swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: dc4060a5dc2557e6b5aa813bf5b73677299d62d2 authored by Linus Torvalds on 14 April 2019, 22:17:41 UTC
Linux 5.1-rc5
Linux 5.1-rc5
Tip revision: dc4060a
spear310.c
/*
* arch/arm/mach-spear3xx/spear310.c
*
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr310: " fmt
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include "generic.h"
#include <mach/spear.h>
#define SPEAR310_UART1_BASE UL(0xB2000000)
#define SPEAR310_UART2_BASE UL(0xB2080000)
#define SPEAR310_UART3_BASE UL(0xB2100000)
#define SPEAR310_UART4_BASE UL(0xB2180000)
#define SPEAR310_UART5_BASE UL(0xB2200000)
/* DMAC platform data's slave info */
struct pl08x_channel_data spear310_dma_info[] = {
{
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart2_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart2_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart3_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart3_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart4_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart4_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart5_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart5_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.periph_buses = PL08X_AHB1,
},
};
/* uart devices plat data */
static struct amba_pl011_data spear310_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart3_tx",
.dma_rx_param = "uart3_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart4_tx",
.dma_rx_param = "uart4_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart5_tx",
.dma_rx_param = "uart5_rx",
},
};
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
&spear310_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
&spear310_uart_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
&spear310_uart_data[2]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
&spear310_uart_data[3]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
&spear310_uart_data[4]),
{}
};
static void __init spear310_dt_init(void)
{
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL);
}
static const char * const spear310_dt_board_compat[] = {
"st,spear310",
"st,spear310-evb",
NULL,
};
static void __init spear310_map_io(void)
{
spear3xx_map_io();
}
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
.map_io = spear310_map_io,
.init_time = spear3xx_timer_init,
.init_machine = spear310_dt_init,
.restart = spear_restart,
.dt_compat = spear310_dt_board_compat,
MACHINE_END