swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: d93dc5c4478c1fd5de85a3e8aece9aad7bbae044 authored by Linus Torvalds on 21 September 2011, 23:58:15 UTC
Linux 3.1-rc7
Linux 3.1-rc7
Tip revision: d93dc5c
pm.c
/* linux/arch/arm/plat-s3c64xx/pm.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX CPU PM support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-syscon-power.h>
#include <mach/regs-gpio-memport.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
unsigned long flags;
int i;
local_irq_save(flags);
for (i = 0; i < 4; i++) {
if (clear & (1 << i))
gpio_set_value(S3C64XX_GPN(12 + i), 0);
if (set & (1 << i))
gpio_set_value(S3C64XX_GPN(12 + i), 1);
}
local_irq_restore(flags);
}
#endif
static struct sleep_save core_save[] = {
SAVE_ITEM(S3C_APLL_LOCK),
SAVE_ITEM(S3C_MPLL_LOCK),
SAVE_ITEM(S3C_EPLL_LOCK),
SAVE_ITEM(S3C_CLK_SRC),
SAVE_ITEM(S3C_CLK_DIV0),
SAVE_ITEM(S3C_CLK_DIV1),
SAVE_ITEM(S3C_CLK_DIV2),
SAVE_ITEM(S3C_CLK_OUT),
SAVE_ITEM(S3C_HCLK_GATE),
SAVE_ITEM(S3C_PCLK_GATE),
SAVE_ITEM(S3C_SCLK_GATE),
SAVE_ITEM(S3C_MEM0_GATE),
SAVE_ITEM(S3C_EPLL_CON1),
SAVE_ITEM(S3C_EPLL_CON0),
SAVE_ITEM(S3C64XX_MEM0DRVCON),
SAVE_ITEM(S3C64XX_MEM1DRVCON),
#ifndef CONFIG_CPU_FREQ
SAVE_ITEM(S3C_APLL_CON),
SAVE_ITEM(S3C_MPLL_CON),
#endif
};
static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C64XX_AHB_CON0),
SAVE_ITEM(S3C64XX_AHB_CON1),
SAVE_ITEM(S3C64XX_AHB_CON2),
SAVE_ITEM(S3C64XX_SPCON),
SAVE_ITEM(S3C64XX_MEM0CONSTOP),
SAVE_ITEM(S3C64XX_MEM1CONSTOP),
SAVE_ITEM(S3C64XX_MEM0CONSLP0),
SAVE_ITEM(S3C64XX_MEM0CONSLP1),
SAVE_ITEM(S3C64XX_MEM1CONSLP),
};
void s3c_pm_configure_extint(void)
{
__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
}
void s3c_pm_restore_core(void)
{
__raw_writel(0, S3C64XX_EINT_MASK);
s3c_pm_debug_smdkled(1 << 2, 0);
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
void s3c_pm_save_core(void)
{
s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
* put the per-cpu code in here until any new cpu comes along and changes
* this.
*/
static int s3c64xx_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
/* set our standby method to sleep */
tmp = __raw_readl(S3C64XX_PWR_CFG);
tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
__raw_writel(tmp, S3C64XX_PWR_CFG);
/* clear any old wakeup */
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
S3C64XX_WAKEUP_STAT);
/* set the LED state to 0110 over sleep */
s3c_pm_debug_smdkled(3 << 1, 0xf);
/* issue the standby signal into the pm unit. Note, we
* issue a write-buffer drain just in case */
tmp = 0;
asm("b 1f\n\t"
".align 5\n\t"
"1:\n\t"
"mcr p15, 0, %0, c7, c10, 5\n\t"
"mcr p15, 0, %0, c7, c10, 4\n\t"
"mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
/* we should never get past here */
panic("sleep resumed to originator?");
}
/* mapping of interrupts to parts of the wakeup mask */
static struct samsung_wakeup_mask wake_irqs[] = {
{ .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
{ .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
{ .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, },
{ .irq = IRQ_HSMMC0, .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
{ .irq = IRQ_HSMMC1, .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
{ .irq = IRQ_HSMMC2, .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
};
static void s3c64xx_pm_prepare(void)
{
samsung_sync_wakemask(S3C64XX_PWR_CFG,
wake_irqs, ARRAY_SIZE(wake_irqs));
/* store address of resume. */
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
/* ensure previous wakeup state is cleared before sleeping */
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
static int s3c64xx_pm_init(void)
{
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
gpio_direction_output(S3C64XX_GPN(12), 0);
gpio_direction_output(S3C64XX_GPN(13), 0);
gpio_direction_output(S3C64XX_GPN(14), 0);
gpio_direction_output(S3C64XX_GPN(15), 0);
#endif
return 0;
}
arch_initcall(s3c64xx_pm_init);