swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: b9bbe6ed63b2b9f2c9ee5cbd0f2c946a2723f4ce authored by Linus Torvalds on 17 May 2020, 23:48:37 UTC
Linux 5.7-rc6
Linux 5.7-rc6
Tip revision: b9bbe6e
platsmp.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
* Copyright (c) 2014 The Linux Foundation. All rights reserved.
*/
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/qcom_scm.h>
#include <asm/smp_plat.h>
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0
#define SCSS_CPU1CORE_RESET 0x2d80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0x2e64
#define APCS_CPU_PWR_CTL 0x04
#define PLL_CLAMP BIT(8)
#define CORE_PWRD_UP BIT(7)
#define COREPOR_RST BIT(5)
#define CORE_RST BIT(4)
#define L2DT_SLP BIT(3)
#define CLAMP BIT(0)
#define APC_PWR_GATE_CTL 0x14
#define BHS_CNT_SHIFT 24
#define LDO_PWR_DWN_SHIFT 16
#define LDO_BYP_SHIFT 8
#define BHS_SEG_SHIFT 1
#define BHS_EN BIT(0)
#define APCS_SAW2_VCTL 0x14
#define APCS_SAW2_2_VCTL 0x1c
extern void secondary_startup_arm(void);
#ifdef CONFIG_HOTPLUG_CPU
static void qcom_cpu_die(unsigned int cpu)
{
wfi();
}
#endif
static int scss_release_secondary(unsigned int cpu)
{
struct device_node *node;
void __iomem *base;
node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
if (!node) {
pr_err("%s: can't find node\n", __func__);
return -ENXIO;
}
base = of_iomap(node, 0);
of_node_put(node);
if (!base)
return -ENOMEM;
writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
mb();
iounmap(base);
return 0;
}
static int kpssv1_release_secondary(unsigned int cpu)
{
int ret = 0;
void __iomem *reg, *saw_reg;
struct device_node *cpu_node, *acc_node, *saw_node;
u32 val;
cpu_node = of_get_cpu_node(cpu, NULL);
if (!cpu_node)
return -ENODEV;
acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
if (!acc_node) {
ret = -ENODEV;
goto out_acc;
}
saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
if (!saw_node) {
ret = -ENODEV;
goto out_saw;
}
reg = of_iomap(acc_node, 0);
if (!reg) {
ret = -ENOMEM;
goto out_acc_map;
}
saw_reg = of_iomap(saw_node, 0);
if (!saw_reg) {
ret = -ENOMEM;
goto out_saw_map;
}
/* Turn on CPU rail */
writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
mb();
udelay(512);
/* Krait bring-up sequence */
val = PLL_CLAMP | L2DT_SLP | CLAMP;
writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
val &= ~L2DT_SLP;
writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
mb();
ndelay(300);
val |= COREPOR_RST;
writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
mb();
udelay(2);
val &= ~CLAMP;
writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
mb();
udelay(2);
val &= ~COREPOR_RST;
writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
mb();
udelay(100);
val |= CORE_PWRD_UP;
writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
mb();
iounmap(saw_reg);
out_saw_map:
iounmap(reg);
out_acc_map:
of_node_put(saw_node);
out_saw:
of_node_put(acc_node);
out_acc:
of_node_put(cpu_node);
return ret;
}
static int kpssv2_release_secondary(unsigned int cpu)
{
void __iomem *reg;
struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
void __iomem *l2_saw_base;
unsigned reg_val;
int ret;
cpu_node = of_get_cpu_node(cpu, NULL);
if (!cpu_node)
return -ENODEV;
acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
if (!acc_node) {
ret = -ENODEV;
goto out_acc;
}
l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
if (!l2_node) {
ret = -ENODEV;
goto out_l2;
}
saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
if (!saw_node) {
ret = -ENODEV;
goto out_saw;
}
reg = of_iomap(acc_node, 0);
if (!reg) {
ret = -ENOMEM;
goto out_map;
}
l2_saw_base = of_iomap(saw_node, 0);
if (!l2_saw_base) {
ret = -ENOMEM;
goto out_saw_map;
}
/* Turn on the BHS, turn off LDO Bypass and power down LDO */
reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
mb();
/* wait for the BHS to settle */
udelay(1);
/* Turn on BHS segments */
reg_val |= 0x3f << BHS_SEG_SHIFT;
writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
mb();
/* wait for the BHS to settle */
udelay(1);
/* Finally turn on the bypass so that BHS supplies power */
reg_val |= 0x3f << LDO_BYP_SHIFT;
writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
/* enable max phases */
writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
mb();
udelay(50);
reg_val = COREPOR_RST | CLAMP;
writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
mb();
udelay(2);
reg_val &= ~CLAMP;
writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
mb();
udelay(2);
reg_val &= ~COREPOR_RST;
writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
mb();
reg_val |= CORE_PWRD_UP;
writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
mb();
ret = 0;
iounmap(l2_saw_base);
out_saw_map:
iounmap(reg);
out_map:
of_node_put(saw_node);
out_saw:
of_node_put(l2_node);
out_l2:
of_node_put(acc_node);
out_acc:
of_node_put(cpu_node);
return ret;
}
static DEFINE_PER_CPU(int, cold_boot_done);
static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
{
int ret = 0;
if (!per_cpu(cold_boot_done, cpu)) {
ret = func(cpu);
if (!ret)
per_cpu(cold_boot_done, cpu) = true;
}
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return ret;
}
static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
return qcom_boot_secondary(cpu, scss_release_secondary);
}
static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
return qcom_boot_secondary(cpu, kpssv1_release_secondary);
}
static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
return qcom_boot_secondary(cpu, kpssv2_release_secondary);
}
static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu;
if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
cpu_present_mask)) {
for_each_present_cpu(cpu) {
if (cpu == smp_processor_id())
continue;
set_cpu_present(cpu, false);
}
pr_warn("Failed to set CPU boot address, disabling SMP\n");
}
}
static const struct smp_operations smp_msm8660_ops __initconst = {
.smp_prepare_cpus = qcom_smp_prepare_cpus,
.smp_boot_secondary = msm8660_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = qcom_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
.smp_prepare_cpus = qcom_smp_prepare_cpus,
.smp_boot_secondary = kpssv1_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = qcom_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
.smp_prepare_cpus = qcom_smp_prepare_cpus,
.smp_boot_secondary = kpssv2_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = qcom_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);