swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52 authored by Linus Torvalds on 03 November 2013, 23:41:51 UTC
Linux 3.12
Linux 3.12
Tip revision: 5e01dc7
vf610.dtsi
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "skeleton.dtsi"
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
/ {
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a5";
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
sxosc {
compatible = "fixed-clock";
clock-frequency = <32768>;
};
fxosc {
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
aips0: aips-bus@40000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
reg = <0x40000000 0x70000>;
ranges;
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
L2: l2-cache@40006000 {
compatible = "arm,pl310-cache";
reg = <0x40006000 0x1000>;
cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
};
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
interrupts = <0 61 0x00>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
status = "disabled";
};
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
interrupts = <0 62 0x04>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
status = "disabled";
};
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
interrupts = <0 63 0x04>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
status = "disabled";
};
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
interrupts = <0 64 0x04>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
status = "disabled";
};
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <0 86 0x04>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
status = "disabled";
};
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
interrupts = <0 39 0x04>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
clocks = <&clks VF610_CLK_WDT>;
clock-names = "wdog";
};
qspi0: quadspi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
interrupts = <0 24 0x04>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
iomuxc: iomuxc@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
#gpio-range-cells = <3>;
/* functions and groups pins */
dcu0 {
pinctrl_dcu0_1: dcu0grp_1 {
fsl,pins = <
VF610_PAD_PTB8__GPIO_30 0x42
VF610_PAD_PTE0__DCU0_HSYNC 0x42
VF610_PAD_PTE1__DCU0_VSYNC 0x42
VF610_PAD_PTE2__DCU0_PCLK 0x42
VF610_PAD_PTE4__DCU0_DE 0x42
VF610_PAD_PTE5__DCU0_R0 0x42
VF610_PAD_PTE6__DCU0_R1 0x42
VF610_PAD_PTE7__DCU0_R2 0x42
VF610_PAD_PTE8__DCU0_R3 0x42
VF610_PAD_PTE9__DCU0_R4 0x42
VF610_PAD_PTE10__DCU0_R5 0x42
VF610_PAD_PTE11__DCU0_R6 0x42
VF610_PAD_PTE12__DCU0_R7 0x42
VF610_PAD_PTE13__DCU0_G0 0x42
VF610_PAD_PTE14__DCU0_G1 0x42
VF610_PAD_PTE15__DCU0_G2 0x42
VF610_PAD_PTE16__DCU0_G3 0x42
VF610_PAD_PTE17__DCU0_G4 0x42
VF610_PAD_PTE18__DCU0_G5 0x42
VF610_PAD_PTE19__DCU0_G6 0x42
VF610_PAD_PTE20__DCU0_G7 0x42
VF610_PAD_PTE21__DCU0_B0 0x42
VF610_PAD_PTE22__DCU0_B1 0x42
VF610_PAD_PTE23__DCU0_B2 0x42
VF610_PAD_PTE24__DCU0_B3 0x42
VF610_PAD_PTE25__DCU0_B4 0x42
VF610_PAD_PTE26__DCU0_B5 0x42
VF610_PAD_PTE27__DCU0_B6 0x42
VF610_PAD_PTE28__DCU0_B7 0x42
>;
};
};
dspi0 {
pinctrl_dspi0_1: dspi0grp_1 {
fsl,pins = <
VF610_PAD_PTB19__DSPI0_CS0 0x1182
VF610_PAD_PTB20__DSPI0_SIN 0x1181
VF610_PAD_PTB21__DSPI0_SOUT 0x1182
VF610_PAD_PTB22__DSPI0_SCK 0x1182
>;
};
};
esdhc1 {
pinctrl_esdhc1_1: esdhc1grp_1 {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTA7__GPIO_134 0x219d
>;
};
};
fec0 {
pinctrl_fec0_1: fec0grp_1 {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
>;
};
};
fec1 {
pinctrl_fec1_1: fec1grp_1 {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
};
i2c0 {
pinctrl_i2c0_1: i2c0grp_1 {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x30d3
VF610_PAD_PTB15__I2C0_SDA 0x30d3
>;
};
};
pwm0 {
pinctrl_pwm0_1: pwm0grp_1 {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1582
VF610_PAD_PTB1__FTM0_CH1 0x1582
VF610_PAD_PTB2__FTM0_CH2 0x1582
VF610_PAD_PTB3__FTM0_CH3 0x1582
VF610_PAD_PTB6__FTM0_CH6 0x1582
VF610_PAD_PTB7__FTM0_CH7 0x1582
>;
};
};
qspi0 {
pinctrl_qspi0_1: qspi0grp_1 {
fsl,pins = <
VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b
VF610_PAD_PTD1__QSPI0_A_CS0 0x307f
VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073
VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073
VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073
VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b
VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b
VF610_PAD_PTD8__QSPI0_B_CS0 0x307f
VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073
VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073
VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073
VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b
>;
};
};
sai2 {
pinctrl_sai2_1: sai2grp_1 {
fsl,pins = <
VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp_1 {
fsl,pins = <
VF610_PAD_PTB4__UART1_TX 0x21a2
VF610_PAD_PTB5__UART1_RX 0x21a1
>;
};
};
usbvbus {
pinctrl_usbvbus_1: usbvbusgrp_1 {
fsl,pins = <
VF610_PAD_PTA24__USB1_VBUS_EN 0x219c
VF610_PAD_PTA16__USB0_VBUS_EN 0x219c
>;
};
};
};
gpio1: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
interrupts = <0 107 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
};
gpio2: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
interrupts = <0 108 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
};
gpio3: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
interrupts = <0 109 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
};
gpio4: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
interrupts = <0 110 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
};
gpio5: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
interrupts = <0 111 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
};
anatop@40050000 {
compatible = "fsl,vf610-anatop";
reg = <0x40050000 0x1000>;
};
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
interrupts =<0 71 0x04>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
status = "disabled";
};
clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
#clock-cells = <1>;
};
};
aips1: aips-bus@40080000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40080000 0x80000>;
ranges;
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
interrupts = <0 65 0x04>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
};
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
interrupts = <0 66 0x04>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <0 78 0x04>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <0 79 0x04>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
};
};