swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 0f57d86787d8b1076ea8f9cbdddda2a46d534a27 authored by Linus Torvalds on 15 June 2015, 01:51:10 UTC
Linux 4.1-rc8
Linux 4.1-rc8
Tip revision: 0f57d86
delay.c
/*
* Precise Delay Loops for S390
*
* Copyright IBM Corp. 1999, 2008
* Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
* Heiko Carstens <heiko.carstens@de.ibm.com>,
*/
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/timex.h>
#include <linux/module.h>
#include <linux/irqflags.h>
#include <linux/interrupt.h>
#include <asm/vtimer.h>
#include <asm/div64.h>
void __delay(unsigned long loops)
{
/*
* To end the bloody studid and useless discussion about the
* BogoMips number I took the liberty to define the __delay
* function in a way that that resulting BogoMips number will
* yield the megahertz number of the cpu. The important function
* is udelay and that is done using the tod clock. -- martin.
*/
asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
}
static void __udelay_disabled(unsigned long long usecs)
{
unsigned long cr0, cr6, new;
u64 clock_saved, end;
end = get_tod_clock() + (usecs << 12);
clock_saved = local_tick_disable();
__ctl_store(cr0, 0, 0);
__ctl_store(cr6, 6, 6);
new = (cr0 & 0xffff00e0) | 0x00000800;
__ctl_load(new , 0, 0);
new = 0;
__ctl_load(new, 6, 6);
lockdep_off();
do {
set_clock_comparator(end);
enabled_wait();
} while (get_tod_clock_fast() < end);
lockdep_on();
__ctl_load(cr0, 0, 0);
__ctl_load(cr6, 6, 6);
local_tick_enable(clock_saved);
}
static void __udelay_enabled(unsigned long long usecs)
{
u64 clock_saved, end;
end = get_tod_clock_fast() + (usecs << 12);
do {
clock_saved = 0;
if (end < S390_lowcore.clock_comparator) {
clock_saved = local_tick_disable();
set_clock_comparator(end);
}
enabled_wait();
if (clock_saved)
local_tick_enable(clock_saved);
} while (get_tod_clock_fast() < end);
}
/*
* Waits for 'usecs' microseconds using the TOD clock comparator.
*/
void __udelay(unsigned long long usecs)
{
unsigned long flags;
preempt_disable();
local_irq_save(flags);
if (in_irq()) {
__udelay_disabled(usecs);
goto out;
}
if (in_softirq()) {
if (raw_irqs_disabled_flags(flags))
__udelay_disabled(usecs);
else
__udelay_enabled(usecs);
goto out;
}
if (raw_irqs_disabled_flags(flags)) {
local_bh_disable();
__udelay_disabled(usecs);
_local_bh_enable();
goto out;
}
__udelay_enabled(usecs);
out:
local_irq_restore(flags);
preempt_enable();
}
EXPORT_SYMBOL(__udelay);
/*
* Simple udelay variant. To be used on startup and reboot
* when the interrupt handler isn't working.
*/
void udelay_simple(unsigned long long usecs)
{
u64 end;
end = get_tod_clock_fast() + (usecs << 12);
while (get_tod_clock_fast() < end)
cpu_relax();
}
void __ndelay(unsigned long long nsecs)
{
u64 end;
nsecs <<= 9;
do_div(nsecs, 125);
end = get_tod_clock_fast() + nsecs;
if (nsecs & ~0xfffUL)
__udelay(nsecs >> 12);
while (get_tod_clock_fast() < end)
barrier();
}
EXPORT_SYMBOL(__ndelay);