swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 2dcd0af568b0cf583645c8a317dd12e344b1c72a authored by Linus Torvalds on 15 May 2016, 22:43:13 UTC
Linux 4.6
Linux 4.6
Tip revision: 2dcd0af
cpu.c
/*
* linux/arch/arm/mach-w90x900/cpu.c
*
* Copyright (c) 2009 Nuvoton corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
* NUC900 series cpu common support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation;version 2 of the License.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/serial_8250.h>
#include <linux/delay.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#include <mach/regs-serial.h>
#include <mach/regs-clock.h>
#include "regs-ebi.h"
#include "regs-timer.h"
#include "cpu.h"
#include "clock.h"
#include "nuc9xx.h"
/* Initial IO mappings */
static struct map_desc nuc900_iodesc[] __initdata = {
IODESC_ENT(IRQ),
IODESC_ENT(GCR),
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
IODESC_ENT(GPIO),
};
/* Initial clock declarations. */
static DEFINE_CLK(lcd, 0);
static DEFINE_CLK(audio, 1);
static DEFINE_CLK(fmi, 4);
static DEFINE_SUBCLK(ms, 0);
static DEFINE_SUBCLK(sd, 1);
static DEFINE_CLK(dmac, 5);
static DEFINE_CLK(atapi, 6);
static DEFINE_CLK(emc, 7);
static DEFINE_SUBCLK(rmii, 2);
static DEFINE_CLK(usbd, 8);
static DEFINE_CLK(usbh, 9);
static DEFINE_CLK(g2d, 10);
static DEFINE_CLK(pwm, 18);
static DEFINE_CLK(ps2, 24);
static DEFINE_CLK(kpi, 25);
static DEFINE_CLK(wdt, 26);
static DEFINE_CLK(gdma, 27);
static DEFINE_CLK(adc, 28);
static DEFINE_CLK(usi, 29);
static DEFINE_CLK(ext, 0);
static DEFINE_CLK(timer0, 19);
static DEFINE_CLK(timer1, 20);
static DEFINE_CLK(timer2, 21);
static DEFINE_CLK(timer3, 22);
static DEFINE_CLK(timer4, 23);
static struct clk_lookup nuc900_clkregs[] = {
DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
DEF_CLKLOOK(&clk_audio, "nuc900-ac97", NULL),
DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
};
/* Initial serial platform data */
struct plat_serial8250_port nuc900_uart_data[] = {
NUC900_8250PORT(UART0),
{},
};
struct platform_device nuc900_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = nuc900_uart_data,
},
};
/*Set NUC900 series cpu frequence*/
static int __init nuc900_set_clkval(unsigned int cpufreq)
{
unsigned int pllclk, ahbclk, apbclk, val;
pllclk = 0;
ahbclk = 0;
apbclk = 0;
switch (cpufreq) {
case 66:
pllclk = PLL_66MHZ;
ahbclk = AHB_CPUCLK_1_1;
apbclk = APB_AHB_1_2;
break;
case 100:
pllclk = PLL_100MHZ;
ahbclk = AHB_CPUCLK_1_1;
apbclk = APB_AHB_1_2;
break;
case 120:
pllclk = PLL_120MHZ;
ahbclk = AHB_CPUCLK_1_2;
apbclk = APB_AHB_1_2;
break;
case 166:
pllclk = PLL_166MHZ;
ahbclk = AHB_CPUCLK_1_2;
apbclk = APB_AHB_1_2;
break;
case 200:
pllclk = PLL_200MHZ;
ahbclk = AHB_CPUCLK_1_2;
apbclk = APB_AHB_1_2;
break;
}
__raw_writel(pllclk, REG_PLLCON0);
val = __raw_readl(REG_CLKDIV);
val &= ~(0x03 << 24 | 0x03 << 26);
val |= (ahbclk << 24 | apbclk << 26);
__raw_writel(val, REG_CLKDIV);
return 0;
}
static int __init nuc900_set_cpufreq(char *str)
{
unsigned long cpufreq, val;
if (!*str)
return 0;
if (kstrtoul(str, 0, &cpufreq))
return 0;
nuc900_clock_source(NULL, "ext");
nuc900_set_clkval(cpufreq);
mdelay(1);
val = __raw_readl(REG_CKSKEW);
val &= ~0xff;
val |= DEFAULTSKEW;
__raw_writel(val, REG_CKSKEW);
nuc900_clock_source(NULL, "pll0");
return 1;
}
__setup("cpufreq=", nuc900_set_cpufreq);
/*Init NUC900 evb io*/
void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
{
unsigned long idcode = 0x0;
iotable_init(mach_desc, mach_size);
iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
idcode = __raw_readl(NUC900PDID);
if (idcode == NUC910_CPUID)
printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
else if (idcode == NUC920_CPUID)
printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
else if (idcode == NUC950_CPUID)
printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
else if (idcode == NUC960_CPUID)
printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
}
/*Init NUC900 clock*/
void __init nuc900_init_clocks(void)
{
clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
}
#define WTCR (TMR_BA + 0x1C)
#define WTCLK (1 << 10)
#define WTE (1 << 7)
#define WTRE (1 << 1)
void nuc9xx_restart(enum reboot_mode mode, const char *cmd)
{
if (mode == REBOOT_SOFT) {
/* Jump into ROM at address 0 */
soft_restart(0);
} else {
__raw_writel(WTE | WTRE | WTCLK, WTCR);
}
}