swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 92d21ac74a9e3c09b0b01c764e530657e4c85c49 authored by Linus Torvalds on 11 July 2016, 03:24:59 UTC
Linux 4.7-rc7
Linux 4.7-rc7
Tip revision: 92d21ac
dra7.dtsi
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* Based on "omap4.dtsi"
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/dra.h>
#include "skeleton.dtsi"
#define MAX_SOURCES 400
/ {
#address-cells = <2>;
#size-cells = <2>;
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
i2c4 = &i2c5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
serial6 = &uart7;
serial7 = &uart8;
serial8 = &uart9;
serial9 = &uart10;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
d_can0 = &dcan1;
d_can1 = &dcan2;
spi0 = &qspi;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0 0x48211000 0x0 0x1000>,
<0x0 0x48212000 0x0 0x1000>,
<0x0 0x48214000 0x0 0x2000>,
<0x0 0x48216000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0 0x48281000 0x0 0x1000>;
interrupt-parent = <&gic>;
};
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu";
};
};
/*
* XXX: Use a flat representation of the SOC interconnect.
* The real OMAP interconnect network is quite complex.
* Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
ocp {
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0xc0000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
l4_cfg: l4@4a000000 {
compatible = "ti,dra7-l4-cfg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a000000 0x22c000>;
scm: scm@2000 {
compatible = "ti,dra7-scm-core", "simple-bus";
reg = <0x2000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2000 0x2000>;
scm_conf: scm_conf@0 {
compatible = "syscon", "simple-bus";
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator@e00 {
compatible = "ti,pbias-dra7", "ti,pbias-omap";
reg = <0xe00 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap5 {
regulator-name = "pbias_mmc_omap5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
scm_conf_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
};
dra7_pmx_core: pinmux@1400 {
compatible = "ti,dra7-padconf",
"pinctrl-single";
reg = <0x1400 0x0468>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x3fffffff>;
};
scm_conf1: scm_conf@1c04 {
compatible = "syscon";
reg = <0x1c04 0x0020>;
};
scm_conf_pcie: scm_conf@1c24 {
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
sdma_xbar: dma-router@b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0xb78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
};
edma_xbar: dma-router@c78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0xc78 0x7c>;
#dma-cells = <2>;
dma-requests = <204>;
ti,dma-safe-map = <0>;
dma-masters = <&edma>;
};
};
cm_core_aon: cm_core_aon@5000 {
compatible = "ti,dra7-cm-core-aon";
reg = <0x5000 0x2000>;
cm_core_aon_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
cm_core_aon_clockdomains: clockdomains {
};
};
cm_core: cm_core@8000 {
compatible = "ti,dra7-cm-core";
reg = <0x8000 0x3000>;
cm_core_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
cm_core_clockdomains: clockdomains {
};
};
};
l4_wkup: l4@4ae00000 {
compatible = "ti,dra7-l4-wkup", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4ae00000 0x3f000>;
counter32k: counter@4000 {
compatible = "ti,omap-counter32k";
reg = <0x4000 0x40>;
ti,hwmods = "counter_32k";
};
prm: prm@6000 {
compatible = "ti,dra7-prm";
reg = <0x6000 0x3000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
prm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
prm_clockdomains: clockdomains {
};
};
};
axi@0 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
pcie1: pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 232 0x4>, <0 233 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie1_intc 1>,
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
pcie1_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
axi@1 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
status = "disabled";
pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 355 0x4>, <0 356 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
ti,hwmods = "pcie2";
phys = <&pcie2_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2_intc 1>,
<0 0 0 2 &pcie2_intc 2>,
<0 0 0 3 &pcie2_intc 3>,
<0 0 0 4 &pcie2_intc 4>;
pcie2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
bandgap: bandgap@4a0021e0 {
reg = <0x4a0021e0 0xc
0x4a00232c 0xc
0x4a002380 0x2c
0x4a0023C0 0x3c
0x4a002564 0x8
0x4a002574 0x50>;
compatible = "ti,dra752-bandgap";
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
};
dsp1_system: dsp_system@40d00000 {
compatible = "syscon";
reg = <0x40d00000 0x100>;
};
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
};
edma: edma@43300000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
reg = <0x43300000 0x100000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_ccint", "emda3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
/*
* memcpy is disabled, can be enabled with:
* ti,edma-memcpy-channels = <20 21>;
* for example. Note that these channels need to be
* masked in the xbar as well.
*/
};
edma_tptc0: tptc@43400000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc0";
reg = <0x43400000 0x100000>;
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
edma_tptc1: tptc@43500000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc1";
reg = <0x43500000 0x100000>;
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart1: serial@4806a000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4806a000 0x100>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
dma-names = "tx", "rx";
};
uart2: serial@4806c000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4806c000 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
dma-names = "tx", "rx";
};
uart3: serial@48020000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48020000 0x100>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
dma-names = "tx", "rx";
};
uart4: serial@4806e000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4806e000 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
dma-names = "tx", "rx";
};
uart5: serial@48066000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48066000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
dma-names = "tx", "rx";
};
uart6: serial@48068000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48068000 0x100>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
dma-names = "tx", "rx";
};
uart7: serial@48420000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48420000 0x100>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
};
uart8: serial@48422000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48422000 0x100>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
};
uart9: serial@48424000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x48424000 0x100>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
};
uart10: serial@4ae2b000 {
compatible = "ti,dra742-uart", "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
};
mailbox1: mailbox@4a0f4000 {
compatible = "ti,omap4-mailbox";
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox1";
#mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
status = "disabled";
};
mailbox2: mailbox@4883a000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883a000 0x200>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox2";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox3: mailbox@4883c000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883c000 0x200>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox3";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox4: mailbox@4883e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883e000 0x200>;
interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox4";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox5: mailbox@48840000 {
compatible = "ti,omap4-mailbox";
reg = <0x48840000 0x200>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox5";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox6: mailbox@48842000 {
compatible = "ti,omap4-mailbox";
reg = <0x48842000 0x200>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox6";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox7: mailbox@48844000 {
compatible = "ti,omap4-mailbox";
reg = <0x48844000 0x200>;
interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox7";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox8: mailbox@48846000 {
compatible = "ti,omap4-mailbox";
reg = <0x48846000 0x200>;
interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox8";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox9: mailbox@4885e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4885e000 0x200>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox9";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox10: mailbox@48860000 {
compatible = "ti,omap4-mailbox";
reg = <0x48860000 0x200>;
interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox10";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox11: mailbox@48862000 {
compatible = "ti,omap4-mailbox";
reg = <0x48862000 0x200>;
interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox11";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox12: mailbox@48864000 {
compatible = "ti,omap4-mailbox";
reg = <0x48864000 0x200>;
interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox12";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox13: mailbox@48802000 {
compatible = "ti,omap4-mailbox";
reg = <0x48802000 0x200>;
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox13";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
timer2: timer@48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
timer5: timer@48820000 {
compatible = "ti,omap5430-timer";
reg = <0x48820000 0x80>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
};
timer6: timer@48822000 {
compatible = "ti,omap5430-timer";
reg = <0x48822000 0x80>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
};
timer7: timer@48824000 {
compatible = "ti,omap5430-timer";
reg = <0x48824000 0x80>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
};
timer8: timer@48826000 {
compatible = "ti,omap5430-timer";
reg = <0x48826000 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
};
timer9: timer@4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
};
timer12: timer@4ae20000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae20000 0x80>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer12";
ti,timer-alwon;
ti,timer-secure;
};
timer13: timer@48828000 {
compatible = "ti,omap5430-timer";
reg = <0x48828000 0x80>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer13";
};
timer14: timer@4882a000 {
compatible = "ti,omap5430-timer";
reg = <0x4882a000 0x80>;
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer14";
};
timer15: timer@4882c000 {
compatible = "ti,omap5430-timer";
reg = <0x4882c000 0x80>;
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer15";
};
timer16: timer@4882e000 {
compatible = "ti,omap5430-timer";
reg = <0x4882e000 0x80>;
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer16";
};
wdt2: wdt@4ae14000 {
compatible = "ti,omap3-wdt";
reg = <0x4ae14000 0x80>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmm";
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
status = "disabled";
};
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
status = "disabled";
};
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
status = "disabled";
};
i2c4: i2c@4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
status = "disabled";
};
i2c5: i2c@4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
status = "disabled";
};
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
};
mmu0_dsp1: mmu@40d01000 {
compatible = "ti,dra7-dsp-iommu";
reg = <0x40d01000 0x100>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu0_dsp1";
#iommu-cells = <0>;
ti,syscon-mmuconfig = <&dsp1_system 0x0>;
status = "disabled";
};
mmu1_dsp1: mmu@40d02000 {
compatible = "ti,dra7-dsp-iommu";
reg = <0x40d02000 0x100>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu1_dsp1";
#iommu-cells = <0>;
ti,syscon-mmuconfig = <&dsp1_system 0x1>;
status = "disabled";
};
mmu_ipu1: mmu@58882000 {
compatible = "ti,dra7-iommu";
reg = <0x58882000 0x100>;
interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu1";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
status = "disabled";
};
mmu_ipu2: mmu@55082000 {
compatible = "ti,dra7-iommu";
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu2";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
status = "disabled";
};
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
<0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x80>;
/* LDOVBBMPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBMPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1060000 0 0x0 0 0x02000000 0x01F00000
1160000 0 0x4 0 0x02000000 0x01F00000
1210000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_ivahd: regulator-abb-ivahd {
compatible = "ti,abb-v3";
regulator-name = "abb_ivahd";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
<0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x40000000>;
/* LDOVBBIVA_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBIVA_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_dspeve: regulator-abb-dspeve {
compatible = "ti,abb-v3";
regulator-name = "abb_dspeve";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
<0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x20000000>;
/* LDOVBBDSPEVE_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBDSPEVE_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_gpu: regulator-abb-gpu {
compatible = "ti,abb-v3";
regulator-name = "abb_gpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
<0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x10000000>;
/* LDOVBBGPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBGPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1090000 0 0x0 0 0x02000000 0x01F00000
1210000 0 0x4 0 0x02000000 0x01F00000
1280000 0 0x8 0 0x02000000 0x01F00000
>;
};
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
dmas = <&sdma_xbar 35>,
<&sdma_xbar 36>,
<&sdma_xbar 37>,
<&sdma_xbar 38>,
<&sdma_xbar 39>,
<&sdma_xbar 40>,
<&sdma_xbar 41>,
<&sdma_xbar 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
status = "disabled";
};
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
dmas = <&sdma_xbar 43>,
<&sdma_xbar 44>,
<&sdma_xbar 45>,
<&sdma_xbar 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
dma-names = "tx0", "rx0";
status = "disabled";
};
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
dma-names = "tx0", "rx0";
status = "disabled";
};
qspi: qspi@4b300000 {
compatible = "ti,dra7xxx-qspi";
reg = <0x4b300000 0x100>,
<0x5c000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
syscon-chipselects = <&scm_conf 0x558>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
clocks = <&qspi_gfclk_div>;
clock-names = "fck";
num-cs = <4>;
interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
/* OCP2SCP3 */
ocp2scp@4a090000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
sata_phy: phy@4A096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
syscon-phy-power = <&scm_conf 0x374>;
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
syscon-pllreset = <&scm_conf 0x3fc>;
#phy-cells = <0>;
};
pcie1_phy: pciephy@4a094000 {
compatible = "ti,phy-pipe3-pcie";
reg = <0x4a094000 0x80>, /* phy_rx */
<0x4a094400 0x64>; /* phy_tx */
reg-names = "phy_rx", "phy_tx";
syscon-phy-power = <&scm_conf_pcie 0x1c>;
syscon-pcs = <&scm_conf_pcie 0x10>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
<&optfclk_pciephy1_32khz>,
<&optfclk_pciephy1_clk>,
<&optfclk_pciephy1_div_clk>,
<&optfclk_pciephy_div>,
<&sys_clkin1>;
clock-names = "dpll_ref", "dpll_ref_m2",
"wkupclk", "refclk",
"div-clk", "phy-div", "sysclk";
#phy-cells = <0>;
};
pcie2_phy: pciephy@4a095000 {
compatible = "ti,phy-pipe3-pcie";
reg = <0x4a095000 0x80>, /* phy_rx */
<0x4a095400 0x64>; /* phy_tx */
reg-names = "phy_rx", "phy_tx";
syscon-phy-power = <&scm_conf_pcie 0x20>;
syscon-pcs = <&scm_conf_pcie 0x10>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
<&optfclk_pciephy2_32khz>,
<&optfclk_pciephy2_clk>,
<&optfclk_pciephy2_div_clk>,
<&optfclk_pciephy_div>,
<&sys_clkin1>;
clock-names = "dpll_ref", "dpll_ref_m2",
"wkupclk", "refclk",
"div-clk", "phy-div", "sysclk";
#phy-cells = <0>;
status = "disabled";
};
};
sata: sata@4a141100 {
compatible = "snps,dwc-ahci";
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
phys = <&sata_phy>;
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
};
rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "rtcss";
clocks = <&sys_32k_ck>;
};
/* OCP2SCP1 */
ocp2scp@4a080000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
reg = <0x4a080000 0x20>;
ti,hwmods = "ocp2scp1";
usb2_phy1: phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x400>;
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy1_always_on_clk32k>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk",
"refclk";
#phy-cells = <0>;
};
usb2_phy2: phy@4a085000 {
compatible = "ti,dra7x-usb2-phy2",
"ti,omap-usb2";
reg = <0x4a085000 0x400>;
syscon-phy-power = <&scm_conf 0xe74>;
clocks = <&usb_phy2_always_on_clk32k>,
<&usb_otg_ss2_refclk960m>;
clock-names = "wkupclk",
"refclk";
#phy-cells = <0>;
};
usb3_phy1: phy@4a084400 {
compatible = "ti,omap-usb3";
reg = <0x4a084400 0x80>,
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
syscon-phy-power = <&scm_conf 0x370>;
clocks = <&usb_phy3_always_on_clk32k>,
<&sys_clkin1>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk",
"sysclk",
"refclk";
#phy-cells = <0>;
};
};
omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
reg = <0x48880000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
usb1: usb@48890000 {
compatible = "snps,dwc3";
reg = <0x48890000 0x17000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "peripheral",
"host",
"otg";
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
maximum-speed = "super-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
};
};
omap_dwc3_2: omap_dwc3_2@488c0000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss2";
reg = <0x488c0000 0x10000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
usb2: usb@488d0000 {
compatible = "snps,dwc3";
reg = <0x488d0000 0x17000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "peripheral",
"host",
"otg";
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
};
};
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
omap_dwc3_3: omap_dwc3_3@48900000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss3";
reg = <0x48900000 0x10000>;
interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
status = "disabled";
usb3: usb@48910000 {
compatible = "snps,dwc3";
reg = <0x48910000 0x17000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "peripheral",
"host",
"otg";
maximum-speed = "high-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
};
};
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0xfc0>; /* device IO registers */
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "elm";
status = "disabled";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 4 0>;
dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
atl: atl@4843c000 {
compatible = "ti,dra7-atl";
reg = <0x4843c000 0x3ff>;
ti,hwmods = "atl";
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
clocks = <&atl_gfclk_mux>;
clock-names = "fck";
status = "disabled";
};
mcasp1: mcasp@48460000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x48460000 0x2000>,
<0x45800000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
dma-names = "tx", "rx";
clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
<&mcasp1_ahclkr_mux>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
mcasp2: mcasp@48464000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp2";
reg = <0x48464000 0x2000>,
<0x45c00000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
dma-names = "tx", "rx";
clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
<&mcasp2_ahclkr_mux>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
mcasp3: mcasp@48468000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp3";
reg = <0x48468000 0x2000>,
<0x46000000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp4: mcasp@4846c000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp4";
reg = <0x4846c000 0x2000>,
<0x48436000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
dma-names = "tx", "rx";
clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp5: mcasp@48470000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp5";
reg = <0x48470000 0x2000>,
<0x4843a000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
dma-names = "tx", "rx";
clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp6: mcasp@48474000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp6";
reg = <0x48474000 0x2000>,
<0x4844c000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
dma-names = "tx", "rx";
clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp7: mcasp@48478000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp7";
reg = <0x48478000 0x2000>,
<0x48450000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
dma-names = "tx", "rx";
clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp8: mcasp@4847c000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp8";
reg = <0x4847c000 0x2000>,
<0x48454000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
dma-names = "tx", "rx";
clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
interrupt-controller;
interrupt-parent = <&wakeupgen>;
#interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
ti,irqs-skip = <10 133 139 140>;
ti,irqs-safe-map = <0>;
};
mac: ethernet@48484000 {
compatible = "ti,dra7-cpsw","ti,cpsw";
ti,hwmods = "gmac";
clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
clock-names = "fck", "cpts";
cpdma_channels = <8>;
ale_entries = <1024>;
bd_ram_size = <0x2000>;
no_bd_ram = <0>;
rx_descs = <64>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
reg = <0x48484000 0x1000
0x48485200 0x2E00>;
#address-cells = <1>;
#size-cells = <1>;
/*
* Do not allow gating of cpsw clock as workaround
* for errata i877. Keeping internal clock disabled
* causes the device switching characteristics
* to degrade over time and eventually fail to meet
* the data manual delay time/skew specs.
*/
ti,no-idle;
/*
* rx_thresh_pend
* rx_pend
* tx_pend
* misc_pend
*/
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
ranges;
syscon = <&scm_conf>;
status = "disabled";
davinci_mdio: mdio@48485000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
reg = <0x48485000 0x100>;
};
cpsw_emac0: slave@48480200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@48480300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
phy_sel: cpsw-phy-sel@4a002554 {
compatible = "ti,dra7xx-cpsw-phy-sel";
reg= <0x4a002554 0x4>;
reg-names = "gmii-sel";
};
};
dcan1: can@481cc000 {
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan1";
reg = <0x4ae3c000 0x2000>;
syscon-raminit = <&scm_conf 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dcan1_sys_clk_mux>;
status = "disabled";
};
dcan2: can@481d0000 {
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan2";
reg = <0x48480000 0x2000>;
syscon-raminit = <&scm_conf 0x558 1>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_clkin1>;
status = "disabled";
};
dss: dss@58000000 {
compatible = "ti,dra7-dss";
/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
status = "disabled";
ti,hwmods = "dss_core";
/* CTRL_CORE_DSS_PLL_CONTROL */
syscon-pll-ctrl = <&scm_conf 0x538>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@58001000 {
compatible = "ti,dra7-dispc";
reg = <0x58001000 0x1000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dss_dispc";
clocks = <&dss_dss_clk>;
clock-names = "fck";
/* CTRL_CORE_SMA_SW_1 */
syscon-pol = <&scm_conf 0x534>;
};
hdmi: encoder@58060000 {
compatible = "ti,dra7-hdmi";
reg = <0x58040000 0x200>,
<0x58040200 0x80>,
<0x58040300 0x80>,
<0x58060000 0x19000>;
reg-names = "wp", "pll", "phy", "core";
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ti,hwmods = "dss_hdmi";
clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
clock-names = "fck", "sys_clk";
};
};
};
thermal_zones: thermal-zones {
#include "omap4-cpu-thermal.dtsi"
#include "omap5-gpu-thermal.dtsi"
#include "omap5-core-thermal.dtsi"
#include "dra7-dspeve-thermal.dtsi"
#include "dra7-iva-thermal.dtsi"
};
};
&cpu_thermal {
polling-delay = <500>; /* milliseconds */
};
/include/ "dra7xx-clocks.dtsi"