swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: bc0195aad0daa2ad5b0d76cce22b167bc3435590 authored by Linus Torvalds on 12 July 2015, 22:10:30 UTC
Linux 4.2-rc2
Linux 4.2-rc2
Tip revision: bc0195a
m525x.c
/***************************************************************************/
/*
* 525x.c -- platform support for ColdFire 525x based boards
*
* Copyright (C) 2012, Steven King <sfking@fdwdc.com>
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfclk.h>
/***************************************************************************/
DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
&clk_sys,
&clk_mcftmr0,
&clk_mcftmr1,
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfqspi0,
NULL
};
/***************************************************************************/
static void __init m525x_qspi_init(void)
{
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
/* set the GPIO function for the qspi cs gpios */
/* FIXME: replace with pinmux/pinctl support */
u32 f = readl(MCFSIM2_GPIOFUNC);
f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
writel(f, MCFSIM2_GPIOFUNC);
/* QSPI irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
MCFSIM_QSPIICR);
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
}
static void __init m525x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
u32 r;
/* first I2C controller uses regular irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
/* second I2C controller is completely different */
r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
m525x_qspi_init();
m525x_i2c_init();
}
/***************************************************************************/