swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Tip revision: dc47ce90c3a822cd7c9e9339fe4d5f61dcb26b50 authored by Linus Torvalds on 09 December 2011, 23:09:32 UTC
Linux 3.2-rc5
Linux 3.2-rc5
Tip revision: dc47ce9
topology.h
/*
* include/linux/topology.h
*
* Written by: Matthew Dobson, IBM Corporation
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <colpatch@us.ibm.com>
*/
#ifndef _LINUX_TOPOLOGY_H
#define _LINUX_TOPOLOGY_H
#include <linux/cpumask.h>
#include <linux/bitops.h>
#include <linux/mmzone.h>
#include <linux/smp.h>
#include <linux/percpu.h>
#include <asm/topology.h>
#ifndef node_has_online_mem
#define node_has_online_mem(nid) (1)
#endif
#ifndef nr_cpus_node
#define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
#endif
#define for_each_node_with_cpus(node) \
for_each_online_node(node) \
if (nr_cpus_node(node))
int arch_update_cpu_topology(void);
/* Conform to ACPI 2.0 SLIT distance definitions */
#define LOCAL_DISTANCE 10
#define REMOTE_DISTANCE 20
#ifndef node_distance
#define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
#endif
#ifndef RECLAIM_DISTANCE
/*
* If the distance between nodes in a system is larger than RECLAIM_DISTANCE
* (in whatever arch specific measurement units returned by node_distance())
* then switch on zone reclaim on boot.
*/
#define RECLAIM_DISTANCE 30
#endif
#ifndef PENALTY_FOR_NODE_WITH_CPUS
#define PENALTY_FOR_NODE_WITH_CPUS (1)
#endif
/*
* Below are the 3 major initializers used in building sched_domains:
* SD_SIBLING_INIT, for SMT domains
* SD_CPU_INIT, for SMP domains
* SD_NODE_INIT, for NUMA domains
*
* Any architecture that cares to do any tuning to these values should do so
* by defining their own arch-specific initializer in include/asm/topology.h.
* A definition there will automagically override these default initializers
* and allow arch-specific performance tuning of sched_domains.
* (Only non-zero and non-null fields need be specified.)
*/
#ifdef CONFIG_SCHED_SMT
/* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is,
* so can't we drop this in favor of CONFIG_SCHED_SMT?
*/
#define ARCH_HAS_SCHED_WAKE_IDLE
/* Common values for SMT siblings */
#ifndef SD_SIBLING_INIT
#define SD_SIBLING_INIT (struct sched_domain) { \
.min_interval = 1, \
.max_interval = 2, \
.busy_factor = 64, \
.imbalance_pct = 110, \
\
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 1*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| 0*SD_PREFER_SIBLING \
| arch_sd_sibling_asym_packing() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
.smt_gain = 1178, /* 15% */ \
}
#endif
#endif /* CONFIG_SCHED_SMT */
#ifdef CONFIG_SCHED_MC
/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
#ifndef SD_MC_INIT
#define SD_MC_INIT (struct sched_domain) { \
.min_interval = 1, \
.max_interval = 4, \
.busy_factor = 64, \
.imbalance_pct = 125, \
.cache_nice_tries = 1, \
.busy_idx = 2, \
.wake_idx = 0, \
.forkexec_idx = 0, \
\
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| sd_balance_for_mc_power() \
| sd_power_saving_flags() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
}
#endif
#endif /* CONFIG_SCHED_MC */
/* Common values for CPUs */
#ifndef SD_CPU_INIT
#define SD_CPU_INIT (struct sched_domain) { \
.min_interval = 1, \
.max_interval = 4, \
.busy_factor = 64, \
.imbalance_pct = 125, \
.cache_nice_tries = 1, \
.busy_idx = 2, \
.idle_idx = 1, \
.newidle_idx = 0, \
.wake_idx = 0, \
.forkexec_idx = 0, \
\
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| sd_balance_for_package_power() \
| sd_power_saving_flags() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
}
#endif
/* sched_domains SD_ALLNODES_INIT for NUMA machines */
#define SD_ALLNODES_INIT (struct sched_domain) { \
.min_interval = 64, \
.max_interval = 64*num_online_cpus(), \
.busy_factor = 128, \
.imbalance_pct = 133, \
.cache_nice_tries = 1, \
.busy_idx = 3, \
.idle_idx = 3, \
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 0*SD_BALANCE_EXEC \
| 0*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 0*SD_WAKE_AFFINE \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
| 1*SD_SERIALIZE \
| 0*SD_PREFER_SIBLING \
, \
.last_balance = jiffies, \
.balance_interval = 64, \
}
#ifndef SD_NODES_PER_DOMAIN
#define SD_NODES_PER_DOMAIN 16
#endif
#ifdef CONFIG_SCHED_BOOK
#ifndef SD_BOOK_INIT
#error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
#endif
#endif /* CONFIG_SCHED_BOOK */
#ifdef CONFIG_NUMA
#ifndef SD_NODE_INIT
#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
#endif
#endif /* CONFIG_NUMA */
#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
DECLARE_PER_CPU(int, numa_node);
#ifndef numa_node_id
/* Returns the number of the current Node. */
static inline int numa_node_id(void)
{
return __this_cpu_read(numa_node);
}
#endif
#ifndef cpu_to_node
static inline int cpu_to_node(int cpu)
{
return per_cpu(numa_node, cpu);
}
#endif
#ifndef set_numa_node
static inline void set_numa_node(int node)
{
percpu_write(numa_node, node);
}
#endif
#ifndef set_cpu_numa_node
static inline void set_cpu_numa_node(int cpu, int node)
{
per_cpu(numa_node, cpu) = node;
}
#endif
#else /* !CONFIG_USE_PERCPU_NUMA_NODE_ID */
/* Returns the number of the current Node. */
#ifndef numa_node_id
static inline int numa_node_id(void)
{
return cpu_to_node(raw_smp_processor_id());
}
#endif
#endif /* [!]CONFIG_USE_PERCPU_NUMA_NODE_ID */
#ifdef CONFIG_HAVE_MEMORYLESS_NODES
/*
* N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
* It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
* Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem().
*/
DECLARE_PER_CPU(int, _numa_mem_);
#ifndef set_numa_mem
static inline void set_numa_mem(int node)
{
percpu_write(_numa_mem_, node);
}
#endif
#ifndef numa_mem_id
/* Returns the number of the nearest Node with memory */
static inline int numa_mem_id(void)
{
return __this_cpu_read(_numa_mem_);
}
#endif
#ifndef cpu_to_mem
static inline int cpu_to_mem(int cpu)
{
return per_cpu(_numa_mem_, cpu);
}
#endif
#ifndef set_cpu_numa_mem
static inline void set_cpu_numa_mem(int cpu, int node)
{
per_cpu(_numa_mem_, cpu) = node;
}
#endif
#else /* !CONFIG_HAVE_MEMORYLESS_NODES */
#ifndef numa_mem_id
/* Returns the number of the nearest Node with memory */
static inline int numa_mem_id(void)
{
return numa_node_id();
}
#endif
#ifndef cpu_to_mem
static inline int cpu_to_mem(int cpu)
{
return cpu_to_node(cpu);
}
#endif
#endif /* [!]CONFIG_HAVE_MEMORYLESS_NODES */
#ifndef topology_physical_package_id
#define topology_physical_package_id(cpu) ((void)(cpu), -1)
#endif
#ifndef topology_core_id
#define topology_core_id(cpu) ((void)(cpu), 0)
#endif
#ifndef topology_thread_cpumask
#define topology_thread_cpumask(cpu) cpumask_of(cpu)
#endif
#ifndef topology_core_cpumask
#define topology_core_cpumask(cpu) cpumask_of(cpu)
#endif
#endif /* _LINUX_TOPOLOGY_H */