swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 94aca1dac6f6d21f4b07e4864baf7768cabcc6e7 authored by Linus Torvalds on 29 September 2008, 22:24:02 UTC
Linux 2.6.27-rc8
Linux 2.6.27-rc8
Tip revision: 94aca1d
irq.c
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/irq.h>
#include <asm/io.h>
#include <mach/common.h>
#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */
#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */
#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */
#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */
#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */
#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */
#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */
#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */
#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
#define IIM_PROD_REV_SH 3
#define IIM_PROD_REV_LEN 5
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
__raw_writel(irq, AVIC_INTDISNUM);
}
/* Enable interrupt number "irq" in the AVIC */
static void mxc_unmask_irq(unsigned int irq)
{
__raw_writel(irq, AVIC_INTENNUM);
}
static struct irq_chip mxc_avic_chip = {
.ack = mxc_mask_irq,
.mask = mxc_mask_irq,
.unmask = mxc_unmask_irq,
};
/*
* This function initializes the AVIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
void __init mxc_init_irq(void)
{
int i;
u32 reg;
/* put the AVIC into the reset value with
* all interrupts disabled
*/
__raw_writel(0, AVIC_INTCNTL);
__raw_writel(0x1f, AVIC_NIMASK);
/* disable all interrupts */
__raw_writel(0, AVIC_INTENABLEH);
__raw_writel(0, AVIC_INTENABLEL);
/* all IRQ no FIQ */
__raw_writel(0, AVIC_INTTYPEH);
__raw_writel(0, AVIC_INTTYPEL);
for (i = 0; i < MXC_MAX_INT_LINES; i++) {
set_irq_chip(i, &mxc_avic_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
/* Set WDOG2's interrupt the highest priority level (bit 28-31) */
reg = __raw_readl(AVIC_NIPRIORITY6);
reg |= (0xF << 28);
__raw_writel(reg, AVIC_NIPRIORITY6);
/* init architectures chained interrupt handler */
mxc_register_gpios();
printk(KERN_INFO "MXC IRQ initialized\n");
}