swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 523d939ef98fd712632d93a5a2b588e477a7565e authored by Linus Torvalds on 24 July 2016, 19:23:50 UTC
Linux 4.7
Linux 4.7
Tip revision: 523d939
pxa168.dtsi
/*
* Copyright (C) 2012 Marvell Technology Group Ltd.
* Author: Haojian Zhuang <haojian.zhuang@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,pxa168.h>
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
i2c0 = &twsi1;
i2c1 = &twsi2;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
axi@d4200000 { /* AXI */
compatible = "mrvl,axi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd4200000 0x00200000>;
ranges;
intc: interrupt-controller@d4282000 {
compatible = "mrvl,mmp-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xd4282000 0x1000>;
mrvl,intc-nr-irqs = <64>;
};
};
apb@d4000000 { /* APB */
compatible = "mrvl,apb-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd4000000 0x00200000>;
ranges;
timer0: timer@d4014000 {
compatible = "mrvl,mmp-timer";
reg = <0xd4014000 0x100>;
interrupts = <13>;
};
uart1: uart@d4017000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
clocks = <&soc_clocks PXA168_CLK_UART0>;
resets = <&soc_clocks PXA168_CLK_UART0>;
status = "disabled";
};
uart2: uart@d4018000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
clocks = <&soc_clocks PXA168_CLK_UART1>;
resets = <&soc_clocks PXA168_CLK_UART1>;
status = "disabled";
};
uart3: uart@d4026000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4026000 0x1000>;
interrupts = <29>;
clocks = <&soc_clocks PXA168_CLK_UART2>;
resets = <&soc_clocks PXA168_CLK_UART2>;
status = "disabled";
};
gpio@d4019000 {
compatible = "marvell,mmp-gpio";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd4019000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <49>;
clocks = <&soc_clocks PXA168_CLK_GPIO>;
resets = <&soc_clocks PXA168_CLK_GPIO>;
interrupt-names = "gpio_mux";
interrupt-controller;
#interrupt-cells = <1>;
ranges;
gcb0: gpio@d4019000 {
reg = <0xd4019000 0x4>;
};
gcb1: gpio@d4019004 {
reg = <0xd4019004 0x4>;
};
gcb2: gpio@d4019008 {
reg = <0xd4019008 0x4>;
};
gcb3: gpio@d4019100 {
reg = <0xd4019100 0x4>;
};
};
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
clocks = <&soc_clocks PXA168_CLK_TWSI0>;
resets = <&soc_clocks PXA168_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
twsi2: i2c@d4025000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
clocks = <&soc_clocks PXA168_CLK_TWSI1>;
resets = <&soc_clocks PXA168_CLK_TWSI1>;
status = "disabled";
};
rtc: rtc@d4010000 {
compatible = "mrvl,mmp-rtc";
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
clocks = <&soc_clocks PXA168_CLK_RTC>;
resets = <&soc_clocks PXA168_CLK_RTC>;
status = "disabled";
};
};
soc_clocks: clocks{
compatible = "marvell,pxa168-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
<0xd4015000 0x1000>;
reg-names = "mpmu", "apmu", "apbc";
#clock-cells = <1>;
#reset-cells = <1>;
};
};
};