swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 4b972a01a7da614b4796475f933094751a295a2f authored by Linus Torvalds on 22 June 2019, 23:01:36 UTC
Linux 5.2-rc6
Linux 5.2-rc6
Tip revision: 4b972a0
ad7793.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver
*
* Copyright 2011-2012 Analog Devices Inc.
*/
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/adc/ad_sigma_delta.h>
#include <linux/platform_data/ad7793.h>
/* Registers */
#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */
#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */
#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */
#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */
#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */
#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */
#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */
#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit
* (AD7792)/24-bit (AD7793)) */
#define AD7793_REG_FULLSALE 7 /* Full-Scale Register
* (RW, 16-bit (AD7792)/24-bit (AD7793)) */
/* Communications Register Bit Designations (AD7793_REG_COMM) */
#define AD7793_COMM_WEN (1 << 7) /* Write Enable */
#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */
#define AD7793_COMM_READ (1 << 6) /* Read Operation */
#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */
#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */
/* Status Register Bit Designations (AD7793_REG_STAT) */
#define AD7793_STAT_RDY (1 << 7) /* Ready */
#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */
#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */
#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */
#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */
/* Mode Register Bit Designations (AD7793_REG_MODE) */
#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */
#define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */
#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */
#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */
#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */
#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */
#define AD7793_MODE_IDLE 2 /* Idle Mode */
#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */
#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */
#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */
#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */
#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */
#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not
* available at the CLK pin */
#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available
* at the CLK pin */
#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */
#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */
/* Configuration Register Bit Designations (AD7793_REG_CONF) */
#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage
* Generator Enable */
#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */
#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */
#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */
#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */
#define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */
#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */
#define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */
#define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */
#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */
#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */
#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */
#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */
#define AD7793_CH_TEMP 6 /* Temp Sensor */
#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */
#define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */
#define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */
#define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */
#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */
/* ID Register Bit Designations (AD7793_REG_ID) */
#define AD7785_ID 0x3
#define AD7792_ID 0xA
#define AD7793_ID 0xB
#define AD7794_ID 0xF
#define AD7795_ID 0xF
#define AD7796_ID 0xA
#define AD7797_ID 0xB
#define AD7798_ID 0x8
#define AD7799_ID 0x9
#define AD7793_ID_MASK 0xF
/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */
#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1,
* IEXC2 connect to IOUT2 */
#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2,
* IEXC2 connect to IOUT1 */
#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources
* IEXC1,2 connect to IOUT1 */
#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources
* IEXC1,2 connect to IOUT2 */
#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */
#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */
#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */
/* NOTE:
* The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
* In order to avoid contentions on the SPI bus, it's therefore necessary
* to use spi bus locking.
*
* The DOUT/RDY output must also be wired to an interrupt capable GPIO.
*/
#define AD7793_FLAG_HAS_CLKSEL BIT(0)
#define AD7793_FLAG_HAS_REFSEL BIT(1)
#define AD7793_FLAG_HAS_VBIAS BIT(2)
#define AD7793_HAS_EXITATION_CURRENT BIT(3)
#define AD7793_FLAG_HAS_GAIN BIT(4)
#define AD7793_FLAG_HAS_BUFFER BIT(5)
struct ad7793_chip_info {
unsigned int id;
const struct iio_chan_spec *channels;
unsigned int num_channels;
unsigned int flags;
const struct iio_info *iio_info;
const u16 *sample_freq_avail;
};
struct ad7793_state {
const struct ad7793_chip_info *chip_info;
struct regulator *reg;
u16 int_vref_mv;
u16 mode;
u16 conf;
u32 scale_avail[8][2];
struct ad_sigma_delta sd;
};
enum ad7793_supported_device_ids {
ID_AD7785,
ID_AD7792,
ID_AD7793,
ID_AD7794,
ID_AD7795,
ID_AD7796,
ID_AD7797,
ID_AD7798,
ID_AD7799,
};
static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd)
{
return container_of(sd, struct ad7793_state, sd);
}
static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
{
struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
st->conf &= ~AD7793_CONF_CHAN_MASK;
st->conf |= AD7793_CONF_CHAN(channel);
return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf);
}
static int ad7793_set_mode(struct ad_sigma_delta *sd,
enum ad_sigma_delta_mode mode)
{
struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
st->mode &= ~AD7793_MODE_SEL_MASK;
st->mode |= AD7793_MODE_SEL(mode);
return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode);
}
static const struct ad_sigma_delta_info ad7793_sigma_delta_info = {
.set_channel = ad7793_set_channel,
.set_mode = ad7793_set_mode,
.has_registers = true,
.addr_shift = 3,
.read_mask = BIT(6),
};
static const struct ad_sd_calib_data ad7793_calib_arr[6] = {
{AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M},
{AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M},
{AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M},
{AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M},
{AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M},
{AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M}
};
static int ad7793_calibrate_all(struct ad7793_state *st)
{
return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr,
ARRAY_SIZE(ad7793_calib_arr));
}
static int ad7793_check_platform_data(struct ad7793_state *st,
const struct ad7793_platform_data *pdata)
{
if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 ||
pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) &&
((pdata->exitation_current != AD7793_IX_10uA) &&
(pdata->exitation_current != AD7793_IX_210uA)))
return -EINVAL;
if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) &&
pdata->clock_src != AD7793_CLK_SRC_INT)
return -EINVAL;
if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) &&
pdata->refsel != AD7793_REFSEL_REFIN1)
return -EINVAL;
if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) &&
pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED)
return -EINVAL;
if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) &&
pdata->exitation_current != AD7793_IX_DISABLED)
return -EINVAL;
return 0;
}
static int ad7793_setup(struct iio_dev *indio_dev,
const struct ad7793_platform_data *pdata,
unsigned int vref_mv)
{
struct ad7793_state *st = iio_priv(indio_dev);
int i, ret;
unsigned long long scale_uv;
u32 id;
ret = ad7793_check_platform_data(st, pdata);
if (ret)
return ret;
/* reset the serial interface */
ret = ad_sd_reset(&st->sd, 32);
if (ret < 0)
goto out;
usleep_range(500, 2000); /* Wait for at least 500us */
/* write/read test for device presence */
ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id);
if (ret)
goto out;
id &= AD7793_ID_MASK;
if (id != st->chip_info->id) {
dev_err(&st->sd.spi->dev, "device ID query failed\n");
goto out;
}
st->mode = AD7793_MODE_RATE(1);
st->conf = 0;
if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL)
st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src);
if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL)
st->conf |= AD7793_CONF_REFSEL(pdata->refsel);
if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)
st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage);
if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER))
st->conf |= AD7793_CONF_BUF;
if (pdata->boost_enable &&
(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS))
st->conf |= AD7793_CONF_BOOST;
if (pdata->burnout_current)
st->conf |= AD7793_CONF_BO_EN;
if (pdata->unipolar)
st->conf |= AD7793_CONF_UNIPOLAR;
if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN))
st->conf |= AD7793_CONF_GAIN(7);
ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE);
if (ret)
goto out;
ret = ad7793_set_channel(&st->sd, 0);
if (ret)
goto out;
if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) {
ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1,
pdata->exitation_current |
(pdata->current_source_direction << 2));
if (ret)
goto out;
}
ret = ad7793_calibrate_all(st);
if (ret)
goto out;
/* Populate available ADC input ranges */
for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
scale_uv = ((u64)vref_mv * 100000000)
>> (st->chip_info->channels[0].scan_type.realbits -
(!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1));
scale_uv >>= i;
st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
st->scale_avail[i][0] = scale_uv;
}
return 0;
out:
dev_err(&st->sd.spi->dev, "setup failed\n");
return ret;
}
static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39,
33, 19, 17, 16, 12, 10, 8, 6, 4};
static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0,
33, 0, 17, 16, 12, 10, 8, 6, 4};
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
"470 242 123 62 50 39 33 19 17 16 12 10 8 6 4");
static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797,
sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4");
static ssize_t ad7793_show_scale_available(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad7793_state *st = iio_priv(indio_dev);
int i, len = 0;
for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
st->scale_avail[i][1]);
len += sprintf(buf + len, "\n");
return len;
}
static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available,
in_voltage-voltage_scale_available, S_IRUGO,
ad7793_show_scale_available, NULL, 0);
static struct attribute *ad7793_attributes[] = {
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
NULL
};
static const struct attribute_group ad7793_attribute_group = {
.attrs = ad7793_attributes,
};
static struct attribute *ad7797_attributes[] = {
&iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr,
NULL
};
static const struct attribute_group ad7797_attribute_group = {
.attrs = ad7797_attributes,
};
static int ad7793_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long m)
{
struct ad7793_state *st = iio_priv(indio_dev);
int ret;
unsigned long long scale_uv;
bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
switch (m) {
case IIO_CHAN_INFO_RAW:
ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
if (ret < 0)
return ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
if (chan->differential) {
*val = st->
scale_avail[(st->conf >> 8) & 0x7][0];
*val2 = st->
scale_avail[(st->conf >> 8) & 0x7][1];
return IIO_VAL_INT_PLUS_NANO;
}
/* 1170mV / 2^23 * 6 */
scale_uv = (1170ULL * 1000000000ULL * 6ULL);
break;
case IIO_TEMP:
/* 1170mV / 0.81 mV/C / 2^23 */
scale_uv = 1444444444444444ULL;
break;
default:
return -EINVAL;
}
scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1));
*val = 0;
*val2 = scale_uv;
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_OFFSET:
if (!unipolar)
*val = -(1 << (chan->scan_type.realbits - 1));
else
*val = 0;
/* Kelvin to Celsius */
if (chan->type == IIO_TEMP) {
unsigned long long offset;
unsigned int shift;
shift = chan->scan_type.realbits - (unipolar ? 0 : 1);
offset = 273ULL << shift;
do_div(offset, 1444);
*val -= offset;
}
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = st->chip_info
->sample_freq_avail[AD7793_MODE_RATE(st->mode)];
return IIO_VAL_INT;
}
return -EINVAL;
}
static int ad7793_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct ad7793_state *st = iio_priv(indio_dev);
int ret, i;
unsigned int tmp;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
if (val2 == st->scale_avail[i][1]) {
ret = 0;
tmp = st->conf;
st->conf &= ~AD7793_CONF_GAIN(-1);
st->conf |= AD7793_CONF_GAIN(i);
if (tmp == st->conf)
break;
ad_sd_write_reg(&st->sd, AD7793_REG_CONF,
sizeof(st->conf), st->conf);
ad7793_calibrate_all(st);
break;
}
break;
case IIO_CHAN_INFO_SAMP_FREQ:
if (!val) {
ret = -EINVAL;
break;
}
for (i = 0; i < 16; i++)
if (val == st->chip_info->sample_freq_avail[i])
break;
if (i == 16) {
ret = -EINVAL;
break;
}
st->mode &= ~AD7793_MODE_RATE(-1);
st->mode |= AD7793_MODE_RATE(i);
ad_sd_write_reg(&st->sd, AD7793_REG_MODE, sizeof(st->mode),
st->mode);
break;
default:
ret = -EINVAL;
}
iio_device_release_direct_mode(indio_dev);
return ret;
}
static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
long mask)
{
return IIO_VAL_INT_PLUS_NANO;
}
static const struct iio_info ad7793_info = {
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
.attrs = &ad7793_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
static const struct iio_info ad7797_info = {
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
.attrs = &ad7793_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
#define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \
const struct iio_chan_spec _name##_channels[] = { \
AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
AD_SD_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
AD_SD_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
IIO_CHAN_SOFT_TIMESTAMP(6), \
}
#define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \
const struct iio_chan_spec _name##_channels[] = { \
AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
AD_SD_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
AD_SD_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
AD_SD_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
IIO_CHAN_SOFT_TIMESTAMP(9), \
}
#define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \
const struct iio_chan_spec _name##_channels[] = { \
AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
AD_SD_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
AD_SD_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
AD_SD_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
IIO_CHAN_SOFT_TIMESTAMP(4), \
}
#define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \
const struct iio_chan_spec _name##_channels[] = { \
AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
AD_SD_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
IIO_CHAN_SOFT_TIMESTAMP(5), \
}
static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4);
static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0);
static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0);
static DECLARE_AD7795_CHANNELS(ad7794, 16, 32);
static DECLARE_AD7795_CHANNELS(ad7795, 24, 32);
static DECLARE_AD7797_CHANNELS(ad7796, 16, 16);
static DECLARE_AD7797_CHANNELS(ad7797, 24, 32);
static DECLARE_AD7799_CHANNELS(ad7798, 16, 16);
static DECLARE_AD7799_CHANNELS(ad7799, 24, 32);
static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
[ID_AD7785] = {
.id = AD7785_ID,
.channels = ad7785_channels,
.num_channels = ARRAY_SIZE(ad7785_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL |
AD7793_FLAG_HAS_REFSEL |
AD7793_FLAG_HAS_VBIAS |
AD7793_HAS_EXITATION_CURRENT |
AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
[ID_AD7792] = {
.id = AD7792_ID,
.channels = ad7792_channels,
.num_channels = ARRAY_SIZE(ad7792_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL |
AD7793_FLAG_HAS_REFSEL |
AD7793_FLAG_HAS_VBIAS |
AD7793_HAS_EXITATION_CURRENT |
AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
[ID_AD7793] = {
.id = AD7793_ID,
.channels = ad7793_channels,
.num_channels = ARRAY_SIZE(ad7793_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL |
AD7793_FLAG_HAS_REFSEL |
AD7793_FLAG_HAS_VBIAS |
AD7793_HAS_EXITATION_CURRENT |
AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
[ID_AD7794] = {
.id = AD7794_ID,
.channels = ad7794_channels,
.num_channels = ARRAY_SIZE(ad7794_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL |
AD7793_FLAG_HAS_REFSEL |
AD7793_FLAG_HAS_VBIAS |
AD7793_HAS_EXITATION_CURRENT |
AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
[ID_AD7795] = {
.id = AD7795_ID,
.channels = ad7795_channels,
.num_channels = ARRAY_SIZE(ad7795_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL |
AD7793_FLAG_HAS_REFSEL |
AD7793_FLAG_HAS_VBIAS |
AD7793_HAS_EXITATION_CURRENT |
AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
[ID_AD7796] = {
.id = AD7796_ID,
.channels = ad7796_channels,
.num_channels = ARRAY_SIZE(ad7796_channels),
.iio_info = &ad7797_info,
.sample_freq_avail = ad7797_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL,
},
[ID_AD7797] = {
.id = AD7797_ID,
.channels = ad7797_channels,
.num_channels = ARRAY_SIZE(ad7797_channels),
.iio_info = &ad7797_info,
.sample_freq_avail = ad7797_sample_freq_avail,
.flags = AD7793_FLAG_HAS_CLKSEL,
},
[ID_AD7798] = {
.id = AD7798_ID,
.channels = ad7798_channels,
.num_channels = ARRAY_SIZE(ad7798_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
[ID_AD7799] = {
.id = AD7799_ID,
.channels = ad7799_channels,
.num_channels = ARRAY_SIZE(ad7799_channels),
.iio_info = &ad7793_info,
.sample_freq_avail = ad7793_sample_freq_avail,
.flags = AD7793_FLAG_HAS_GAIN |
AD7793_FLAG_HAS_BUFFER,
},
};
static int ad7793_probe(struct spi_device *spi)
{
const struct ad7793_platform_data *pdata = spi->dev.platform_data;
struct ad7793_state *st;
struct iio_dev *indio_dev;
int ret, vref_mv = 0;
if (!pdata) {
dev_err(&spi->dev, "no platform data?\n");
return -ENODEV;
}
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ?\n");
return -ENODEV;
}
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (indio_dev == NULL)
return -ENOMEM;
st = iio_priv(indio_dev);
ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info);
if (pdata->refsel != AD7793_REFSEL_INTERNAL) {
st->reg = devm_regulator_get(&spi->dev, "refin");
if (IS_ERR(st->reg))
return PTR_ERR(st->reg);
ret = regulator_enable(st->reg);
if (ret)
return ret;
vref_mv = regulator_get_voltage(st->reg);
if (vref_mv < 0) {
ret = vref_mv;
goto error_disable_reg;
}
vref_mv /= 1000;
} else {
vref_mv = 1170; /* Build-in ref */
}
st->chip_info =
&ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data];
spi_set_drvdata(spi, indio_dev);
indio_dev->dev.parent = &spi->dev;
indio_dev->dev.of_node = spi->dev.of_node;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = st->chip_info->channels;
indio_dev->num_channels = st->chip_info->num_channels;
indio_dev->info = st->chip_info->iio_info;
ret = ad_sd_setup_buffer_and_trigger(indio_dev);
if (ret)
goto error_disable_reg;
ret = ad7793_setup(indio_dev, pdata, vref_mv);
if (ret)
goto error_remove_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_remove_trigger;
return 0;
error_remove_trigger:
ad_sd_cleanup_buffer_and_trigger(indio_dev);
error_disable_reg:
if (pdata->refsel != AD7793_REFSEL_INTERNAL)
regulator_disable(st->reg);
return ret;
}
static int ad7793_remove(struct spi_device *spi)
{
const struct ad7793_platform_data *pdata = spi->dev.platform_data;
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad7793_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
ad_sd_cleanup_buffer_and_trigger(indio_dev);
if (pdata->refsel != AD7793_REFSEL_INTERNAL)
regulator_disable(st->reg);
return 0;
}
static const struct spi_device_id ad7793_id[] = {
{"ad7785", ID_AD7785},
{"ad7792", ID_AD7792},
{"ad7793", ID_AD7793},
{"ad7794", ID_AD7794},
{"ad7795", ID_AD7795},
{"ad7796", ID_AD7796},
{"ad7797", ID_AD7797},
{"ad7798", ID_AD7798},
{"ad7799", ID_AD7799},
{}
};
MODULE_DEVICE_TABLE(spi, ad7793_id);
static struct spi_driver ad7793_driver = {
.driver = {
.name = "ad7793",
},
.probe = ad7793_probe,
.remove = ad7793_remove,
.id_table = ad7793_id,
};
module_spi_driver(ad7793_driver);
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD7793 and similar ADCs");
MODULE_LICENSE("GPL v2");