swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 5908e6b738e3357af42c10e1183753c70a0117a9 authored by Linus Torvalds on 25 February 2019, 00:46:45 UTC
Linux 5.0-rc8
Linux 5.0-rc8
Tip revision: 5908e6b
ehci-imx27.c
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX27_OTG_SIC_SHIFT 29
#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT)
#define MX27_OTG_PM_BIT (1 << 24)
#define MX27_H2_SIC_SHIFT 21
#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT)
#define MX27_H2_PM_BIT (1 << 16)
#define MX27_H2_DT_BIT (1 << 5)
#define MX27_H1_SIC_SHIFT 13
#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT)
#define MX27_H1_PM_BIT (1 << 8)
#define MX27_H1_DT_BIT (1 << 4)
int mx27_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX27_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX27_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}