swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Raw File
Tip revision: 5698bd757d55b1bb87edd1a9744ab09c142abfc2 authored by Linus Torvalds on 16 September 2012, 21:58:51 UTC
Linux 3.6-rc6
Tip revision: 5698bd7
board-mop500-msp.c
/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License terms: GNU General Public License (GPL), version 2
 */

#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/pinctrl/consumer.h>

#include <plat/gpio-nomadik.h>
#include <plat/pincfg.h>
#include <plat/ste_dma40.h>

#include <mach/devices.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/msp.h>

#include "ste-dma40-db8500.h"
#include "board-mop500.h"
#include "devices-db8500.h"
#include "pins-db8500.h"

/* MSP1/3 Tx/Rx usage protection */
static DEFINE_SPINLOCK(msp_rxtx_lock);

/* Reference Count */
static int msp_rxtx_ref;

/* Pin modes */
struct pinctrl *msp1_p;
struct pinctrl_state *msp1_def;
struct pinctrl_state *msp1_sleep;

int msp13_i2s_init(void)
{
	int retval = 0;
	unsigned long flags;

	spin_lock_irqsave(&msp_rxtx_lock, flags);
	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
		retval = pinctrl_select_state(msp1_p, msp1_def);
		if (retval)
			pr_err("could not set MSP1 defstate\n");
	}
	if (!retval)
		msp_rxtx_ref++;
	spin_unlock_irqrestore(&msp_rxtx_lock, flags);

	return retval;
}

int msp13_i2s_exit(void)
{
	int retval = 0;
	unsigned long flags;

	spin_lock_irqsave(&msp_rxtx_lock, flags);
	WARN_ON(!msp_rxtx_ref);
	msp_rxtx_ref--;
	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
		retval = pinctrl_select_state(msp1_p, msp1_sleep);
		if (retval)
			pr_err("could not set MSP1 sleepstate\n");
	}
	spin_unlock_irqrestore(&msp_rxtx_lock, flags);

	return retval;
}

static struct stedma40_chan_cfg msp0_dma_rx = {
	.high_priority = true,
	.dir = STEDMA40_PERIPH_TO_MEM,

	.src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,

	.src_info.psize = STEDMA40_PSIZE_LOG_4,
	.dst_info.psize = STEDMA40_PSIZE_LOG_4,

	/* data_width is set during configuration */
};

static struct stedma40_chan_cfg msp0_dma_tx = {
	.high_priority = true,
	.dir = STEDMA40_MEM_TO_PERIPH,

	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
	.dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,

	.src_info.psize = STEDMA40_PSIZE_LOG_4,
	.dst_info.psize = STEDMA40_PSIZE_LOG_4,

	/* data_width is set during configuration */
};

static struct msp_i2s_platform_data msp0_platform_data = {
	.id = MSP_I2S_0,
	.msp_i2s_dma_rx = &msp0_dma_rx,
	.msp_i2s_dma_tx = &msp0_dma_tx,
};

static struct stedma40_chan_cfg msp1_dma_rx = {
	.high_priority = true,
	.dir = STEDMA40_PERIPH_TO_MEM,

	.src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,

	.src_info.psize = STEDMA40_PSIZE_LOG_4,
	.dst_info.psize = STEDMA40_PSIZE_LOG_4,

	/* data_width is set during configuration */
};

static struct stedma40_chan_cfg msp1_dma_tx = {
	.high_priority = true,
	.dir = STEDMA40_MEM_TO_PERIPH,

	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
	.dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,

	.src_info.psize = STEDMA40_PSIZE_LOG_4,
	.dst_info.psize = STEDMA40_PSIZE_LOG_4,

	/* data_width is set during configuration */
};

static struct msp_i2s_platform_data msp1_platform_data = {
	.id = MSP_I2S_1,
	.msp_i2s_dma_rx = NULL,
	.msp_i2s_dma_tx = &msp1_dma_tx,
	.msp_i2s_init = msp13_i2s_init,
	.msp_i2s_exit = msp13_i2s_exit,
};

static struct stedma40_chan_cfg msp2_dma_rx = {
	.high_priority = true,
	.dir = STEDMA40_PERIPH_TO_MEM,

	.src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,

	/* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
	.src_info.psize = STEDMA40_PSIZE_LOG_1,
	.dst_info.psize = STEDMA40_PSIZE_LOG_1,

	/* data_width is set during configuration */
};

static struct stedma40_chan_cfg msp2_dma_tx = {
	.high_priority = true,
	.dir = STEDMA40_MEM_TO_PERIPH,

	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
	.dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,

	.src_info.psize = STEDMA40_PSIZE_LOG_4,
	.dst_info.psize = STEDMA40_PSIZE_LOG_4,

	.use_fixed_channel = true,
	.phy_channel = 1,

	/* data_width is set during configuration */
};

static struct platform_device *db8500_add_msp_i2s(struct device *parent,
			int id,
			resource_size_t base, int irq,
			struct msp_i2s_platform_data *pdata)
{
	struct platform_device *pdev;
	struct resource res[] = {
		DEFINE_RES_MEM(base, SZ_4K),
		DEFINE_RES_IRQ(irq),
	};

	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
		id, irq);
	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
						res, ARRAY_SIZE(res),
						pdata, sizeof(*pdata));
	if (!pdev) {
		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
			id);
		return NULL;
	}

	return pdev;
}

/* Platform device for ASoC MOP500 machine */
static struct platform_device snd_soc_mop500 = {
		.name = "snd-soc-mop500",
		.id = 0,
		.dev = {
			.platform_data = NULL,
		},
};

/* Platform device for Ux500-PCM */
static struct platform_device ux500_pcm = {
		.name = "ux500-pcm",
		.id = 0,
		.dev = {
			.platform_data = NULL,
		},
};

static struct msp_i2s_platform_data msp2_platform_data = {
	.id = MSP_I2S_2,
	.msp_i2s_dma_rx = &msp2_dma_rx,
	.msp_i2s_dma_tx = &msp2_dma_tx,
};

static struct msp_i2s_platform_data msp3_platform_data = {
	.id		= MSP_I2S_3,
	.msp_i2s_dma_rx	= &msp1_dma_rx,
	.msp_i2s_dma_tx	= NULL,
	.msp_i2s_init = msp13_i2s_init,
	.msp_i2s_exit = msp13_i2s_exit,
};

int mop500_msp_init(struct device *parent)
{
	struct platform_device *msp1;

	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
	platform_device_register(&snd_soc_mop500);

	pr_info("Initialize MSP I2S-devices.\n");
	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
			   &msp0_platform_data);
	msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
			   &msp1_platform_data);
	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
			   &msp2_platform_data);
	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
			   &msp3_platform_data);

	/* Get the pinctrl handle for MSP1 */
	if (msp1) {
		msp1_p = pinctrl_get(&msp1->dev);
		if (IS_ERR(msp1_p))
			dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
		else {
			msp1_def = pinctrl_lookup_state(msp1_p,
							PINCTRL_STATE_DEFAULT);
			if (IS_ERR(msp1_def)) {
				dev_err(&msp1->dev,
					"could not get MSP1 defstate\n");
			}
			msp1_sleep = pinctrl_lookup_state(msp1_p,
							  PINCTRL_STATE_SLEEP);
			if (IS_ERR(msp1_sleep))
				dev_err(&msp1->dev,
					"could not get MSP1 idlestate\n");
		}
	}

	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
	platform_device_register(&ux500_pcm);

	return 0;
}
back to top