swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: 19f949f52599ba7c3f67a5897ac6be14bfcb1200 authored by Linus Torvalds on 18 February 2013, 23:58:34 UTC
Linux 3.8
Linux 3.8
Tip revision: 19f949f
i387.c
/*
* Copyright (C) 1994 Linus Torvalds
*
* Pentium III FXSR, SSE support
* General FPU state handling cleanups
* Gareth Hughes <gareth@valinux.com>, May 2000
*/
#include <linux/module.h>
#include <linux/regset.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/sigcontext.h>
#include <asm/processor.h>
#include <asm/math_emu.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/user.h>
/*
* Were we in an interrupt that interrupted kernel mode?
*
* For now, with eagerfpu we will return interrupted kernel FPU
* state as not-idle. TBD: Ideally we can change the return value
* to something like __thread_has_fpu(current). But we need to
* be careful of doing __thread_clear_has_fpu() before saving
* the FPU etc for supporting nested uses etc. For now, take
* the simple route!
*
* On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that
* pair does nothing at all: the thread must not have fpu (so
* that we don't try to save the FPU state), and TS must
* be set (so that the clts/stts pair does nothing that is
* visible in the interrupted kernel thread).
*/
static inline bool interrupted_kernel_fpu_idle(void)
{
if (use_eager_fpu())
return 0;
return !__thread_has_fpu(current) &&
(read_cr0() & X86_CR0_TS);
}
/*
* Were we in user mode (or vm86 mode) when we were
* interrupted?
*
* Doing kernel_fpu_begin/end() is ok if we are running
* in an interrupt context from user mode - we'll just
* save the FPU state as required.
*/
static inline bool interrupted_user_mode(void)
{
struct pt_regs *regs = get_irq_regs();
return regs && user_mode_vm(regs);
}
/*
* Can we use the FPU in kernel mode with the
* whole "kernel_fpu_begin/end()" sequence?
*
* It's always ok in process context (ie "not interrupt")
* but it is sometimes ok even from an irq.
*/
bool irq_fpu_usable(void)
{
return !in_interrupt() ||
interrupted_user_mode() ||
interrupted_kernel_fpu_idle();
}
EXPORT_SYMBOL(irq_fpu_usable);
void __kernel_fpu_begin(void)
{
struct task_struct *me = current;
if (__thread_has_fpu(me)) {
__save_init_fpu(me);
__thread_clear_has_fpu(me);
/* We do 'stts()' in __kernel_fpu_end() */
} else if (!use_eager_fpu()) {
this_cpu_write(fpu_owner_task, NULL);
clts();
}
}
EXPORT_SYMBOL(__kernel_fpu_begin);
void __kernel_fpu_end(void)
{
if (use_eager_fpu())
math_state_restore();
else
stts();
}
EXPORT_SYMBOL(__kernel_fpu_end);
void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
if (__thread_has_fpu(tsk)) {
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
} else
tsk->fpu_counter = 0;
preempt_enable();
}
EXPORT_SYMBOL(unlazy_fpu);
unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
unsigned int xstate_size;
EXPORT_SYMBOL_GPL(xstate_size);
static struct i387_fxsave_struct fx_scratch __cpuinitdata;
static void __cpuinit mxcsr_feature_mask_init(void)
{
unsigned long mask = 0;
if (cpu_has_fxsr) {
memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
asm volatile("fxsave %0" : : "m" (fx_scratch));
mask = fx_scratch.mxcsr_mask;
if (mask == 0)
mask = 0x0000ffbf;
}
mxcsr_feature_mask &= mask;
}
static void __cpuinit init_thread_xstate(void)
{
/*
* Note that xstate_size might be overwriten later during
* xsave_init().
*/
if (!HAVE_HWFP) {
/*
* Disable xsave as we do not support it if i387
* emulation is enabled.
*/
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
xstate_size = sizeof(struct i387_soft_struct);
return;
}
if (cpu_has_fxsr)
xstate_size = sizeof(struct i387_fxsave_struct);
else
xstate_size = sizeof(struct i387_fsave_struct);
}
/*
* Called at bootup to set up the initial FPU state that is later cloned
* into all processes.
*/
void __cpuinit fpu_init(void)
{
unsigned long cr0;
unsigned long cr4_mask = 0;
if (cpu_has_fxsr)
cr4_mask |= X86_CR4_OSFXSR;
if (cpu_has_xmm)
cr4_mask |= X86_CR4_OSXMMEXCPT;
if (cr4_mask)
set_in_cr4(cr4_mask);
cr0 = read_cr0();
cr0 &= ~(X86_CR0_TS|X86_CR0_EM); /* clear TS and EM */
if (!HAVE_HWFP)
cr0 |= X86_CR0_EM;
write_cr0(cr0);
/*
* init_thread_xstate is only called once to avoid overriding
* xstate_size during boot time or during CPU hotplug.
*/
if (xstate_size == 0)
init_thread_xstate();
mxcsr_feature_mask_init();
xsave_init();
eager_fpu_init();
}
void fpu_finit(struct fpu *fpu)
{
if (!HAVE_HWFP) {
finit_soft_fpu(&fpu->state->soft);
return;
}
if (cpu_has_fxsr) {
fx_finit(&fpu->state->fxsave);
} else {
struct i387_fsave_struct *fp = &fpu->state->fsave;
memset(fp, 0, xstate_size);
fp->cwd = 0xffff037fu;
fp->swd = 0xffff0000u;
fp->twd = 0xffffffffu;
fp->fos = 0xffff0000u;
}
}
EXPORT_SYMBOL_GPL(fpu_finit);
/*
* The _current_ task is using the FPU for the first time
* so initialize it and set the mxcsr to its default
* value at reset if we support XMM instructions and then
* remember the current task has used the FPU.
*/
int init_fpu(struct task_struct *tsk)
{
int ret;
if (tsk_used_math(tsk)) {
if (HAVE_HWFP && tsk == current)
unlazy_fpu(tsk);
tsk->thread.fpu.last_cpu = ~0;
return 0;
}
/*
* Memory allocation at the first usage of the FPU and other state.
*/
ret = fpu_alloc(&tsk->thread.fpu);
if (ret)
return ret;
fpu_finit(&tsk->thread.fpu);
set_stopped_child_used_math(tsk);
return 0;
}
EXPORT_SYMBOL_GPL(init_fpu);
/*
* The xstateregs_active() routine is the same as the fpregs_active() routine,
* as the "regset->n" for the xstate regset will be updated based on the feature
* capabilites supported by the xsave.
*/
int fpregs_active(struct task_struct *target, const struct user_regset *regset)
{
return tsk_used_math(target) ? regset->n : 0;
}
int xfpregs_active(struct task_struct *target, const struct user_regset *regset)
{
return (cpu_has_fxsr && tsk_used_math(target)) ? regset->n : 0;
}
int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
int ret;
if (!cpu_has_fxsr)
return -ENODEV;
ret = init_fpu(target);
if (ret)
return ret;
sanitize_i387_state(target);
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.state->fxsave, 0, -1);
}
int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
int ret;
if (!cpu_has_fxsr)
return -ENODEV;
ret = init_fpu(target);
if (ret)
return ret;
sanitize_i387_state(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.state->fxsave, 0, -1);
/*
* mxcsr reserved bits must be masked to zero for security reasons.
*/
target->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
/*
* update the header bits in the xsave header, indicating the
* presence of FP and SSE state.
*/
if (cpu_has_xsave)
target->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
return ret;
}
int xstateregs_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
int ret;
if (!cpu_has_xsave)
return -ENODEV;
ret = init_fpu(target);
if (ret)
return ret;
/*
* Copy the 48bytes defined by the software first into the xstate
* memory layout in the thread struct, so that we can copy the entire
* xstateregs to the user using one user_regset_copyout().
*/
memcpy(&target->thread.fpu.state->fxsave.sw_reserved,
xstate_fx_sw_bytes, sizeof(xstate_fx_sw_bytes));
/*
* Copy the xstate memory layout.
*/
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.state->xsave, 0, -1);
return ret;
}
int xstateregs_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
int ret;
struct xsave_hdr_struct *xsave_hdr;
if (!cpu_has_xsave)
return -ENODEV;
ret = init_fpu(target);
if (ret)
return ret;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.state->xsave, 0, -1);
/*
* mxcsr reserved bits must be masked to zero for security reasons.
*/
target->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
xsave_hdr = &target->thread.fpu.state->xsave.xsave_hdr;
xsave_hdr->xstate_bv &= pcntxt_mask;
/*
* These bits must be zero.
*/
xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
return ret;
}
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
/*
* FPU tag word conversions.
*/
static inline unsigned short twd_i387_to_fxsr(unsigned short twd)
{
unsigned int tmp; /* to avoid 16 bit prefixes in the code */
/* Transform each pair of bits into 01 (valid) or 00 (empty) */
tmp = ~twd;
tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
/* and move the valid bits to the lower byte. */
tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
return tmp;
}
#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16)
#define FP_EXP_TAG_VALID 0
#define FP_EXP_TAG_ZERO 1
#define FP_EXP_TAG_SPECIAL 2
#define FP_EXP_TAG_EMPTY 3
static inline u32 twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave)
{
struct _fpxreg *st;
u32 tos = (fxsave->swd >> 11) & 7;
u32 twd = (unsigned long) fxsave->twd;
u32 tag;
u32 ret = 0xffff0000u;
int i;
for (i = 0; i < 8; i++, twd >>= 1) {
if (twd & 0x1) {
st = FPREG_ADDR(fxsave, (i - tos) & 7);
switch (st->exponent & 0x7fff) {
case 0x7fff:
tag = FP_EXP_TAG_SPECIAL;
break;
case 0x0000:
if (!st->significand[0] &&
!st->significand[1] &&
!st->significand[2] &&
!st->significand[3])
tag = FP_EXP_TAG_ZERO;
else
tag = FP_EXP_TAG_SPECIAL;
break;
default:
if (st->significand[3] & 0x8000)
tag = FP_EXP_TAG_VALID;
else
tag = FP_EXP_TAG_SPECIAL;
break;
}
} else {
tag = FP_EXP_TAG_EMPTY;
}
ret |= tag << (2 * i);
}
return ret;
}
/*
* FXSR floating point environment conversions.
*/
void
convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
{
struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave;
struct _fpreg *to = (struct _fpreg *) &env->st_space[0];
struct _fpxreg *from = (struct _fpxreg *) &fxsave->st_space[0];
int i;
env->cwd = fxsave->cwd | 0xffff0000u;
env->swd = fxsave->swd | 0xffff0000u;
env->twd = twd_fxsr_to_i387(fxsave);
#ifdef CONFIG_X86_64
env->fip = fxsave->rip;
env->foo = fxsave->rdp;
/*
* should be actually ds/cs at fpu exception time, but
* that information is not available in 64bit mode.
*/
env->fcs = task_pt_regs(tsk)->cs;
if (tsk == current) {
savesegment(ds, env->fos);
} else {
env->fos = tsk->thread.ds;
}
env->fos |= 0xffff0000;
#else
env->fip = fxsave->fip;
env->fcs = (u16) fxsave->fcs | ((u32) fxsave->fop << 16);
env->foo = fxsave->foo;
env->fos = fxsave->fos;
#endif
for (i = 0; i < 8; ++i)
memcpy(&to[i], &from[i], sizeof(to[0]));
}
void convert_to_fxsr(struct task_struct *tsk,
const struct user_i387_ia32_struct *env)
{
struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave;
struct _fpreg *from = (struct _fpreg *) &env->st_space[0];
struct _fpxreg *to = (struct _fpxreg *) &fxsave->st_space[0];
int i;
fxsave->cwd = env->cwd;
fxsave->swd = env->swd;
fxsave->twd = twd_i387_to_fxsr(env->twd);
fxsave->fop = (u16) ((u32) env->fcs >> 16);
#ifdef CONFIG_X86_64
fxsave->rip = env->fip;
fxsave->rdp = env->foo;
/* cs and ds ignored */
#else
fxsave->fip = env->fip;
fxsave->fcs = (env->fcs & 0xffff);
fxsave->foo = env->foo;
fxsave->fos = env->fos;
#endif
for (i = 0; i < 8; ++i)
memcpy(&to[i], &from[i], sizeof(from[0]));
}
int fpregs_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
struct user_i387_ia32_struct env;
int ret;
ret = init_fpu(target);
if (ret)
return ret;
if (!HAVE_HWFP)
return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
if (!cpu_has_fxsr) {
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.state->fsave, 0,
-1);
}
sanitize_i387_state(target);
if (kbuf && pos == 0 && count == sizeof(env)) {
convert_from_fxsr(kbuf, target);
return 0;
}
convert_from_fxsr(&env, target);
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &env, 0, -1);
}
int fpregs_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
struct user_i387_ia32_struct env;
int ret;
ret = init_fpu(target);
if (ret)
return ret;
sanitize_i387_state(target);
if (!HAVE_HWFP)
return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
if (!cpu_has_fxsr) {
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.state->fsave, 0, -1);
}
if (pos > 0 || count < sizeof(env))
convert_from_fxsr(&env, target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &env, 0, -1);
if (!ret)
convert_to_fxsr(target, &env);
/*
* update the header bit in the xsave header, indicating the
* presence of FP.
*/
if (cpu_has_xsave)
target->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;
return ret;
}
/*
* FPU state for core dumps.
* This is only used for a.out dumps now.
* It is declared generically using elf_fpregset_t (which is
* struct user_i387_struct) but is in fact only used for 32-bit
* dumps, so on 64-bit it is really struct user_i387_ia32_struct.
*/
int dump_fpu(struct pt_regs *regs, struct user_i387_struct *fpu)
{
struct task_struct *tsk = current;
int fpvalid;
fpvalid = !!used_math();
if (fpvalid)
fpvalid = !fpregs_get(tsk, NULL,
0, sizeof(struct user_i387_ia32_struct),
fpu, NULL);
return fpvalid;
}
EXPORT_SYMBOL(dump_fpu);
#endif /* CONFIG_X86_32 || CONFIG_IA32_EMULATION */