swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: fa8410b355251fd30341662a40ac6b22d3e38468 authored by Linus Torvalds on 21 August 2016, 23:14:10 UTC
Linux 4.8-rc3
Linux 4.8-rc3
Tip revision: fa8410b
zcrypt_msgtype50.c
/*
* zcrypt 2.1.0
*
* Copyright IBM Corp. 2001, 2012
* Author(s): Robert Burroughs
* Eric Rossman (edrossma@us.ibm.com)
*
* Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
* Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Ralph Wuerthner <rwuerthn@de.ibm.com>
* MSGTYPE restruct: Holger Dengler <hd@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define KMSG_COMPONENT "zcrypt"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/atomic.h>
#include <linux/uaccess.h>
#include "ap_bus.h"
#include "zcrypt_api.h"
#include "zcrypt_error.h"
#include "zcrypt_msgtype50.h"
#define CEX3A_MAX_MOD_SIZE 512 /* 4096 bits */
#define CEX2A_MAX_RESPONSE_SIZE 0x110 /* max outputdatalength + type80_hdr */
#define CEX3A_MAX_RESPONSE_SIZE 0x210 /* 512 bit modulus
* (max outputdatalength) +
* type80_hdr*/
MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("Cryptographic Accelerator (message type 50), " \
"Copyright IBM Corp. 2001, 2012");
MODULE_LICENSE("GPL");
static void zcrypt_cex2a_receive(struct ap_device *, struct ap_message *,
struct ap_message *);
/**
* The type 50 message family is associated with a CEX2A card.
*
* The four members of the family are described below.
*
* Note that all unsigned char arrays are right-justified and left-padded
* with zeroes.
*
* Note that all reserved fields must be zeroes.
*/
struct type50_hdr {
unsigned char reserved1;
unsigned char msg_type_code; /* 0x50 */
unsigned short msg_len;
unsigned char reserved2;
unsigned char ignored;
unsigned short reserved3;
} __packed;
#define TYPE50_TYPE_CODE 0x50
#define TYPE50_MEB1_FMT 0x0001
#define TYPE50_MEB2_FMT 0x0002
#define TYPE50_MEB3_FMT 0x0003
#define TYPE50_CRB1_FMT 0x0011
#define TYPE50_CRB2_FMT 0x0012
#define TYPE50_CRB3_FMT 0x0013
/* Mod-Exp, with a small modulus */
struct type50_meb1_msg {
struct type50_hdr header;
unsigned short keyblock_type; /* 0x0001 */
unsigned char reserved[6];
unsigned char exponent[128];
unsigned char modulus[128];
unsigned char message[128];
} __packed;
/* Mod-Exp, with a large modulus */
struct type50_meb2_msg {
struct type50_hdr header;
unsigned short keyblock_type; /* 0x0002 */
unsigned char reserved[6];
unsigned char exponent[256];
unsigned char modulus[256];
unsigned char message[256];
} __packed;
/* Mod-Exp, with a larger modulus */
struct type50_meb3_msg {
struct type50_hdr header;
unsigned short keyblock_type; /* 0x0003 */
unsigned char reserved[6];
unsigned char exponent[512];
unsigned char modulus[512];
unsigned char message[512];
} __packed;
/* CRT, with a small modulus */
struct type50_crb1_msg {
struct type50_hdr header;
unsigned short keyblock_type; /* 0x0011 */
unsigned char reserved[6];
unsigned char p[64];
unsigned char q[64];
unsigned char dp[64];
unsigned char dq[64];
unsigned char u[64];
unsigned char message[128];
} __packed;
/* CRT, with a large modulus */
struct type50_crb2_msg {
struct type50_hdr header;
unsigned short keyblock_type; /* 0x0012 */
unsigned char reserved[6];
unsigned char p[128];
unsigned char q[128];
unsigned char dp[128];
unsigned char dq[128];
unsigned char u[128];
unsigned char message[256];
} __packed;
/* CRT, with a larger modulus */
struct type50_crb3_msg {
struct type50_hdr header;
unsigned short keyblock_type; /* 0x0013 */
unsigned char reserved[6];
unsigned char p[256];
unsigned char q[256];
unsigned char dp[256];
unsigned char dq[256];
unsigned char u[256];
unsigned char message[512];
} __packed;
/**
* The type 80 response family is associated with a CEX2A card.
*
* Note that all unsigned char arrays are right-justified and left-padded
* with zeroes.
*
* Note that all reserved fields must be zeroes.
*/
#define TYPE80_RSP_CODE 0x80
struct type80_hdr {
unsigned char reserved1;
unsigned char type; /* 0x80 */
unsigned short len;
unsigned char code; /* 0x00 */
unsigned char reserved2[3];
unsigned char reserved3[8];
} __packed;
/**
* Convert a ICAMEX message to a type50 MEX message.
*
* @zdev: crypto device pointer
* @zreq: crypto request pointer
* @mex: pointer to user input data
*
* Returns 0 on success or -EFAULT.
*/
static int ICAMEX_msg_to_type50MEX_msg(struct zcrypt_device *zdev,
struct ap_message *ap_msg,
struct ica_rsa_modexpo *mex)
{
unsigned char *mod, *exp, *inp;
int mod_len;
mod_len = mex->inputdatalength;
if (mod_len <= 128) {
struct type50_meb1_msg *meb1 = ap_msg->message;
memset(meb1, 0, sizeof(*meb1));
ap_msg->length = sizeof(*meb1);
meb1->header.msg_type_code = TYPE50_TYPE_CODE;
meb1->header.msg_len = sizeof(*meb1);
meb1->keyblock_type = TYPE50_MEB1_FMT;
mod = meb1->modulus + sizeof(meb1->modulus) - mod_len;
exp = meb1->exponent + sizeof(meb1->exponent) - mod_len;
inp = meb1->message + sizeof(meb1->message) - mod_len;
} else if (mod_len <= 256) {
struct type50_meb2_msg *meb2 = ap_msg->message;
memset(meb2, 0, sizeof(*meb2));
ap_msg->length = sizeof(*meb2);
meb2->header.msg_type_code = TYPE50_TYPE_CODE;
meb2->header.msg_len = sizeof(*meb2);
meb2->keyblock_type = TYPE50_MEB2_FMT;
mod = meb2->modulus + sizeof(meb2->modulus) - mod_len;
exp = meb2->exponent + sizeof(meb2->exponent) - mod_len;
inp = meb2->message + sizeof(meb2->message) - mod_len;
} else {
/* mod_len > 256 = 4096 bit RSA Key */
struct type50_meb3_msg *meb3 = ap_msg->message;
memset(meb3, 0, sizeof(*meb3));
ap_msg->length = sizeof(*meb3);
meb3->header.msg_type_code = TYPE50_TYPE_CODE;
meb3->header.msg_len = sizeof(*meb3);
meb3->keyblock_type = TYPE50_MEB3_FMT;
mod = meb3->modulus + sizeof(meb3->modulus) - mod_len;
exp = meb3->exponent + sizeof(meb3->exponent) - mod_len;
inp = meb3->message + sizeof(meb3->message) - mod_len;
}
if (copy_from_user(mod, mex->n_modulus, mod_len) ||
copy_from_user(exp, mex->b_key, mod_len) ||
copy_from_user(inp, mex->inputdata, mod_len))
return -EFAULT;
return 0;
}
/**
* Convert a ICACRT message to a type50 CRT message.
*
* @zdev: crypto device pointer
* @zreq: crypto request pointer
* @crt: pointer to user input data
*
* Returns 0 on success or -EFAULT.
*/
static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
struct ap_message *ap_msg,
struct ica_rsa_modexpo_crt *crt)
{
int mod_len, short_len;
unsigned char *p, *q, *dp, *dq, *u, *inp;
mod_len = crt->inputdatalength;
short_len = (mod_len + 1) / 2;
/*
* CEX2A and CEX3A w/o FW update can handle requests up to
* 256 byte modulus (2k keys).
* CEX3A with FW update and CEX4A cards are able to handle
* 512 byte modulus (4k keys).
*/
if (mod_len <= 128) { /* up to 1024 bit key size */
struct type50_crb1_msg *crb1 = ap_msg->message;
memset(crb1, 0, sizeof(*crb1));
ap_msg->length = sizeof(*crb1);
crb1->header.msg_type_code = TYPE50_TYPE_CODE;
crb1->header.msg_len = sizeof(*crb1);
crb1->keyblock_type = TYPE50_CRB1_FMT;
p = crb1->p + sizeof(crb1->p) - short_len;
q = crb1->q + sizeof(crb1->q) - short_len;
dp = crb1->dp + sizeof(crb1->dp) - short_len;
dq = crb1->dq + sizeof(crb1->dq) - short_len;
u = crb1->u + sizeof(crb1->u) - short_len;
inp = crb1->message + sizeof(crb1->message) - mod_len;
} else if (mod_len <= 256) { /* up to 2048 bit key size */
struct type50_crb2_msg *crb2 = ap_msg->message;
memset(crb2, 0, sizeof(*crb2));
ap_msg->length = sizeof(*crb2);
crb2->header.msg_type_code = TYPE50_TYPE_CODE;
crb2->header.msg_len = sizeof(*crb2);
crb2->keyblock_type = TYPE50_CRB2_FMT;
p = crb2->p + sizeof(crb2->p) - short_len;
q = crb2->q + sizeof(crb2->q) - short_len;
dp = crb2->dp + sizeof(crb2->dp) - short_len;
dq = crb2->dq + sizeof(crb2->dq) - short_len;
u = crb2->u + sizeof(crb2->u) - short_len;
inp = crb2->message + sizeof(crb2->message) - mod_len;
} else if ((mod_len <= 512) && /* up to 4096 bit key size */
(zdev->max_mod_size == CEX3A_MAX_MOD_SIZE)) { /* >= CEX3A */
struct type50_crb3_msg *crb3 = ap_msg->message;
memset(crb3, 0, sizeof(*crb3));
ap_msg->length = sizeof(*crb3);
crb3->header.msg_type_code = TYPE50_TYPE_CODE;
crb3->header.msg_len = sizeof(*crb3);
crb3->keyblock_type = TYPE50_CRB3_FMT;
p = crb3->p + sizeof(crb3->p) - short_len;
q = crb3->q + sizeof(crb3->q) - short_len;
dp = crb3->dp + sizeof(crb3->dp) - short_len;
dq = crb3->dq + sizeof(crb3->dq) - short_len;
u = crb3->u + sizeof(crb3->u) - short_len;
inp = crb3->message + sizeof(crb3->message) - mod_len;
} else
return -EINVAL;
/*
* correct the offset of p, bp and mult_inv according zcrypt.h
* block size right aligned (skip the first byte)
*/
if (copy_from_user(p, crt->np_prime + MSGTYPE_ADJUSTMENT, short_len) ||
copy_from_user(q, crt->nq_prime, short_len) ||
copy_from_user(dp, crt->bp_key + MSGTYPE_ADJUSTMENT, short_len) ||
copy_from_user(dq, crt->bq_key, short_len) ||
copy_from_user(u, crt->u_mult_inv + MSGTYPE_ADJUSTMENT, short_len) ||
copy_from_user(inp, crt->inputdata, mod_len))
return -EFAULT;
return 0;
}
/**
* Copy results from a type 80 reply message back to user space.
*
* @zdev: crypto device pointer
* @reply: reply AP message.
* @data: pointer to user output data
* @length: size of user output data
*
* Returns 0 on success or -EFAULT.
*/
static int convert_type80(struct zcrypt_device *zdev,
struct ap_message *reply,
char __user *outputdata,
unsigned int outputdatalength)
{
struct type80_hdr *t80h = reply->message;
unsigned char *data;
if (t80h->len < sizeof(*t80h) + outputdatalength) {
/* The result is too short, the CEX2A card may not do that.. */
zdev->online = 0;
pr_err("Cryptographic device %x failed and was set offline\n",
AP_QID_DEVICE(zdev->ap_dev->qid));
ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
AP_QID_DEVICE(zdev->ap_dev->qid),
zdev->online, t80h->code);
return -EAGAIN; /* repeat the request on a different device. */
}
if (zdev->user_space_type == ZCRYPT_CEX2A)
BUG_ON(t80h->len > CEX2A_MAX_RESPONSE_SIZE);
else
BUG_ON(t80h->len > CEX3A_MAX_RESPONSE_SIZE);
data = reply->message + t80h->len - outputdatalength;
if (copy_to_user(outputdata, data, outputdatalength))
return -EFAULT;
return 0;
}
static int convert_response(struct zcrypt_device *zdev,
struct ap_message *reply,
char __user *outputdata,
unsigned int outputdatalength)
{
/* Response type byte is the second byte in the response. */
switch (((unsigned char *) reply->message)[1]) {
case TYPE82_RSP_CODE:
case TYPE88_RSP_CODE:
return convert_error(zdev, reply);
case TYPE80_RSP_CODE:
return convert_type80(zdev, reply,
outputdata, outputdatalength);
default: /* Unknown response type, this should NEVER EVER happen */
zdev->online = 0;
pr_err("Cryptographic device %x failed and was set offline\n",
AP_QID_DEVICE(zdev->ap_dev->qid));
ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online);
return -EAGAIN; /* repeat the request on a different device. */
}
}
/**
* This function is called from the AP bus code after a crypto request
* "msg" has finished with the reply message "reply".
* It is called from tasklet context.
* @ap_dev: pointer to the AP device
* @msg: pointer to the AP message
* @reply: pointer to the AP reply message
*/
static void zcrypt_cex2a_receive(struct ap_device *ap_dev,
struct ap_message *msg,
struct ap_message *reply)
{
static struct error_hdr error_reply = {
.type = TYPE82_RSP_CODE,
.reply_code = REP82_ERROR_MACHINE_FAILURE,
};
struct type80_hdr *t80h;
int length;
/* Copy the reply message to the request message buffer. */
if (!reply)
goto out; /* ap_msg->rc indicates the error */
t80h = reply->message;
if (t80h->type == TYPE80_RSP_CODE) {
if (ap_dev->device_type == AP_DEVICE_TYPE_CEX2A)
length = min_t(int,
CEX2A_MAX_RESPONSE_SIZE, t80h->len);
else
length = min_t(int,
CEX3A_MAX_RESPONSE_SIZE, t80h->len);
memcpy(msg->message, reply->message, length);
} else
memcpy(msg->message, reply->message, sizeof(error_reply));
out:
complete((struct completion *) msg->private);
}
static atomic_t zcrypt_step = ATOMIC_INIT(0);
/**
* The request distributor calls this function if it picked the CEX2A
* device to handle a modexpo request.
* @zdev: pointer to zcrypt_device structure that identifies the
* CEX2A device to the request distributor
* @mex: pointer to the modexpo request buffer
*/
static long zcrypt_cex2a_modexpo(struct zcrypt_device *zdev,
struct ica_rsa_modexpo *mex)
{
struct ap_message ap_msg;
struct completion work;
int rc;
ap_init_message(&ap_msg);
if (zdev->user_space_type == ZCRYPT_CEX2A)
ap_msg.message = kmalloc(MSGTYPE50_CRB2_MAX_MSG_SIZE,
GFP_KERNEL);
else
ap_msg.message = kmalloc(MSGTYPE50_CRB3_MAX_MSG_SIZE,
GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.receive = zcrypt_cex2a_receive;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
atomic_inc_return(&zcrypt_step);
ap_msg.private = &work;
rc = ICAMEX_msg_to_type50MEX_msg(zdev, &ap_msg, mex);
if (rc)
goto out_free;
init_completion(&work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&work);
if (rc == 0) {
rc = ap_msg.rc;
if (rc == 0)
rc = convert_response(zdev, &ap_msg, mex->outputdata,
mex->outputdatalength);
} else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
kfree(ap_msg.message);
return rc;
}
/**
* The request distributor calls this function if it picked the CEX2A
* device to handle a modexpo_crt request.
* @zdev: pointer to zcrypt_device structure that identifies the
* CEX2A device to the request distributor
* @crt: pointer to the modexpoc_crt request buffer
*/
static long zcrypt_cex2a_modexpo_crt(struct zcrypt_device *zdev,
struct ica_rsa_modexpo_crt *crt)
{
struct ap_message ap_msg;
struct completion work;
int rc;
ap_init_message(&ap_msg);
if (zdev->user_space_type == ZCRYPT_CEX2A)
ap_msg.message = kmalloc(MSGTYPE50_CRB2_MAX_MSG_SIZE,
GFP_KERNEL);
else
ap_msg.message = kmalloc(MSGTYPE50_CRB3_MAX_MSG_SIZE,
GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.receive = zcrypt_cex2a_receive;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
atomic_inc_return(&zcrypt_step);
ap_msg.private = &work;
rc = ICACRT_msg_to_type50CRT_msg(zdev, &ap_msg, crt);
if (rc)
goto out_free;
init_completion(&work);
ap_queue_message(zdev->ap_dev, &ap_msg);
rc = wait_for_completion_interruptible(&work);
if (rc == 0) {
rc = ap_msg.rc;
if (rc == 0)
rc = convert_response(zdev, &ap_msg, crt->outputdata,
crt->outputdatalength);
} else
/* Signal pending. */
ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
kfree(ap_msg.message);
return rc;
}
/**
* The crypto operations for message type 50.
*/
static struct zcrypt_ops zcrypt_msgtype50_ops = {
.rsa_modexpo = zcrypt_cex2a_modexpo,
.rsa_modexpo_crt = zcrypt_cex2a_modexpo_crt,
.owner = THIS_MODULE,
.name = MSGTYPE50_NAME,
.variant = MSGTYPE50_VARIANT_DEFAULT,
};
int __init zcrypt_msgtype50_init(void)
{
zcrypt_msgtype_register(&zcrypt_msgtype50_ops);
return 0;
}
void __exit zcrypt_msgtype50_exit(void)
{
zcrypt_msgtype_unregister(&zcrypt_msgtype50_ops);
}
module_init(zcrypt_msgtype50_init);
module_exit(zcrypt_msgtype50_exit);