swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 7111951b8d4973bda27ff663f2cf18b663d15b48 authored by Linus Torvalds on 29 March 2020, 22:25:41 UTC
Linux 5.6
Linux 5.6
Tip revision: 7111951
clock.c
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/arm/mach-sa1100/clock.c
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <mach/generic.h>
static const char * const clk_tucr_parents[] = {
"clk32768", "clk3686400",
};
static DEFINE_SPINLOCK(tucr_lock);
static int clk_gpio27_enable(struct clk_hw *hw)
{
unsigned long flags;
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
local_irq_save(flags);
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
local_irq_restore(flags);
return 0;
}
static void clk_gpio27_disable(struct clk_hw *hw)
{
unsigned long flags;
local_irq_save(flags);
GPDR &= ~GPIO_32_768kHz;
GAFR &= ~GPIO_32_768kHz;
local_irq_restore(flags);
}
static const struct clk_ops clk_gpio27_ops = {
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
static const char * const clk_gpio27_parents[] = {
"tucr-mux",
};
static const struct clk_init_data clk_gpio27_init_data __initconst = {
.name = "gpio27",
.ops = &clk_gpio27_ops,
.parent_names = clk_gpio27_parents,
.num_parents = ARRAY_SIZE(clk_gpio27_parents),
};
/*
* Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
* multiply its input rate by 4 x (4 + PPCR). This calculation gives
* the exact rate. The figures given in the table are the rates rounded
* to 100kHz. Stick with sa11x0_getspeed() for the time being.
*/
static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
return sa11x0_getspeed(0) * 1000;
}
static const struct clk_ops clk_mpll_ops = {
.recalc_rate = clk_mpll_recalc_rate,
};
static const char * const clk_mpll_parents[] = {
"clk3686400",
};
static const struct clk_init_data clk_mpll_init_data __initconst = {
.name = "mpll",
.ops = &clk_mpll_ops,
.parent_names = clk_mpll_parents,
.num_parents = ARRAY_SIZE(clk_mpll_parents),
.flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
};
int __init sa11xx_clk_init(void)
{
struct clk_hw *hw;
int ret;
hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
if (IS_ERR(hw))
return PTR_ERR(hw);
clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
if (IS_ERR(hw))
return PTR_ERR(hw);
clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw)
return -ENOMEM;
hw->init = &clk_mpll_init_data;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(hw);
return ret;
}
clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
clk_hw_register_clkdev(hw, NULL, "1800");
hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
ARRAY_SIZE(clk_tucr_parents), 0,
(void __iomem *)&TUCR, FShft(TUCR_TSEL),
FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
clk_set_rate(hw->clk, 3686400);
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw)
return -ENOMEM;
hw->init = &clk_gpio27_init_data;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(hw);
return ret;
}
clk_hw_register_clkdev(hw, NULL, "sa1111.0");
return 0;
}