x::Float64) = ccall((:expm1,libm), Float64, (Float64,), x)
expm1(x::Float32) = ccall((:expm1f,libm), Float32, (Float32,), x)
"""
exp2(x)
Compute the base 2 exponential of `x`, in other words ``2^x``.
# Examples
```jldoctest
julia> exp2(5)
32.0
```
"""
exp2(x::AbstractFloat) = 2^x
"""
exp10(x)
Compute the base 10 exponential of `x`, in other words ``10^x``.
# Examples
```jldoctest
julia> exp10(2)
100.0
```
"""
exp10(x::AbstractFloat) = 10^x
for f in (:sin, :cos, :tan, :sinh, :cosh, :tanh, :atan, :acos, :asin, :asinh, :acosh, :atanh, :expm1, :log, :log1p)
@eval function ($f)(x::Real)
xf = float(x)
x === xf && throw(MethodError($f, (x,)))
return ($f)(xf)
end
end
# functions with special cases for integer arguments
@inline function exp2(x::Base.BitInteger)
if x > 1023
Inf64
elseif x <= -1023
# if -1073 < x <= -1023 then Result will be a subnormal number
# Hex literal with padding must be used to work on 32bit machine
reinterpret(Float64, 0x0000_0000_0000_0001 << ((x + 1074) % UInt))
else
# We will cast everything to Int64 to avoid errors in case of Int128
# If x is a Int128, and is outside the range of Int64, then it is not -1023<x<=1023
reinterpret(Float64, (exponent_bias(Float64) + (x % Int64)) << (significand_bits(Float64) % UInt))
end
end
# utility for converting NaN return to DomainError
# the branch in nan_dom_err prevents its callers from inlining, so be sure to force it
# until the heuristics can be improved
@inline nan_dom_err(out, x) = isnan(out) & !isnan(x) ? throw(DomainError(x, "NaN result for non-NaN input.")) : out
# functions that return NaN on non-NaN argument for domain error
"""
sin(x)
Compute sine of `x`, where `x` is in radians.
"""
sin(x::Number)
"""
cos(x)
Compute cosine of `x`, where `x` is in radians.
"""
cos(x::Number)
"""
tan(x)
Compute tangent of `x`, where `x` is in radians.
"""
tan(x::Number)
"""
asin(x)
Compute the inverse sine of `x`, where the output is in radians.
"""
asin(x::Number)
"""
acos(x)
Compute the inverse cosine of `x`, where the output is in radians
"""
acos(x::Number)
"""
acosh(x)
Compute the inverse hyperbolic cosine of `x`.
"""
acosh(x::Number)
"""
atanh(x)
Compute the inverse hyperbolic tangent of `x`.
"""
atanh(x::Number)
"""
log(x)
Compute the natural logarithm of `x`. Throws [`DomainError`](@ref) for negative
[`Real`](@ref) arguments. Use complex negative arguments to obtain complex results.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> log(2)
0.6931471805599453
julia> log(-3)
ERROR: DomainError with -3.0:
log will only return a complex result if called with a complex argument. Try log(Complex(x)).
Stacktrace:
[1] throw_complex_domainerror(::Symbol, ::Float64) at ./math.jl:31
[...]
```
"""
log(x::Number)
"""
log2(x)
Compute the logarithm of `x` to base 2. Throws [`DomainError`](@ref) for negative
[`Real`](@ref) arguments.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> log2(4)
2.0
julia> log2(10)
3.321928094887362
julia> log2(-2)
ERROR: DomainError with -2.0:
NaN result for non-NaN input.
Stacktrace:
[1] nan_dom_err at ./math.jl:325 [inlined]
[...]
```
"""
log2(x)
"""
log10(x)
Compute the logarithm of `x` to base 10.
Throws [`DomainError`](@ref) for negative [`Real`](@ref) arguments.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> log10(100)
2.0
julia> log10(2)
0.3010299956639812
julia> log10(-2)
ERROR: DomainError with -2.0:
NaN result for non-NaN input.
Stacktrace:
[1] nan_dom_err at ./math.jl:325 [inlined]
[...]
```
"""
log10(x)
"""
log1p(x)
Accurate natural logarithm of `1+x`. Throws [`DomainError`](@ref) for [`Real`](@ref)
arguments less than -1.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> log1p(-0.5)
-0.6931471805599453
julia> log1p(0)
0.0
julia> log1p(-2)
ERROR: DomainError with -2.0:
log1p will only return a complex result if called with a complex argument. Try log1p(Complex(x)).
Stacktrace:
[1] throw_complex_domainerror(::Symbol, ::Float64) at ./math.jl:31
[...]
```
"""
log1p(x)
for f in (:log2, :log10)
@eval begin
@inline ($f)(x::Float64) = nan_dom_err(ccall(($(string(f)), libm), Float64, (Float64,), x), x)
@inline ($f)(x::Float32) = nan_dom_err(ccall(($(string(f, "f")), libm), Float32, (Float32,), x), x)
@inline ($f)(x::Real) = ($f)(float(x))
end
end
@inline function sqrt(x::Union{Float32,Float64})
x < zero(x) && throw_complex_domainerror(:sqrt, x)
sqrt_llvm(x)
end
"""
sqrt(x)
Return ``\\sqrt{x}``. Throws [`DomainError`](@ref) for negative [`Real`](@ref) arguments.
Use complex negative arguments instead. The prefix operator `√` is equivalent to `sqrt`.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> sqrt(big(81))
9.0
julia> sqrt(big(-81))
ERROR: DomainError with -81.0:
NaN result for non-NaN input.
Stacktrace:
[1] sqrt(::BigFloat) at ./mpfr.jl:501
[...]
julia> sqrt(big(complex(-81)))
0.0 + 9.0im
```
"""
sqrt(x::Real) = sqrt(float(x))
"""
hypot(x, y)
Compute the hypotenuse ``\\sqrt{|x|^2+|y|^2}`` avoiding overflow and underflow.
This code is an implementation of the algorithm described in:
An Improved Algorithm for `hypot(a,b)`
by Carlos F. Borges
The article is available online at ArXiv at the link
https://arxiv.org/abs/1904.09481
hypot(x...)
Compute the hypotenuse ``\\sqrt{\\sum |x_i|^2}`` avoiding overflow and underflow.
# Examples
```jldoctest; filter = r"Stacktrace:(\\n \\[[0-9]+\\].*)*"
julia> a = Int64(10)^10;
julia> hypot(a, a)
1.4142135623730951e10
julia> √(a^2 + a^2) # a^2 overflows
ERROR: DomainError with -2.914184810805068e18:
sqrt will only return a complex result if called with a complex argument. Try sqrt(Complex(x)).
Stacktrace:
[...]
julia> hypot(3, 4im)
5.0
julia> hypot(-5.7)
5.7
julia> hypot(3, 4im, 12.0)
13.0
```
"""
hypot(x::Number) = abs(float(x))
hypot(x::Number, y::Number, xs::Number...) = _hypot(float.(promote(x, y, xs...))...)
function _hypot(x, y)
# preserves unit
axu = abs(x)
ayu = abs(y)
# unitless
ax = axu / oneunit(axu)
ay = ayu / oneunit(ayu)
# Return Inf if either or both inputs is Inf (Compliance with IEEE754)
if isinf(ax) || isinf(ay)
return oftype(axu, Inf)
end
# Order the operands
if ay > ax
axu, ayu = ayu, axu
ax, ay = ay, ax
end
# Widely varying operands
if ay <= ax*sqrt(eps(typeof(ax))/2) #Note: This also gets ay == 0
return axu
end
# Operands do not vary widely
scale = eps(typeof(ax))*sqrt(floatmin(ax)) #Rescaling constant
if ax > sqrt(floatmax(ax)/2)
ax = ax*scale
ay = ay*scale
scale = inv(scale)
elseif ay < sqrt(floatmin(ax))
ax = ax/scale
ay = ay/scale
else
scale = oneunit(scale)
end
h = sqrt(muladd(ax, ax, ay*ay))
# This branch is correctly rounded but requires a native hardware fma.
if Base.Math.FMA_NATIVE
hsquared = h*h
axsquared = ax*ax
h -= (fma(-ay, ay, hsquared-axsquared) + fma(h, h,-hsquared) - fma(ax, ax, -axsquared))/(2*h)
# This branch is within one ulp of correctly rounded.
else
if h <= 2*ay
delta = h-ay
h -= muladd(delta, delta-2*(ax-ay), ax*(2*delta - ax))/(2*h)
else
delta = h-ax
h -= muladd(delta, delta, muladd(ay, (4*delta - ay), 2*delta*(ax - 2*ay)))/(2*h)
end
end
return h*scale*oneunit(axu)
end
_hypot(x::Float16, y::Float16) = Float16(_hypot(Float32(x), Float32(y)))
_hypot(x::ComplexF16, y::ComplexF16) = Float16(_hypot(ComplexF32(x), ComplexF32(y)))
function _hypot(x...)
maxabs = maximum(abs, x)
if isnan(maxabs) && any(isinf, x)
return oftype(maxabs, Inf)
elseif (iszero(maxabs) || isinf(maxabs))
return maxabs
else
return maxabs * sqrt(sum(y -> abs2(y / maxabs), x))
end
end
atan(y::Real, x::Real) = atan(promote(float(y),float(x))...)
atan(y::T, x::T) where {T<:AbstractFloat} = Base.no_op_err("atan", T)
max(x::T, y::T) where {T<:AbstractFloat} = ifelse((y > x) | (signbit(y) < signbit(x)),
ifelse(isnan(x), x, y), ifelse(isnan(y), y, x))
min(x::T, y::T) where {T<:AbstractFloat} = ifelse((y < x) | (signbit(y) > signbit(x)),
ifelse(isnan(x), x, y), ifelse(isnan(y), y, x))
minmax(x::T, y::T) where {T<:AbstractFloat} =
ifelse(isnan(x) | isnan(y), ifelse(isnan(x), (x,x), (y,y)),
ifelse((y > x) | (signbit(x) > signbit(y)), (x,y), (y,x)))
"""
ldexp(x, n)
Compute ``x \\times 2^n``.
# Examples
```jldoctest
julia> ldexp(5., 2)
20.0
```
"""
function ldexp(x::T, e::Integer) where T<:IEEEFloat
xu = reinterpret(Unsigned, x)
xs = xu & ~sign_mask(T)
xs >= exponent_mask(T) && return x # NaN or Inf
k = Int(xs >> significand_bits(T))
if k == 0 # x is subnormal
xs == 0 && return x # +-0
m = leading_zeros(xs) - exponent_bits(T)
ys = xs << unsigned(m)
xu = ys | (xu & sign_mask(T))
k = 1 - m
# underflow, otherwise may have integer underflow in the following n + k
e < -50000 && return flipsign(T(0.0), x)
end
# For cases where e of an Integer larger than Int make sure we properly
# overflow/underflow; this is optimized away otherwise.
if e > typemax(Int)
return flipsign(T(Inf), x)
elseif e < typemin(Int)
return flipsign(T(0.0), x)
end
n = e % Int
k += n
# overflow, if k is larger than maximum possible exponent
if k >= exponent_raw_max(T)
return flipsign(T(Inf), x)
end
if k > 0 # normal case
xu = (xu & ~exponent_mask(T)) | (rem(k, uinttype(T)) << significand_bits(T))
return reinterpret(T, xu)
else # subnormal case
if k <= -significand_bits(T) # underflow
# overflow, for the case of integer overflow in n + k
e > 50000 && return flipsign(T(Inf), x)
return flipsign(T(0.0), x)
end
k += significand_bits(T)
z = T(2.0)^-significand_bits(T)
xu = (xu & ~exponent_mask(T)) | (rem(k, uinttype(T)) << significand_bits(T))
return z*reinterpret(T, xu)
end
end
ldexp(x::Float16, q::Integer) = Float16(ldexp(Float32(x), q))
"""
exponent(x::AbstractFloat) -> Int
Get the exponent of a normalized floating-point number.
Returns the largest integer `y` such that `2^y ≤ abs(x)`.
"""
function exponent(x::T) where T<:IEEEFloat
@noinline throw1(x) = throw(DomainError(x, "Cannot be NaN or Inf."))
@noinline throw2(x) = throw(DomainError(x, "Cannot be subnormal converted to 0."))
xs = reinterpret(Unsigned, x) & ~sign_mask(T)
xs >= exponent_mask(T) && throw1(x)
k = Int(xs >> significand_bits(T))
if k == 0 # x is subnormal
xs == 0 && throw2(x)
m = leading_zeros(xs) - exponent_bits(T)
k = 1 - m
end
return k - exponent_bias(T)
end
"""
significand(x)
Extract the `significand(s)` (a.k.a. mantissa), in binary representation, of a
floating-point number. If `x` is a non-zero finite number, then the result will be
a number of the same type on the interval ``[1,2)``. Otherwise `x` is returned.
# Examples
```jldoctest
julia> significand(15.2)/15.2
0.125
julia> significand(15.2)*8
15.2
```
"""
function significand(x::T) where T<:IEEEFloat
xu = reinterpret(Unsigned, x)
xs = xu & ~sign_mask(T)
xs >= exponent_mask(T) && return x # NaN or Inf
if xs <= (~exponent_mask(T) & ~sign_mask(T)) # x is subnormal
xs == 0 && return x # +-0
m = unsigned(leading_zeros(xs) - exponent_bits(T))
xs <<= m
xu = xs | (xu & sign_mask(T))
end
xu = (xu & ~exponent_mask(T)) | exponent_one(T)
return reinterpret(T, xu)
end
"""
frexp(val)
Return `(x,exp)` such that `x` has a magnitude in the interval ``[1/2, 1)`` or 0,
and `val` is equal to ``x \\times 2^{exp}``.
"""
function frexp(x::T) where T<:IEEEFloat
xu = reinterpret(Unsigned, x)
xs = xu & ~sign_mask(T)
xs >= exponent_mask(T) && return x, 0 # NaN or Inf
k = Int(xs >> significand_bits(T))
if k == 0 # x is subnormal
xs == 0 && return x, 0 # +-0
m = leading_zeros(xs) - exponent_bits(T)
xs <<= unsigned(m)
xu = xs | (xu & sign_mask(T))
k = 1 - m
end
k -= (exponent_bias(T) - 1)
xu = (xu & ~exponent_mask(T)) | exponent_half(T)
return reinterpret(T, xu), k
end
rem(x::Float64, y::Float64, ::RoundingMode{:Nearest}) =
ccall((:remainder, libm),Float64,(Float64,Float64),x,y)
rem(x::Float32, y::Float32, ::RoundingMode{:Nearest}) =
ccall((:remainderf, libm),Float32,(Float32,Float32),x,y)
rem(x::Float16, y::Float16, r::RoundingMode{:Nearest}) = Float16(rem(Float32(x), Float32(y), r))
"""
modf(x)
Return a tuple `(fpart, ipart)` of the fractional and integral parts of a number. Both parts
have the same sign as the argument.
# Examples
```jldoctest
julia> modf(3.5)
(0.5, 3.0)
julia> modf(-3.5)
(-0.5, -3.0)
```
"""
modf(x) = isinf(x) ? (flipsign(zero(x), x), x) : (rem(x, one(x)), trunc(x))
function modf(x::Float32)
temp = Ref{Float32}()
f = ccall((:modff, libm), Float32, (Float32, Ptr{Float32}), x, temp)
f, temp[]
end
function modf(x::Float64)
temp = Ref{Float64}()
f = ccall((:modf, libm), Float64, (Float64, Ptr{Float64}), x, temp)
f, temp[]
end
@inline function ^(x::Float64, y::Float64)
z = ccall("llvm.pow.f64", llvmcall, Float64, (Float64, Float64), x, y)
if isnan(z) & !isnan(x+y)
throw_exp_domainerror(x)
end
z
end
@inline function ^(x::Float32, y::Float32)
z = ccall("llvm.pow.f32", llvmcall, Float32, (Float32, Float32), x, y)
if isnan(z) & !isnan(x+y)
throw_exp_domainerror(x)
end
z
end
@inline ^(x::Float16, y::Float16) = Float16(Float32(x)^Float32(y)) # TODO: optimize
@inline function ^(x::Float64, y::Integer)
y == -1 && return inv(x)
y == 0 && return one(x)
y == 1 && return x
y == 2 && return x*x
y == 3 && return x*x*x
ccall("llvm.pow.f64", llvmcall, Float64, (Float64, Float64), x, Float64(y))
end
@inline function ^(x::Float32, y::Integer)
y == -1 && return inv(x)
y == 0 && return one(x)
y == 1 && return x
y == 2 && return x*x
y == 3 && return x*x*x
ccall("llvm.pow.f32", llvmcall, Float32, (Float32, Float32), x, Float32(y))
end
@inline ^(x::Float16, y::Integer) = Float16(Float32(x) ^ y)
@inline literal_pow(::typeof(^), x::Float16, ::Val{p}) where {p} = Float16(literal_pow(^,Float32(x),Val(p)))
## rem2pi-related calculations ##
function add22condh(xh::Float64, xl::Float64, yh::Float64, yl::Float64)
# This algorithm, due to Dekker, computes the sum of two
# double-double numbers and returns the high double. References:
# [1] http://www.digizeitschriften.de/en/dms/img/?PID=GDZPPN001170007
# [2] https://doi.org/10.1007/BF01397083
r = xh+yh
s = (abs(xh) > abs(yh)) ? (xh-r+yh+yl+xl) : (yh-r+xh+xl+yl)
zh = r+s
return zh
end
# multiples of pi/2, as double-double (ie with "tail")
const pi1o2_h = 1.5707963267948966 # convert(Float64, pi * BigFloat(1/2))
const pi1o2_l = 6.123233995736766e-17 # convert(Float64, pi * BigFloat(1/2) - pi1o2_h)
const pi2o2_h = 3.141592653589793 # convert(Float64, pi * BigFloat(1))
const pi2o2_l = 1.2246467991473532e-16 # convert(Float64, pi * BigFloat(1) - pi2o2_h)
const pi3o2_h = 4.71238898038469 # convert(Float64, pi * BigFloat(3/2))
const pi3o2_l = 1.8369701987210297e-16 # convert(Float64, pi * BigFloat(3/2) - pi3o2_h)
const pi4o2_h = 6.283185307179586 # convert(Float64, pi * BigFloat(2))
const pi4o2_l = 2.4492935982947064e-16 # convert(Float64, pi * BigFloat(2) - pi4o2_h)
"""
rem2pi(x, r::RoundingMode)
Compute the remainder of `x` after integer division by `2π`, with the quotient rounded
according to the rounding mode `r`. In other words, the quantity
x - 2π*round(x/(2π),r)
without any intermediate rounding. This internally uses a high precision approximation of
2π, and so will give a more accurate result than `rem(x,2π,r)`
- if `r == RoundNearest`, then the result is in the interval ``[-π, π]``. This will generally
be the most accurate result. See also [`RoundNearest`](@ref).
- if `r == RoundToZero`, then the result is in the interval ``[0, 2π]`` if `x` is positive,.
or ``[-2π, 0]`` otherwise. See also [`RoundToZero`](@ref).
- if `r == RoundDown`, then the result is in the interval ``[0, 2π]``.
See also [`RoundDown`](@ref).
- if `r == RoundUp`, then the result is in the interval ``[-2π, 0]``.
See also [`RoundUp`](@ref).
# Examples
```jldoctest
julia> rem2pi(7pi/4, RoundNearest)
-0.7853981633974485
julia> rem2pi(7pi/4, RoundDown)
5.497787143782138
```
"""
function rem2pi end
function rem2pi(x::Float64, ::RoundingMode{:Nearest})
abs(x) < pi && return x
n,y = rem_pio2_kernel(x)
if iseven(n)
if n & 2 == 2 # n % 4 == 2: add/subtract pi
if y.hi <= 0
return add22condh(y.hi,y.lo,pi2o2_h,pi2o2_l)
else
return add22condh(y.hi,y.lo,-pi2o2_h,-pi2o2_l)
end
else # n % 4 == 0: add 0
return y.hi+y.lo
end
else
if n & 2 == 2 # n % 4 == 3: subtract pi/2
return add22condh(y.hi,y.lo,-pi1o2_h,-pi1o2_l)
else # n % 4 == 1: add pi/2
return add22condh(y.hi,y.lo,pi1o2_h,pi1o2_l)
end
end
end
function rem2pi(x::Float64, ::RoundingMode{:ToZero})
ax = abs(x)
ax <= 2*Float64(pi,RoundDown) && return x
n,y = rem_pio2_kernel(ax)
if iseven(n)
if n & 2 == 2 # n % 4 == 2: add pi
z = add22condh(y.hi,y.lo,pi2o2_h,pi2o2_l)
else # n % 4 == 0: add 0 or 2pi
if y.hi > 0
z = y.hi+y.lo
else # negative: add 2pi
z = add22condh(y.hi,y.lo,pi4o2_h,pi4o2_l)
end
end
else
if n & 2 == 2 # n % 4 == 3: add 3pi/2
z = add22condh(y.hi,y.lo,pi3o2_h,pi3o2_l)
else # n % 4 == 1: add pi/2
z = add22condh(y.hi,y.lo,pi1o2_h,pi1o2_l)
end
end
copysign(z,x)
end
function rem2pi(x::Float64, ::RoundingMode{:Down})
if x < pi4o2_h
if x >= 0
return x
elseif x > -pi4o2_h
return add22condh(x,0.0,pi4o2_h,pi4o2_l)
end
end
n,y = rem_pio2_kernel(x)
if iseven(n)
if n & 2 == 2 # n % 4 == 2: add pi
return add22condh(y.hi,y.lo,pi2o2_h,pi2o2_l)
else # n % 4 == 0: add 0 or 2pi
if y.hi > 0
return y.hi+y.lo
else # negative: add 2pi
return add22condh(y.hi,y.lo,pi4o2_h,pi4o2_l)
end
end
else
if n & 2 == 2 # n % 4 == 3: add 3pi/2
return add22condh(y.hi,y.lo,pi3o2_h,pi3o2_l)
else # n % 4 == 1: add pi/2
return add22condh(y.hi,y.lo,pi1o2_h,pi1o2_l)
end
end
end
function rem2pi(x::Float64, ::RoundingMode{:Up})
if x > -pi4o2_h
if x <= 0
return x
elseif x < pi4o2_h
return add22condh(x,0.0,-pi4o2_h,-pi4o2_l)
end
end
n,y = rem_pio2_kernel(x)
if iseven(n)
if n & 2 == 2 # n % 4 == 2: sub pi
return add22condh(y.hi,y.lo,-pi2o2_h,-pi2o2_l)
else # n % 4 == 0: sub 0 or 2pi
if y.hi < 0
return y.hi+y.lo
else # positive: sub 2pi
return add22condh(y.hi,y.lo,-pi4o2_h,-pi4o2_l)
end
end
else
if n & 2 == 2 # n % 4 == 3: sub pi/2
return add22condh(y.hi,y.lo,-pi1o2_h,-pi1o2_l)
else # n % 4 == 1: sub 3pi/2
return add22condh(y.hi,y.lo,-pi3o2_h,-pi3o2_l)
end
end
end
rem2pi(x::Float32, r::RoundingMode) = Float32(rem2pi(Float64(x), r))
rem2pi(x::Float16, r::RoundingMode) = Float16(rem2pi(Float64(x), r))
rem2pi(x::Int32, r::RoundingMode) = rem2pi(Float64(x), r)
function rem2pi(x::Int64, r::RoundingMode)
fx = Float64(x)
fx == x || throw(ArgumentError("Int64 argument to rem2pi is too large: $x"))
rem2pi(fx, r)
end
"""
mod2pi(x)
Modulus after division by `2π`, returning in the range ``[0,2π)``.
This function computes a floating point representation of the modulus after division by
numerically exact `2π`, and is therefore not exactly the same as `mod(x,2π)`, which would
compute the modulus of `x` relative to division by the floating-point number `2π`.
!!! note
Depending on the format of the input value, the closest representable value to 2π may
be less than 2π. For example, the expression `mod2pi(2π)` will not return `0`, because
the intermediate value of `2*π` is a `Float64` and `2*Float64(π) < 2*big(π)`. See
[`rem2pi`](@ref) for more refined control of this behavior.
# Examples
```jldoctest
julia> mod2pi(9*pi/4)
0.7853981633974481
```
"""
mod2pi(x) = rem2pi(x,RoundDown)
# generic fallback; for number types, promotion.jl does promotion
"""
muladd(x, y, z)
Combined multiply-add: computes `x*y+z`, but allowing the add and multiply to be merged
with each other or with surrounding operations for performance.
For example, this may be implemented as an [`fma`](@ref) if the hardware supports it
efficiently.
The result can be different on different machines and can also be different on the same machine
due to constant propagation or other optimizations.
See [`fma`](@ref).
# Examples
```jldoctest
julia> muladd(3, 2, 1)
7
julia> 3 * 2 + 1
7
```
"""
muladd(x,y,z) = x*y+z
# Float16 definitions
for func in (:sin,:cos,:tan,:asin,:acos,:atan,:sinh,:cosh,:tanh,:asinh,:acosh,
:atanh,:exp,:exp2,:exp10,:log,:log2,:log10,:sqrt,:lgamma,:log1p)
@eval begin
$func(a::Float16) = Float16($func(Float32(a)))
$func(a::ComplexF16) = ComplexF16($func(ComplexF32(a)))
end
end
atan(a::Float16,b::Float16) = Float16(atan(Float32(a),Float32(b)))
cbrt(a::Float16) = Float16(cbrt(Float32(a)))
sincos(a::Float16) = Float16.(sincos(Float32(a)))
# helper functions for Libm functionality
"""
highword(x)
Return the high word of `x` as a `UInt32`.
"""
@inline highword(x::Float64) = highword(reinterpret(UInt64, x))
@inline highword(x::UInt64) = (x >>> 32) % UInt32
@inline highword(x::Float32) = reinterpret(UInt32, x)
@inline fromhighword(::Type{Float64}, u::UInt32) = reinterpret(Float64, UInt64(u) << 32)
@inline fromhighword(::Type{Float32}, u::UInt32) = reinterpret(Float32, u)
"""
poshighword(x)
Return positive part of the high word of `x` as a `UInt32`.
"""
@inline poshighword(x::Float64) = poshighword(reinterpret(UInt64, x))
@inline poshighword(x::UInt64) = highword(x) & 0x7fffffff
@inline poshighword(x::Float32) = highword(x) & 0x7fffffff
# More special functions
include("special/cbrt.jl")
include("special/exp.jl")
include("special/ldexp_exp.jl")
include("special/hyperbolic.jl")
include("special/trig.jl")
include("special/rem_pio2.jl")
include("special/log.jl")
# `missing` definitions for functions in this module
for f in (:(acos), :(acosh), :(asin), :(asinh), :(atan), :(atanh),
:(sin), :(sinh), :(cos), :(cosh), :(tan), :(tanh),
:(exp), :(exp2), :(expm1), :(log), :(log10), :(log1p),
:(log2), :(exponent), :(sqrt))
@eval $(f)(::Missing) = missing
end
clamp(::Missing, lo, hi) = missing
end # module