swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: b098d6726bbfb94c06d6e1097466187afddae61f authored by Linus Torvalds on 25 March 2014, 02:31:17 UTC
Linux 3.14-rc8
Linux 3.14-rc8
Tip revision: b098d67
Kconfig
config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
select CLKSRC_MMIO
select COMMON_CLK
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
select PINCTRL
select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
menu "Freescale i.MX support"
depends on ARCH_MXC
config MXC_TZIC
bool
config MXC_AVIC
bool
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
board. On debug board, several debug devices(ethernet, UART,
buttons, LEDs and JTAG) are implemented. Between the MCU and
these devices, a CPLD is added as a bridge which performs
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
config HAVE_EPIT
bool
config MXC_USE_EPIT
bool "Use EPIT instead of GPT"
depends on HAVE_EPIT
help
Use EPIT as the system timer on systems that have it. Normally you
don't have a reason to do so as the EPIT has the same features and
uses the same clocks as the GPT. Anyway, on some systems the GPT
may be in use for other purposes.
config ARCH_HAS_RNGA
bool
config HAVE_IMX_ANATOP
bool
config HAVE_IMX_GPC
bool
config HAVE_IMX_MMDC
bool
config HAVE_IMX_SRC
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
config IMX_HAVE_IOMUX_V1
bool
config ARCH_MXC_IOMUX_V3
bool
config ARCH_MX1
bool
config ARCH_MX25
bool
config MACH_MX27
bool
config SOC_IMX1
bool
select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX21
bool
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
config SOC_IMX27
bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MACH_MX27
select MXC_AVIC
select PINCTRL_IMX27
config SOC_IMX31
bool
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
select SMP_ON_UP if SMP
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
select PINCTRL
config SOC_IMX5
bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select CPU_V7
select MXC_TZIC
config SOC_IMX51
bool
select HAVE_IMX_SRC
select PINCTRL_IMX51
select SOC_IMX5
if ARCH_MULTI_V4T
comment "MX1 platforms:"
config MACH_MXLADS
bool
config ARCH_MX1ADS
bool "MX1ADS platform"
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select MACH_MXLADS
select SOC_IMX1
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX1
help
Say Y here if you are using a Synertronixx scb9328 board
config MACH_APF9328
bool "APF9328"
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX1
help
Say Yes here if you are using the Armadeus APF9328 development board
endif
if ARCH_MULTI_V5
comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select SOC_IMX21
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX25
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MACH_IMX25_DT
bool "Support i.MX25 platforms from device tree"
select SOC_IMX25
help
Include support for Freescale i.MX25 based platforms
using the device tree for discovery
comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select SOC_IMX27
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_PCM038
default MACH_PCM970_BASEBOARD
config MACH_PCM970_BASEBOARD
bool "PHYTEC PCM970 development board"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_MXC_MMC
help
This adds board specific devices that can be found on Phytec's
PCM970 evaluation board.
endchoice
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
depends on MACH_CPUIMX27
select IMX_HAVE_PLATFORM_MXC_MMC
help
This adds support for the internal SDHC2 used on CPUIMX27
for wifi or eMMC.
config MACH_EUKREA_CPUIMX27_USEUART4
bool "CPUIMX27 integrates UART4 module"
depends on MACH_CPUIMX27
help
This adds support for the internal UART4 used on CPUIMX27
for bluetooth.
choice
prompt "Baseboard"
depends on MACH_CPUIMX27
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
bool "Eukrea MBIMX27 development board"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
endchoice
config MACH_MX27_3DS
bool "MX27PDK platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MX2_EMMA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
select SOC_IMX27
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
peripherals.
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX27
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select SOC_IMX27
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
config MACH_IMX27IPCAM
bool "IMX27 IPCAM platform"
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX27
help
Include support for IMX27 IPCAM platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
endif
if ARCH_MULTI_V6
comment "MX31 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
default y
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
depends on MFD_WM8350_I2C
depends on REGULATOR_WM8350 = y
help
Include support for the Wolfson Microelectronics 1133-EV1 PMU
and audio module for the MX31ADS platform.
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_SPI_IMX
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS_MXC_NAND_USE_BBT
bool "Make the MXC NAND driver use the in flash Bad Block Table"
depends on MACH_MX31_3DS
depends on MTD_NAND_MXC
help
Enable this if you want that the MXC NAND driver uses the in flash
Bad Block Table to know what blocks are bad instead of scanning the
entire flash looking for bad block markers.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_BUG
bool "Support Buglabs BUGBase platform"
default y
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX31_DT
bool "Support i.MX31 platforms from device tree"
select SOC_IMX31
help
Include support for Freescale i.MX31 based platforms
using the device tree for discovery.
comment "MX35 platforms:"
config MACH_IMX35_DT
bool "Support i.MX35 platforms from device tree"
select SOC_IMX35
help
Include support for Freescale i.MX35 based platforms
using the device tree for discovery.
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX35
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_DEBUG_BOARD
select SOC_IMX35
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX35
help
Include support for Eukrea CPUIMX35 platform. This includes
specific configurations for the board and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MACH_VPR200
bool "Support VPR200 platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX35
help
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
endif
if ARCH_MULTI_V7
comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select SOC_IMX51
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
peripherals.
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select SOC_IMX51
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX51SD
default MACH_EUKREA_MBIMXSD51_BASEBOARD
config MACH_EUKREA_MBIMXSD51_BASEBOARD
prompt "Eukrea MBIMXSD development board"
bool
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
comment "Device tree only"
config SOC_IMX50
bool "i.MX50 support"
select HAVE_IMX_SRC
select PINCTRL_IMX50
select SOC_IMX5
help
This enables support for Freescale i.MX50 processor.
config SOC_IMX53
bool "i.MX53 support"
select HAVE_IMX_SRC
select IMX_HAVE_PLATFORM_IMX2_WDT
select PINCTRL_IMX53
select SOC_IMX5
help
This enables support for Freescale i.MX53 processor.
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select PINCTRL_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
select PM_OPP if PM
help
This enables support for Freescale i.MX6 Quad processor.
config SOC_IMX6SL
bool "i.MX6 SoloLite support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
select CPU_V7
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
select PINCTRL_IMX6SL
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
help
This enables support for Freescale i.MX6 SoloLite processor.
config SOC_VF610
bool "Vybrid Family VF610 support"
select CPU_V7
select ARM_GIC
select CLKSRC_OF
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
help
This enable support for Freescale Vybrid VF610 processor.
endif
source "arch/arm/mach-imx/devices/Kconfig"
endmenu