swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: a351e9b9fc24e982ec2f0e76379a49826036da12 authored by Linus Torvalds on 01 May 2017, 02:47:48 UTC
Linux 4.11
Linux 4.11
Tip revision: a351e9b
entry.S
/*
* entry.S -- interrupt and exception processing for ColdFire
*
* Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
* Kenneth Albanowski <kjahds@kjahds.com>,
* Copyright (C) 2000 Lineo Inc. (www.lineo.com)
* Copyright (C) 2004-2006 Macq Electronique SA. (www.macqel.com)
*
* Based on:
*
* linux/arch/m68k/kernel/entry.S
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file README.legal in the main directory of this archive
* for more details.
*
* Linux/m68k support by Hamish Macdonald
*
* 68060 fixes by Jesper Skov
* ColdFire support by Greg Ungerer (gerg@snapgear.com)
* 5307 fixes by David W. Miller
* linux 2.4 support David McCullough <davidm@snapgear.com>
* Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
*/
#include <linux/linkage.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/errno.h>
#include <asm/setup.h>
#include <asm/segment.h>
#include <asm/asm-offsets.h>
#include <asm/entry.h>
#ifdef CONFIG_COLDFIRE_SW_A7
/*
* Define software copies of the supervisor and user stack pointers.
*/
.bss
sw_ksp:
.long 0
sw_usp:
.long 0
#endif /* CONFIG_COLDFIRE_SW_A7 */
.text
.globl system_call
.globl resume
.globl ret_from_exception
.globl ret_from_signal
.globl sys_call_table
.globl inthandler
enosys:
mov.l #sys_ni_syscall,%d3
bra 1f
ENTRY(system_call)
SAVE_ALL_SYS
move #0x2000,%sr /* enable intrs again */
GET_CURRENT(%d2)
cmpl #NR_syscalls,%d0
jcc enosys
lea sys_call_table,%a0
lsll #2,%d0 /* movel %a0@(%d0:l:4),%d3 */
movel %a0@(%d0),%d3
jeq enosys
1:
movel %sp,%d2 /* get thread_info pointer */
andl #-THREAD_SIZE,%d2 /* at start of kernel stack */
movel %d2,%a0
movel %a0@,%a1 /* save top of frame */
movel %sp,%a1@(TASK_THREAD+THREAD_ESP0)
btst #(TIF_SYSCALL_TRACE%8),%a0@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
bnes 1f
movel %d3,%a0
jbsr %a0@
movel %d0,%sp@(PT_OFF_D0) /* save the return value */
jra ret_from_exception
1:
movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_OFF_D0 */
movel %d2,PT_OFF_D0(%sp) /* on syscall entry */
subql #4,%sp
SAVE_SWITCH_STACK
jbsr syscall_trace_enter
RESTORE_SWITCH_STACK
addql #4,%sp
movel %d3,%a0
jbsr %a0@
movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
jbsr syscall_trace_leave
ret_from_signal:
RESTORE_SWITCH_STACK
addql #4,%sp
ret_from_exception:
move #0x2700,%sr /* disable intrs */
btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */
jeq Luser_return /* if so, skip resched, signals */
#ifdef CONFIG_PREEMPT
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
andl #(1<<TIF_NEED_RESCHED),%d1
jeq Lkernel_return
movel %a0@(TINFO_PREEMPT),%d1
cmpl #0,%d1
jne Lkernel_return
pea Lkernel_return
jmp preempt_schedule_irq /* preempt the kernel */
#endif
Lkernel_return:
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stk adj */
rte
Luser_return:
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */
jne Lwork_to_do /* still work to do */
Lreturn:
RESTORE_USER
Lwork_to_do:
movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
move #0x2000,%sr /* enable intrs again */
btst #TIF_NEED_RESCHED,%d1
jne reschedule
Lsignal_return:
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
pea %sp@(SWITCH_STACK_SIZE)
jsr do_notify_resume
addql #4,%sp
RESTORE_SWITCH_STACK
addql #4,%sp
jmp Luser_return
/*
* This is the generic interrupt handler (for all hardware interrupt
* sources). Calls up to high level code to do all the work.
*/
ENTRY(inthandler)
SAVE_ALL_INT
GET_CURRENT(%d2)
movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
andl #0x03fc,%d0 /* mask out vector only */
movel %sp,%sp@- /* push regs arg */
lsrl #2,%d0 /* calculate real vector # */
movel %d0,%sp@- /* push vector number */
jbsr do_IRQ /* call high level irq handler */
lea %sp@(8),%sp /* pop args off stack */
bra ret_from_exception
/*
* Beware - when entering resume, prev (the current task) is
* in a0, next (the new task) is in a1, so don't change these
* registers until their contents are no longer needed.
*/
ENTRY(resume)
movew %sr,%d1 /* save current status */
movew %d1,%a0@(TASK_THREAD+THREAD_SR)
movel %a0,%d1 /* get prev thread in d1 */
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
RDUSP /* movel %usp,%a3 */
movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
#ifdef CONFIG_MMU
movel %a1,%a2 /* set new current */
#endif
movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
WRUSP /* movel %a3,%usp */
movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
movew %a1@(TASK_THREAD+THREAD_SR),%d7 /* restore new status */
movew %d7,%sr
RESTORE_SWITCH_STACK
rts