swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: c9927c2bf4f45bb85e8b502ab3fb79ad6483c244 authored by Linus Torvalds on 24 October 2007, 03:50:57 UTC
Linux 2.6.24-rc1
Linux 2.6.24-rc1
Tip revision: c9927c2
smbno.h
#ifndef _SMBNO_H_
#define _SMBNO_H_
/* these define the attribute byte as seen by DOS */
#define aRONLY (1L<<0)
#define aHIDDEN (1L<<1)
#define aSYSTEM (1L<<2)
#define aVOLID (1L<<3)
#define aDIR (1L<<4)
#define aARCH (1L<<5)
/* error classes */
#define SUCCESS 0 /* The request was successful. */
#define ERRDOS 0x01 /* Error is from the core DOS operating system set. */
#define ERRSRV 0x02 /* Error is generated by the server network file manager.*/
#define ERRHRD 0x03 /* Error is an hardware error. */
#define ERRCMD 0xFF /* Command was not in the "SMB" format. */
/* SMB X/Open error codes for the ERRdos error class */
#define ERRbadfunc 1 /* Invalid function (or system call) */
#define ERRbadfile 2 /* File not found (pathname error) */
#define ERRbadpath 3 /* Directory not found */
#define ERRnofids 4 /* Too many open files */
#define ERRnoaccess 5 /* Access denied */
#define ERRbadfid 6 /* Invalid fid */
#define ERRbadmcb 7 /* Memory control blocks destroyed */
#define ERRnomem 8 /* Out of memory */
#define ERRbadmem 9 /* Invalid memory block address */
#define ERRbadenv 10 /* Invalid environment */
#define ERRbadformat 11 /* Invalid format */
#define ERRbadaccess 12 /* Invalid open mode */
#define ERRbaddata 13 /* Invalid data (only from ioctl call) */
#define ERRres 14 /* reserved */
#define ERRbaddrive 15 /* Invalid drive */
#define ERRremcd 16 /* Attempt to delete current directory */
#define ERRdiffdevice 17 /* rename/move across different filesystems */
#define ERRnofiles 18 /* no more files found in file search */
#define ERRbadshare 32 /* Share mode on file conflict with open mode */
#define ERRlock 33 /* Lock request conflicts with existing lock */
#define ERRfilexists 80 /* File in operation already exists */
#define ERRbadpipe 230 /* Named pipe invalid */
#define ERRpipebusy 231 /* All instances of pipe are busy */
#define ERRpipeclosing 232 /* named pipe close in progress */
#define ERRnotconnected 233 /* No process on other end of named pipe */
#define ERRmoredata 234 /* More data to be returned */
#define ERROR_INVALID_PARAMETER 87
#define ERROR_DISK_FULL 112
#define ERROR_INVALID_NAME 123
#define ERROR_DIR_NOT_EMPTY 145
#define ERROR_NOT_LOCKED 158
#define ERROR_ALREADY_EXISTS 183 /* see also 80 ? */
#define ERROR_EAS_DIDNT_FIT 275 /* Extended attributes didn't fit */
#define ERROR_EAS_NOT_SUPPORTED 282 /* Extended attributes not supported */
/* Error codes for the ERRSRV class */
#define ERRerror 1 /* Non specific error code */
#define ERRbadpw 2 /* Bad password */
#define ERRbadtype 3 /* reserved */
#define ERRaccess 4 /* No permissions to do the requested operation */
#define ERRinvnid 5 /* tid invalid */
#define ERRinvnetname 6 /* Invalid servername */
#define ERRinvdevice 7 /* Invalid device */
#define ERRqfull 49 /* Print queue full */
#define ERRqtoobig 50 /* Queued item too big */
#define ERRinvpfid 52 /* Invalid print file in smb_fid */
#define ERRsmbcmd 64 /* Unrecognised command */
#define ERRsrverror 65 /* smb server internal error */
#define ERRfilespecs 67 /* fid and pathname invalid combination */
#define ERRbadlink 68 /* reserved */
#define ERRbadpermits 69 /* Access specified for a file is not valid */
#define ERRbadpid 70 /* reserved */
#define ERRsetattrmode 71 /* attribute mode invalid */
#define ERRpaused 81 /* Message server paused */
#define ERRmsgoff 82 /* Not receiving messages */
#define ERRnoroom 83 /* No room for message */
#define ERRrmuns 87 /* too many remote usernames */
#define ERRtimeout 88 /* operation timed out */
#define ERRnoresource 89 /* No resources currently available for request. */
#define ERRtoomanyuids 90 /* too many userids */
#define ERRbaduid 91 /* bad userid */
#define ERRuseMPX 250 /* temporarily unable to use raw mode, use MPX mode */
#define ERRuseSTD 251 /* temporarily unable to use raw mode, use std.mode */
#define ERRcontMPX 252 /* resume MPX mode */
#define ERRbadPW /* reserved */
#define ERRnosupport 0xFFFF
/* Error codes for the ERRHRD class */
#define ERRnowrite 19 /* read only media */
#define ERRbadunit 20 /* Unknown device */
#define ERRnotready 21 /* Drive not ready */
#define ERRbadcmd 22 /* Unknown command */
#define ERRdata 23 /* Data (CRC) error */
#define ERRbadreq 24 /* Bad request structure length */
#define ERRseek 25
#define ERRbadmedia 26
#define ERRbadsector 27
#define ERRnopaper 28
#define ERRwrite 29 /* write fault */
#define ERRread 30 /* read fault */
#define ERRgeneral 31 /* General hardware failure */
#define ERRwrongdisk 34
#define ERRFCBunavail 35
#define ERRsharebufexc 36 /* share buffer exceeded */
#define ERRdiskfull 39
/*
* Access modes when opening a file
*/
#define SMB_ACCMASK 0x0003
#define SMB_O_RDONLY 0x0000
#define SMB_O_WRONLY 0x0001
#define SMB_O_RDWR 0x0002
/* offsets into message for common items */
#define smb_com 8
#define smb_rcls 9
#define smb_reh 10
#define smb_err 11
#define smb_flg 13
#define smb_flg2 14
#define smb_reb 13
#define smb_tid 28
#define smb_pid 30
#define smb_uid 32
#define smb_mid 34
#define smb_wct 36
#define smb_vwv 37
#define smb_vwv0 37
#define smb_vwv1 39
#define smb_vwv2 41
#define smb_vwv3 43
#define smb_vwv4 45
#define smb_vwv5 47
#define smb_vwv6 49
#define smb_vwv7 51
#define smb_vwv8 53
#define smb_vwv9 55
#define smb_vwv10 57
#define smb_vwv11 59
#define smb_vwv12 61
#define smb_vwv13 63
#define smb_vwv14 65
/* these are the trans2 sub fields for primary requests */
#define smb_tpscnt smb_vwv0
#define smb_tdscnt smb_vwv1
#define smb_mprcnt smb_vwv2
#define smb_mdrcnt smb_vwv3
#define smb_msrcnt smb_vwv4
#define smb_flags smb_vwv5
#define smb_timeout smb_vwv6
#define smb_pscnt smb_vwv9
#define smb_psoff smb_vwv10
#define smb_dscnt smb_vwv11
#define smb_dsoff smb_vwv12
#define smb_suwcnt smb_vwv13
#define smb_setup smb_vwv14
#define smb_setup0 smb_setup
#define smb_setup1 (smb_setup+2)
#define smb_setup2 (smb_setup+4)
/* these are for the secondary requests */
#define smb_spscnt smb_vwv2
#define smb_spsoff smb_vwv3
#define smb_spsdisp smb_vwv4
#define smb_sdscnt smb_vwv5
#define smb_sdsoff smb_vwv6
#define smb_sdsdisp smb_vwv7
#define smb_sfid smb_vwv8
/* and these for responses */
#define smb_tprcnt smb_vwv0
#define smb_tdrcnt smb_vwv1
#define smb_prcnt smb_vwv3
#define smb_proff smb_vwv4
#define smb_prdisp smb_vwv5
#define smb_drcnt smb_vwv6
#define smb_droff smb_vwv7
#define smb_drdisp smb_vwv8
/* the complete */
#define SMBmkdir 0x00 /* create directory */
#define SMBrmdir 0x01 /* delete directory */
#define SMBopen 0x02 /* open file */
#define SMBcreate 0x03 /* create file */
#define SMBclose 0x04 /* close file */
#define SMBflush 0x05 /* flush file */
#define SMBunlink 0x06 /* delete file */
#define SMBmv 0x07 /* rename file */
#define SMBgetatr 0x08 /* get file attributes */
#define SMBsetatr 0x09 /* set file attributes */
#define SMBread 0x0A /* read from file */
#define SMBwrite 0x0B /* write to file */
#define SMBlock 0x0C /* lock byte range */
#define SMBunlock 0x0D /* unlock byte range */
#define SMBctemp 0x0E /* create temporary file */
#define SMBmknew 0x0F /* make new file */
#define SMBchkpth 0x10 /* check directory path */
#define SMBexit 0x11 /* process exit */
#define SMBlseek 0x12 /* seek */
#define SMBtcon 0x70 /* tree connect */
#define SMBtconX 0x75 /* tree connect and X*/
#define SMBtdis 0x71 /* tree disconnect */
#define SMBnegprot 0x72 /* negotiate protocol */
#define SMBdskattr 0x80 /* get disk attributes */
#define SMBsearch 0x81 /* search directory */
#define SMBsplopen 0xC0 /* open print spool file */
#define SMBsplwr 0xC1 /* write to print spool file */
#define SMBsplclose 0xC2 /* close print spool file */
#define SMBsplretq 0xC3 /* return print queue */
#define SMBsends 0xD0 /* send single block message */
#define SMBsendb 0xD1 /* send broadcast message */
#define SMBfwdname 0xD2 /* forward user name */
#define SMBcancelf 0xD3 /* cancel forward */
#define SMBgetmac 0xD4 /* get machine name */
#define SMBsendstrt 0xD5 /* send start of multi-block message */
#define SMBsendend 0xD6 /* send end of multi-block message */
#define SMBsendtxt 0xD7 /* send text of multi-block message */
/* Core+ protocol */
#define SMBlockread 0x13 /* Lock a range and read */
#define SMBwriteunlock 0x14 /* Unlock a range then write */
#define SMBreadbraw 0x1a /* read a block of data with no smb header */
#define SMBwritebraw 0x1d /* write a block of data with no smb header */
#define SMBwritec 0x20 /* secondary write request */
#define SMBwriteclose 0x2c /* write a file then close it */
/* dos extended protocol */
#define SMBreadBraw 0x1A /* read block raw */
#define SMBreadBmpx 0x1B /* read block multiplexed */
#define SMBreadBs 0x1C /* read block (secondary response) */
#define SMBwriteBraw 0x1D /* write block raw */
#define SMBwriteBmpx 0x1E /* write block multiplexed */
#define SMBwriteBs 0x1F /* write block (secondary request) */
#define SMBwriteC 0x20 /* write complete response */
#define SMBsetattrE 0x22 /* set file attributes expanded */
#define SMBgetattrE 0x23 /* get file attributes expanded */
#define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
#define SMBtrans 0x25 /* transaction - name, bytes in/out */
#define SMBtranss 0x26 /* transaction (secondary request/response) */
#define SMBioctl 0x27 /* IOCTL */
#define SMBioctls 0x28 /* IOCTL (secondary request/response) */
#define SMBcopy 0x29 /* copy */
#define SMBmove 0x2A /* move */
#define SMBecho 0x2B /* echo */
#define SMBopenX 0x2D /* open and X */
#define SMBreadX 0x2E /* read and X */
#define SMBwriteX 0x2F /* write and X */
#define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
#define SMBtconX 0x75 /* tree connect and X */
#define SMBffirst 0x82 /* find first */
#define SMBfunique 0x83 /* find unique */
#define SMBfclose 0x84 /* find close */
#define SMBinvalid 0xFE /* invalid command */
/* Extended 2.0 protocol */
#define SMBtrans2 0x32 /* TRANS2 protocol set */
#define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
#define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
#define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
#define SMBulogoffX 0x74 /* user logoff */
/* these are the TRANS2 sub commands */
#define TRANSACT2_OPEN 0
#define TRANSACT2_FINDFIRST 1
#define TRANSACT2_FINDNEXT 2
#define TRANSACT2_QFSINFO 3
#define TRANSACT2_SETFSINFO 4
#define TRANSACT2_QPATHINFO 5
#define TRANSACT2_SETPATHINFO 6
#define TRANSACT2_QFILEINFO 7
#define TRANSACT2_SETFILEINFO 8
#define TRANSACT2_FSCTL 9
#define TRANSACT2_IOCTL 10
#define TRANSACT2_FINDNOTIFYFIRST 11
#define TRANSACT2_FINDNOTIFYNEXT 12
#define TRANSACT2_MKDIR 13
/* Information Levels - Shared? */
#define SMB_INFO_STANDARD 1
#define SMB_INFO_QUERY_EA_SIZE 2
#define SMB_INFO_QUERY_EAS_FROM_LIST 3
#define SMB_INFO_QUERY_ALL_EAS 4
#define SMB_INFO_IS_NAME_VALID 6
/* Information Levels - TRANSACT2_FINDFIRST */
#define SMB_FIND_FILE_DIRECTORY_INFO 0x101
#define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102
#define SMB_FIND_FILE_NAMES_INFO 0x103
#define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104
/* Information Levels - TRANSACT2_QPATHINFO */
#define SMB_QUERY_FILE_BASIC_INFO 0x101
#define SMB_QUERY_FILE_STANDARD_INFO 0x102
#define SMB_QUERY_FILE_EA_INFO 0x103
#define SMB_QUERY_FILE_NAME_INFO 0x104
#define SMB_QUERY_FILE_ALL_INFO 0x107
#define SMB_QUERY_FILE_ALT_NAME_INFO 0x108
#define SMB_QUERY_FILE_STREAM_INFO 0x109
#define SMB_QUERY_FILE_COMPRESSION_INFO 0x10b
/* Information Levels - TRANSACT2_SETFILEINFO */
#define SMB_SET_FILE_BASIC_INFO 0x101
#define SMB_SET_FILE_DISPOSITION_INFO 0x102
#define SMB_SET_FILE_ALLOCATION_INFO 0x103
#define SMB_SET_FILE_END_OF_FILE_INFO 0x104
/* smb_flg field flags */
#define SMB_FLAGS_SUPPORT_LOCKREAD 0x01
#define SMB_FLAGS_CLIENT_BUF_AVAIL 0x02
#define SMB_FLAGS_RESERVED 0x04
#define SMB_FLAGS_CASELESS_PATHNAMES 0x08
#define SMB_FLAGS_CANONICAL_PATHNAMES 0x10
#define SMB_FLAGS_REQUEST_OPLOCK 0x20
#define SMB_FLAGS_REQUEST_BATCH_OPLOCK 0x40
#define SMB_FLAGS_REPLY 0x80
/* smb_flg2 field flags (samba-2.2.0/source/include/smb.h) */
#define SMB_FLAGS2_LONG_PATH_COMPONENTS 0x0001
#define SMB_FLAGS2_EXTENDED_ATTRIBUTES 0x0002
#define SMB_FLAGS2_DFS_PATHNAMES 0x1000
#define SMB_FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000
#define SMB_FLAGS2_32_BIT_ERROR_CODES 0x4000
#define SMB_FLAGS2_UNICODE_STRINGS 0x8000
/*
* UNIX stuff (from samba trans2.h)
*/
#define MIN_UNIX_INFO_LEVEL 0x200
#define MAX_UNIX_INFO_LEVEL 0x2FF
#define SMB_FIND_FILE_UNIX 0x202
#define SMB_QUERY_FILE_UNIX_BASIC 0x200
#define SMB_QUERY_FILE_UNIX_LINK 0x201
#define SMB_QUERY_FILE_UNIX_HLINK 0x202
#define SMB_SET_FILE_UNIX_BASIC 0x200
#define SMB_SET_FILE_UNIX_LINK 0x201
#define SMB_SET_FILE_UNIX_HLINK 0x203
#define SMB_QUERY_CIFS_UNIX_INFO 0x200
/* values which means "don't change it" */
#define SMB_MODE_NO_CHANGE 0xFFFFFFFF
#define SMB_UID_NO_CHANGE 0xFFFFFFFF
#define SMB_GID_NO_CHANGE 0xFFFFFFFF
#define SMB_TIME_NO_CHANGE 0xFFFFFFFFFFFFFFFFULL
#define SMB_SIZE_NO_CHANGE 0xFFFFFFFFFFFFFFFFULL
/* UNIX filetype mappings. */
#define UNIX_TYPE_FILE 0
#define UNIX_TYPE_DIR 1
#define UNIX_TYPE_SYMLINK 2
#define UNIX_TYPE_CHARDEV 3
#define UNIX_TYPE_BLKDEV 4
#define UNIX_TYPE_FIFO 5
#define UNIX_TYPE_SOCKET 6
#define UNIX_TYPE_UNKNOWN 0xFFFFFFFF
#endif /* _SMBNO_H_ */