swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: 92ed301919932f777713b9172e525674157e983d authored by Linus Torvalds on 26 July 2020, 21:14:06 UTC
Linux 5.8-rc7
Linux 5.8-rc7
Tip revision: 92ed301
sdhci.h
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
*
* Header file for Host Controller registers and I/O accessors.
*
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
*/
#ifndef __SDHCI_HW_H
#define __SDHCI_HW_H
#include <linux/bits.h>
#include <linux/scatterlist.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
/*
* Controller registers
*/
#define SDHCI_DMA_ADDRESS 0x00
#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS
#define SDHCI_BLOCK_SIZE 0x04
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
#define SDHCI_BLOCK_COUNT 0x06
#define SDHCI_ARGUMENT 0x08
#define SDHCI_TRANSFER_MODE 0x0C
#define SDHCI_TRNS_DMA 0x01
#define SDHCI_TRNS_BLK_CNT_EN 0x02
#define SDHCI_TRNS_AUTO_CMD12 0x04
#define SDHCI_TRNS_AUTO_CMD23 0x08
#define SDHCI_TRNS_AUTO_SEL 0x0C
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
#define SDHCI_COMMAND 0x0E
#define SDHCI_CMD_RESP_MASK 0x03
#define SDHCI_CMD_CRC 0x08
#define SDHCI_CMD_INDEX 0x10
#define SDHCI_CMD_DATA 0x20
#define SDHCI_CMD_ABORTCMD 0xC0
#define SDHCI_CMD_RESP_NONE 0x00
#define SDHCI_CMD_RESP_LONG 0x01
#define SDHCI_CMD_RESP_SHORT 0x02
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
#define SDHCI_RESPONSE 0x10
#define SDHCI_BUFFER 0x20
#define SDHCI_PRESENT_STATE 0x24
#define SDHCI_CMD_INHIBIT 0x00000001
#define SDHCI_DATA_INHIBIT 0x00000002
#define SDHCI_DOING_WRITE 0x00000100
#define SDHCI_DOING_READ 0x00000200
#define SDHCI_SPACE_AVAILABLE 0x00000400
#define SDHCI_DATA_AVAILABLE 0x00000800
#define SDHCI_CARD_PRESENT 0x00010000
#define SDHCI_CARD_PRES_SHIFT 16
#define SDHCI_CD_STABLE 0x00020000
#define SDHCI_CD_LVL 0x00040000
#define SDHCI_CD_LVL_SHIFT 18
#define SDHCI_WRITE_PROTECT 0x00080000
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
#define SDHCI_DATA_0_LVL_MASK 0x00100000
#define SDHCI_CMD_LVL 0x01000000
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_CTRL_HISPD 0x04
#define SDHCI_CTRL_DMA_MASK 0x18
#define SDHCI_CTRL_SDMA 0x00
#define SDHCI_CTRL_ADMA1 0x08
#define SDHCI_CTRL_ADMA32 0x10
#define SDHCI_CTRL_ADMA64 0x18
#define SDHCI_CTRL_ADMA3 0x18
#define SDHCI_CTRL_8BITBUS 0x20
#define SDHCI_CTRL_CDTEST_INS 0x40
#define SDHCI_CTRL_CDTEST_EN 0x80
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
#define SDHCI_POWER_180 0x0A
#define SDHCI_POWER_300 0x0C
#define SDHCI_POWER_330 0x0E
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
#define SDHCI_WAKE_UP_CONTROL 0x2B
#define SDHCI_WAKE_ON_INT 0x01
#define SDHCI_WAKE_ON_INSERT 0x02
#define SDHCI_WAKE_ON_REMOVE 0x04
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_SHIFT 8
#define SDHCI_DIVIDER_HI_SHIFT 6
#define SDHCI_DIV_MASK 0xFF
#define SDHCI_DIV_MASK_LEN 8
#define SDHCI_DIV_HI_MASK 0x300
#define SDHCI_PROG_CLOCK_MODE 0x0020
#define SDHCI_CLOCK_CARD_EN 0x0004
#define SDHCI_CLOCK_PLL_EN 0x0008
#define SDHCI_CLOCK_INT_STABLE 0x0002
#define SDHCI_CLOCK_INT_EN 0x0001
#define SDHCI_TIMEOUT_CONTROL 0x2E
#define SDHCI_SOFTWARE_RESET 0x2F
#define SDHCI_RESET_ALL 0x01
#define SDHCI_RESET_CMD 0x02
#define SDHCI_RESET_DATA 0x04
#define SDHCI_INT_STATUS 0x30
#define SDHCI_INT_ENABLE 0x34
#define SDHCI_SIGNAL_ENABLE 0x38
#define SDHCI_INT_RESPONSE 0x00000001
#define SDHCI_INT_DATA_END 0x00000002
#define SDHCI_INT_BLK_GAP 0x00000004
#define SDHCI_INT_DMA_END 0x00000008
#define SDHCI_INT_SPACE_AVAIL 0x00000010
#define SDHCI_INT_DATA_AVAIL 0x00000020
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
#define SDHCI_INT_RETUNE 0x00001000
#define SDHCI_INT_CQE 0x00004000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
#define SDHCI_INT_CRC 0x00020000
#define SDHCI_INT_END_BIT 0x00040000
#define SDHCI_INT_INDEX 0x00080000
#define SDHCI_INT_DATA_TIMEOUT 0x00100000
#define SDHCI_INT_DATA_CRC 0x00200000
#define SDHCI_INT_DATA_END_BIT 0x00400000
#define SDHCI_INT_BUS_POWER 0x00800000
#define SDHCI_INT_AUTO_CMD_ERR 0x01000000
#define SDHCI_INT_ADMA_ERROR 0x02000000
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
SDHCI_INT_AUTO_CMD_ERR)
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
SDHCI_INT_BLK_GAP)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_CQE_INT_ERR_MASK ( \
SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \
SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \
SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)
#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
#define SDHCI_AUTO_CMD_STATUS 0x3C
#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002
#define SDHCI_AUTO_CMD_CRC 0x00000004
#define SDHCI_AUTO_CMD_END_BIT 0x00000008
#define SDHCI_AUTO_CMD_INDEX 0x00000010
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_UHS_MASK 0x0007
#define SDHCI_CTRL_UHS_SDR12 0x0000
#define SDHCI_CTRL_UHS_SDR25 0x0001
#define SDHCI_CTRL_UHS_SDR50 0x0002
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
#define SDHCI_CTRL_DRV_TYPE_A 0x0010
#define SDHCI_CTRL_DRV_TYPE_C 0x0020
#define SDHCI_CTRL_DRV_TYPE_D 0x0030
#define SDHCI_CTRL_EXEC_TUNING 0x0040
#define SDHCI_CTRL_TUNED_CLK 0x0080
#define SDHCI_CMD23_ENABLE 0x0800
#define SDHCI_CTRL_V4_MODE 0x1000
#define SDHCI_CTRL_64BIT_ADDR 0x2000
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0)
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8)
#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8)
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
#define SDHCI_CAN_DO_8BIT 0x00040000
#define SDHCI_CAN_DO_ADMA2 0x00080000
#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
#define SDHCI_CAN_DO_SDMA 0x00400000
#define SDHCI_CAN_DO_SUSPEND 0x00800000
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
#define SDHCI_CAN_64BIT_V4 0x08000000
#define SDHCI_CAN_64BIT 0x10000000
#define SDHCI_CAPABILITIES_1 0x44
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
#define SDHCI_DRIVER_TYPE_A 0x00000010
#define SDHCI_DRIVER_TYPE_C 0x00000020
#define SDHCI_DRIVER_TYPE_D 0x00000040
#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
#define SDHCI_USE_SDR50_TUNING 0x00002000
#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
#define SDHCI_CAN_DO_ADMA3 0x08000000
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_MAX_CURRENT 0x48
#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0)
#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0)
#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8)
#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16)
#define SDHCI_MAX_CURRENT_MULTIPLIER 4
/* 4C-4F reserved for more max current */
#define SDHCI_SET_ACMD12_ERROR 0x50
#define SDHCI_SET_INT_ERROR 0x52
#define SDHCI_ADMA_ERROR 0x54
/* 55-57 reserved */
#define SDHCI_ADMA_ADDRESS 0x58
#define SDHCI_ADMA_ADDRESS_HI 0x5C
/* 60-FB reserved */
#define SDHCI_PRESET_FOR_SDR12 0x66
#define SDHCI_PRESET_FOR_SDR25 0x68
#define SDHCI_PRESET_FOR_SDR50 0x6A
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14)
#define SDHCI_PRESET_CLKGEN_SEL BIT(10)
#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0)
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
#define SDHCI_VENDOR_VER_MASK 0xFF00
#define SDHCI_VENDOR_VER_SHIFT 8
#define SDHCI_SPEC_VER_MASK 0x00FF
#define SDHCI_SPEC_VER_SHIFT 0
#define SDHCI_SPEC_100 0
#define SDHCI_SPEC_200 1
#define SDHCI_SPEC_300 2
#define SDHCI_SPEC_400 3
#define SDHCI_SPEC_410 4
#define SDHCI_SPEC_420 5
/*
* End of controller registers.
*/
#define SDHCI_MAX_DIV_SPEC_200 256
#define SDHCI_MAX_DIV_SPEC_300 2046
/*
* Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
*/
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
/* ADMA2 32-bit DMA descriptor size */
#define SDHCI_ADMA2_32_DESC_SZ 8
/* ADMA2 32-bit descriptor */
struct sdhci_adma2_32_desc {
__le16 cmd;
__le16 len;
__le32 addr;
} __packed __aligned(4);
/* ADMA2 data alignment */
#define SDHCI_ADMA2_ALIGN 4
#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
/*
* ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
* alignment for the descriptor table even in 32-bit DMA mode. Memory
* allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
*/
#define SDHCI_ADMA2_DESC_ALIGN 8
/*
* ADMA2 64-bit DMA descriptor size
* According to SD Host Controller spec v4.10, there are two kinds of
* descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit
* Descriptor, if Host Version 4 Enable is set in the Host Control 2
* register, 128-bit Descriptor will be selected.
*/
#define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12)
/*
* ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
* aligned.
*/
struct sdhci_adma2_64_desc {
__le16 cmd;
__le16 len;
__le32 addr_lo;
__le32 addr_hi;
} __packed __aligned(4);
#define ADMA2_TRAN_VALID 0x21
#define ADMA2_NOP_END_VALID 0x3
#define ADMA2_END 0x2
/*
* Maximum segments assuming a 512KiB maximum requisition size and a minimum
* 4KiB page size.
*/
#define SDHCI_MAX_SEGS 128
/* Allow for a a command request and a data request at the same time */
#define SDHCI_MAX_MRQS 2
/*
* 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms.
* However since the start time of the command, the time between
* command and response, and the time between response and start of data is
* not known, set the command transfer time to 10ms.
*/
#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */
enum sdhci_cookie {
COOKIE_UNMAPPED,
COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */
};
struct sdhci_host {
/* Data set by hardware interface driver */
const char *hw_name; /* Hardware bus name */
unsigned int quirks; /* Deviations from spec. */
/* Controller doesn't honor resets unless we touch the clock register */
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
/* Controller has bad caps bits, but really supports DMA */
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
/* Controller doesn't like to be reset when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
/* Controller doesn't like clearing the power reg before a change */
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
/* Controller has flaky internal state so reset it on each ios change */
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
/* Controller has an unusable DMA engine */
#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
/* Controller has an unusable ADMA engine */
#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
/* Controller can only DMA from 32-bit aligned addresses */
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
/* Controller can only ADMA chunks that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
/* Controller needs voltage and power writes to happen separately */
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
/* Controller provides an incorrect timeout value for transfers */
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
/* Controller has unreliable card detection */
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
/* Controller has unusable command queue engine */
#define SDHCI_QUIRK_BROKEN_CQE (1<<17)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
/* Controller does not have a LED */
#define SDHCI_QUIRK_NO_LED (1<<19)
/* Controller has to be forced to use block size of 2048 bytes */
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
/* Controller cannot do multi-block transfers */
#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
/* Controller can only handle 1-bit data transfers */
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
/* Controller needs 10ms delay between applying power and clock */
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
/* Controller uses SDCLK instead of TMCLK for data timeouts */
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
/* Controller reports wrong base clock capability */
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
/* Controller is missing device caps. Use caps provided by host */
#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
/* Controller uses Auto CMD12 command to stop the transfer */
#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
/* Controller treats ADMA descriptors with length 0000h incorrectly */
#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
unsigned int quirks2; /* More deviations from spec. */
#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
/* The system physically doesn't support 1.8v, even if the host does */
#define SDHCI_QUIRK2_NO_1_8_V (1<<2)
#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
/* Controller has a non-standard host control register */
#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
/* Controller does not support HS200 */
#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
/* Controller does not support DDR50 */
#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
/* Controller does not support 64-bit DMA */
#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
/* need clear transfer mode register before send cmd */
#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
/* Capability register bit-63 indicates HS400 support */
#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
/* forced tuned clock */
#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
/* disable the block count for single block transactions */
#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
/* Controller broken with using ACMD23 */
#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
/* Broken Clock divider zero in controller */
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
/* Controller has CRC in 136 bit Command Response */
#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
/*
* Disable HW timeout if the requested timeout is more than the maximum
* obtainable timeout.
*/
#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
/*
* 32-bit block count may not support eMMC where upper bits of CMD23 are used
* for other purposes. Consequently we support 16-bit block count by default.
* Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
phys_addr_t mapbase; /* physical address base */
char *bounce_buffer; /* For packing SDMA reads/writes */
dma_addr_t bounce_addr;
unsigned int bounce_buffer_size;
const struct sdhci_ops *ops; /* Low level hw interface */
/* Internal data */
struct mmc_host *mmc; /* MMC structure */
struct mmc_host_ops mmc_host_ops; /* MMC host ops */
u64 dma_mask; /* custom DMA mask */
#if IS_ENABLED(CONFIG_LEDS_CLASS)
struct led_classdev led; /* LED control */
char led_name[32];
#endif
spinlock_t lock; /* Mutex */
int flags; /* Host attributes */
#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
unsigned int version; /* SDHCI spec. version */
unsigned int max_clk; /* Max possible freq (MHz) */
unsigned int timeout_clk; /* Timeout freq (KHz) */
unsigned int clk_mul; /* Clock Muliplier value */
unsigned int clock; /* Current clock (MHz) */
u8 pwr; /* Current voltage */
bool runtime_suspended; /* Host is runtime suspended */
bool bus_on; /* Bus power prevents runtime suspend */
bool preset_enabled; /* Preset is enabled */
bool pending_reset; /* Cmd/data reset is pending */
bool irq_wake_enabled; /* IRQ wakeup is enabled */
bool v4_mode; /* Host Version 4 Enable */
bool use_external_dma; /* Host selects to use external DMA */
bool always_defer_done; /* Always defer to complete requests */
struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
struct mmc_command *cmd; /* Current command */
struct mmc_command *data_cmd; /* Current data command */
struct mmc_command *deferred_cmd; /* Deferred command */
struct mmc_data *data; /* Current data request */
unsigned int data_early:1; /* Data finished before cmd */
struct sg_mapping_iter sg_miter; /* SG state for PIO */
unsigned int blocks; /* remaining PIO blocks */
int sg_count; /* Mapped sg entries */
void *adma_table; /* ADMA descriptor table */
void *align_buffer; /* Bounce buffer */
size_t adma_table_sz; /* ADMA descriptor table size */
size_t align_buffer_sz; /* Bounce buffer size */
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
unsigned int desc_sz; /* ADMA current descriptor size */
unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */
struct workqueue_struct *complete_wq; /* Request completion wq */
struct work_struct complete_work; /* Request completion work */
struct timer_list timer; /* Timer for timeouts */
struct timer_list data_timer; /* Timer for data timeouts */
#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
struct dma_chan *rx_chan;
struct dma_chan *tx_chan;
#endif
u32 caps; /* CAPABILITY_0 */
u32 caps1; /* CAPABILITY_1 */
bool read_caps; /* Capability flags have been read */
unsigned int ocr_avail_sdio; /* OCR bit masks */
unsigned int ocr_avail_sd;
unsigned int ocr_avail_mmc;
u32 ocr_mask; /* available voltages */
unsigned timing; /* Current timing */
u32 thread_isr;
/* cached registers */
u32 ier;
bool cqe_on; /* CQE is operating */
u32 cqe_ier; /* CQE interrupt mask */
u32 cqe_err_ier; /* CQE error interrupt mask */
wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
unsigned int tuning_count; /* Timer count for re-tuning */
unsigned int tuning_mode; /* Re-tuning mode supported by host */
unsigned int tuning_err; /* Error code for re-tuning */
#define SDHCI_TUNING_MODE_1 0
#define SDHCI_TUNING_MODE_2 1
#define SDHCI_TUNING_MODE_3 2
/* Delay (ms) between tuning commands */
int tuning_delay;
int tuning_loop_count;
/* Host SDMA buffer boundary. */
u32 sdma_boundary;
/* Host ADMA table count */
u32 adma_table_cnt;
u64 data_timeout;
unsigned long private[] ____cacheline_aligned;
};
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
u32 (*read_l)(struct sdhci_host *host, int reg);
u16 (*read_w)(struct sdhci_host *host, int reg);
u8 (*read_b)(struct sdhci_host *host, int reg);
void (*write_l)(struct sdhci_host *host, u32 val, int reg);
void (*write_w)(struct sdhci_host *host, u16 val, int reg);
void (*write_b)(struct sdhci_host *host, u8 val, int reg);
#endif
void (*set_clock)(struct sdhci_host *host, unsigned int clock);
void (*set_power)(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
u32 (*irq)(struct sdhci_host *host, u32 intmask);
int (*set_dma_mask)(struct sdhci_host *host);
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_min_clock)(struct sdhci_host *host);
/* get_timeout_clock should return clk rate in unit of Hz */
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
void (*set_timeout)(struct sdhci_host *host,
struct mmc_command *cmd);
void (*set_bus_width)(struct sdhci_host *host, int width);
void (*platform_send_init_74_clocks)(struct sdhci_host *host,
u8 power_mode);
unsigned int (*get_ro)(struct sdhci_host *host);
void (*reset)(struct sdhci_host *host, u8 mask);
int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
void (*hw_reset)(struct sdhci_host *host);
void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
void (*card_event)(struct sdhci_host *host);
void (*voltage_switch)(struct sdhci_host *host);
void (*adma_write_desc)(struct sdhci_host *host, void **desc,
dma_addr_t addr, int len, unsigned int cmd);
void (*copy_to_bounce_buffer)(struct sdhci_host *host,
struct mmc_data *data,
unsigned int length);
void (*request_done)(struct sdhci_host *host,
struct mmc_request *mrq);
void (*dump_vendor_regs)(struct sdhci_host *host);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
if (unlikely(host->ops->write_l))
host->ops->write_l(host, val, reg);
else
writel(val, host->ioaddr + reg);
}
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
if (unlikely(host->ops->write_w))
host->ops->write_w(host, val, reg);
else
writew(val, host->ioaddr + reg);
}
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
if (unlikely(host->ops->write_b))
host->ops->write_b(host, val, reg);
else
writeb(val, host->ioaddr + reg);
}
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
if (unlikely(host->ops->read_l))
return host->ops->read_l(host, reg);
else
return readl(host->ioaddr + reg);
}
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
if (unlikely(host->ops->read_w))
return host->ops->read_w(host, reg);
else
return readw(host->ioaddr + reg);
}
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
if (unlikely(host->ops->read_b))
return host->ops->read_b(host, reg);
else
return readb(host->ioaddr + reg);
}
#else
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
writel(val, host->ioaddr + reg);
}
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
writew(val, host->ioaddr + reg);
}
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
writeb(val, host->ioaddr + reg);
}
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
return readl(host->ioaddr + reg);
}
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
return readw(host->ioaddr + reg);
}
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
return readb(host->ioaddr + reg);
}
#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size);
void sdhci_free_host(struct sdhci_host *host);
static inline void *sdhci_priv(struct sdhci_host *host)
{
return host->private;
}
void sdhci_card_detect(struct sdhci_host *host);
void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,
const u32 *caps, const u32 *caps1);
int sdhci_setup_host(struct sdhci_host *host);
void sdhci_cleanup_host(struct sdhci_host *host);
int __sdhci_add_host(struct sdhci_host *host);
int sdhci_add_host(struct sdhci_host *host);
void sdhci_remove_host(struct sdhci_host *host, int dead);
static inline void sdhci_read_caps(struct sdhci_host *host)
{
__sdhci_read_caps(host, NULL, NULL, NULL);
}
u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
unsigned int *actual_clock);
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
unsigned char mode,
unsigned short vdd);
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
void sdhci_reset(struct sdhci_host *host, u8 mask);
void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
struct mmc_ios *ios);
void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
dma_addr_t addr, int len, unsigned int cmd);
#ifdef CONFIG_PM
int sdhci_suspend_host(struct sdhci_host *host);
int sdhci_resume_host(struct sdhci_host *host);
int sdhci_runtime_suspend_host(struct sdhci_host *host);
int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset);
#endif
void sdhci_cqe_enable(struct mmc_host *mmc);
void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
int *data_error);
void sdhci_dumpregs(struct sdhci_host *host);
void sdhci_enable_v4_mode(struct sdhci_host *host);
void sdhci_start_tuning(struct sdhci_host *host);
void sdhci_end_tuning(struct sdhci_host *host);
void sdhci_reset_tuning(struct sdhci_host *host);
void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
void sdhci_switch_external_dma(struct sdhci_host *host, bool en);
void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable);
void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
#endif /* __SDHCI_HW_H */