swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: 36f90b0a2ddd60823fe193a85e60ff1906c2a9b3 authored by Linus Torvalds on 01 February 2016, 02:12:16 UTC
Linux 4.5-rc2
Linux 4.5-rc2
Tip revision: 36f90b0
Kconfig
#
# Industrial I/O subsystem configuration
#
menuconfig IIO
tristate "Industrial I/O support"
select ANON_INODES
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
number of different physical interfaces (i2c, spi, etc).
if IIO
config IIO_BUFFER
bool "Enable buffer support within IIO"
help
Provide core support for various buffer based data
acquisition methods.
if IIO_BUFFER
source "drivers/iio/buffer/Kconfig"
endif # IIO_BUFFER
config IIO_CONFIGFS
tristate "Enable IIO configuration via configfs"
select CONFIGFS_FS
help
This allows configuring various IIO bits through configfs
(e.g. software triggers). For more info see
Documentation/iio/iio_configfs.txt.
config IIO_TRIGGER
bool "Enable triggered sampling support"
help
Provides IIO core support for triggers. Currently these
are used to initialize capture of samples to push into
buffers. The triggers are effectively a 'capture
data now' interrupt.
config IIO_CONSUMERS_PER_TRIGGER
int "Maximum number of consumers per trigger"
depends on IIO_TRIGGER
default "2"
help
This value controls the maximum number of consumers that a
given trigger may handle. Default is 2.
config IIO_SW_TRIGGER
tristate "Enable software triggers support"
select IIO_CONFIGFS
help
Provides IIO core support for software triggers. A software
trigger can be created via configfs or directly by a driver
using the API provided.
config IIO_TRIGGERED_EVENT
tristate
select IIO_TRIGGER
help
Provides helper functions for setting up triggered events.
source "drivers/iio/accel/Kconfig"
source "drivers/iio/adc/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
source "drivers/iio/chemical/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/dummy/Kconfig"
source "drivers/iio/frequency/Kconfig"
source "drivers/iio/gyro/Kconfig"
source "drivers/iio/health/Kconfig"
source "drivers/iio/humidity/Kconfig"
source "drivers/iio/imu/Kconfig"
source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"
source "drivers/iio/orientation/Kconfig"
if IIO_TRIGGER
source "drivers/iio/trigger/Kconfig"
endif #IIO_TRIGGER
source "drivers/iio/potentiometer/Kconfig"
source "drivers/iio/pressure/Kconfig"
source "drivers/iio/proximity/Kconfig"
source "drivers/iio/temperature/Kconfig"
endif # IIO