swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: 98d54f81e36ba3bf92172791eba5ca5bd813989b authored by Linus Torvalds on 01 March 2020, 22:38:46 UTC
Linux 5.6-rc4
Linux 5.6-rc4
Tip revision: 98d54f8
alps.h
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* ALPS touchpad PS/2 mouse driver
*
* Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
*/
#ifndef _ALPS_H
#define _ALPS_H
#include <linux/input/mt.h>
#define ALPS_PROTO_V1 0x100
#define ALPS_PROTO_V2 0x200
#define ALPS_PROTO_V3 0x300
#define ALPS_PROTO_V3_RUSHMORE 0x310
#define ALPS_PROTO_V4 0x400
#define ALPS_PROTO_V5 0x500
#define ALPS_PROTO_V6 0x600
#define ALPS_PROTO_V7 0x700 /* t3btl t4s */
#define ALPS_PROTO_V8 0x800 /* SS4btl SS4s */
#define ALPS_PROTO_V9 0x900 /* ss3btl */
#define MAX_TOUCHES 4
#define DOLPHIN_COUNT_PER_ELECTRODE 64
#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */
#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */
/*
* enum SS4_PACKET_ID - defines the packet type for V8
* SS4_PACKET_ID_IDLE: There's no finger and no button activity.
* SS4_PACKET_ID_ONE: There's one finger on touchpad
* or there's button activities.
* SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
* SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
* SS4_PACKET_ID_STICK: A stick pointer packet
*/
enum SS4_PACKET_ID {
SS4_PACKET_ID_IDLE = 0,
SS4_PACKET_ID_ONE,
SS4_PACKET_ID_TWO,
SS4_PACKET_ID_MULTI,
SS4_PACKET_ID_STICK,
};
#define SS4_COUNT_PER_ELECTRODE 256
#define SS4_NUMSENSOR_XOFFSET 7
#define SS4_NUMSENSOR_YOFFSET 7
#define SS4_MIN_PITCH_MM 50
#define SS4_MASK_NORMAL_BUTTONS 0x07
#define SS4PLUS_COUNT_PER_ELECTRODE 128
#define SS4PLUS_NUMSENSOR_XOFFSET 16
#define SS4PLUS_NUMSENSOR_YOFFSET 5
#define SS4PLUS_MIN_PITCH_MM 37
#define IS_SS4PLUS_DEV(_b) (((_b[0]) == 0x73) && \
((_b[1]) == 0x03) && \
((_b[2]) == 0x28) \
)
#define SS4_IS_IDLE_V2(_b) (((_b[0]) == 0x18) && \
((_b[1]) == 0x10) && \
((_b[2]) == 0x00) && \
((_b[3] & 0x88) == 0x08) && \
((_b[4]) == 0x10) && \
((_b[5]) == 0x00) \
)
#define SS4_1F_X_V2(_b) (((_b[0]) & 0x0007) | \
((_b[1] << 3) & 0x0078) | \
((_b[1] << 2) & 0x0380) | \
((_b[2] << 5) & 0x1C00) \
)
#define SS4_1F_Y_V2(_b) (((_b[2]) & 0x000F) | \
((_b[3] >> 2) & 0x0030) | \
((_b[4] << 6) & 0x03C0) | \
((_b[4] << 5) & 0x0C00) \
)
#define SS4_1F_Z_V2(_b) (((_b[5]) & 0x0F) | \
((_b[5] >> 1) & 0x70) | \
((_b[4]) & 0x80) \
)
#define SS4_1F_LFB_V2(_b) (((_b[2] >> 4) & 0x01) == 0x01)
#define SS4_MF_LF_V2(_b, _i) ((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
#define SS4_BTN_V2(_b) ((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
#define SS4_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 5) & 0x00E0) | \
((_b[1 + _i * 3] << 5) & 0x1F00) \
)
#define SS4_PLUS_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 4) & 0x0070) | \
((_b[1 + (_i) * 3] << 4) & 0x0F80) \
)
#define SS4_STD_MF_Y_V2(_b, _i) (((_b[1 + (_i) * 3] << 3) & 0x0010) | \
((_b[2 + (_i) * 3] << 5) & 0x01E0) | \
((_b[2 + (_i) * 3] << 4) & 0x0E00) \
)
#define SS4_BTL_MF_X_V2(_b, _i) (SS4_STD_MF_X_V2(_b, _i) | \
((_b[0 + (_i) * 3] >> 3) & 0x0010) \
)
#define SS4_PLUS_BTL_MF_X_V2(_b, _i) (SS4_PLUS_STD_MF_X_V2(_b, _i) | \
((_b[0 + (_i) * 3] >> 4) & 0x0008) \
)
#define SS4_BTL_MF_Y_V2(_b, _i) (SS4_STD_MF_Y_V2(_b, _i) | \
((_b[0 + (_i) * 3] >> 3) & 0x0008) \
)
#define SS4_MF_Z_V2(_b, _i) (((_b[1 + (_i) * 3]) & 0x0001) | \
((_b[1 + (_i) * 3] >> 1) & 0x0002) \
)
#define SS4_IS_MF_CONTINUE(_b) ((_b[2] & 0x10) == 0x10)
#define SS4_IS_5F_DETECTED(_b) ((_b[2] & 0x10) == 0x10)
#define SS4_TS_X_V2(_b) (s8)( \
((_b[0] & 0x01) << 7) | \
(_b[1] & 0x7F) \
)
#define SS4_TS_Y_V2(_b) -(s8)( \
((_b[3] & 0x01) << 7) | \
(_b[2] & 0x7F) \
)
#define SS4_TS_Z_V2(_b) (s8)(_b[4] & 0x7F)
#define SS4_MFPACKET_NO_AX 8160 /* X-Coordinate value */
#define SS4_MFPACKET_NO_AY 4080 /* Y-Coordinate value */
#define SS4_MFPACKET_NO_AX_BL 8176 /* Buttonless X-Coord value */
#define SS4_MFPACKET_NO_AY_BL 4088 /* Buttonless Y-Coord value */
#define SS4_PLUS_MFPACKET_NO_AX 4080 /* SS4 PLUS, X */
#define SS4_PLUS_MFPACKET_NO_AX_BL 4088 /* Buttonless SS4 PLUS, X */
/*
* enum V7_PACKET_ID - defines the packet type for V7
* V7_PACKET_ID_IDLE: There's no finger and no button activity.
* V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
* or there's button activities.
* V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
* V7_PACKET_ID_NEW: The finger position in slot is not continues from
* previous packet.
*/
enum V7_PACKET_ID {
V7_PACKET_ID_IDLE,
V7_PACKET_ID_TWO,
V7_PACKET_ID_MULTI,
V7_PACKET_ID_NEW,
V7_PACKET_ID_UNKNOWN,
};
/**
* struct alps_protocol_info - information about protocol used by a device
* @version: Indicates V1/V2/V3/...
* @byte0: Helps figure out whether a position report packet matches the
* known format for this model. The first byte of the report, ANDed with
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
*/
struct alps_protocol_info {
u16 version;
u8 byte0, mask0;
unsigned int flags;
};
/**
* struct alps_model_info - touchpad ID table
* @signature: E7 response string to match.
* @protocol_info: information about protocol used by the device.
*
* Many (but not all) ALPS touchpads can be identified by looking at the
* values returned in the "E7 report" and/or the "EC report." This table
* lists a number of such touchpads.
*/
struct alps_model_info {
u8 signature[3];
struct alps_protocol_info protocol_info;
};
/**
* struct alps_nibble_commands - encodings for register accesses
* @command: PS/2 command used for the nibble
* @data: Data supplied as an argument to the PS/2 command, if applicable
*
* The ALPS protocol uses magic sequences to transmit binary data to the
* touchpad, as it is generally not OK to send arbitrary bytes out the
* PS/2 port. Each of the sequences in this table sends one nibble of the
* register address or (write) data. Different versions of the ALPS protocol
* use slightly different encodings.
*/
struct alps_nibble_commands {
int command;
unsigned char data;
};
struct alps_bitmap_point {
int start_bit;
int num_bits;
};
/**
* struct alps_fields - decoded version of the report packet
* @x_map: Bitmap of active X positions for MT.
* @y_map: Bitmap of active Y positions for MT.
* @fingers: Number of fingers for MT.
* @pressure: Pressure.
* @st: position for ST.
* @mt: position for MT.
* @first_mp: Packet is the first of a multi-packet report.
* @is_mp: Packet is part of a multi-packet report.
* @left: Left touchpad button is active.
* @right: Right touchpad button is active.
* @middle: Middle touchpad button is active.
* @ts_left: Left trackstick button is active.
* @ts_right: Right trackstick button is active.
* @ts_middle: Middle trackstick button is active.
*/
struct alps_fields {
unsigned int x_map;
unsigned int y_map;
unsigned int fingers;
int pressure;
struct input_mt_pos st;
struct input_mt_pos mt[MAX_TOUCHES];
unsigned int first_mp:1;
unsigned int is_mp:1;
unsigned int left:1;
unsigned int right:1;
unsigned int middle:1;
unsigned int ts_left:1;
unsigned int ts_right:1;
unsigned int ts_middle:1;
};
/**
* struct alps_data - private data structure for the ALPS driver
* @psmouse: Pointer to parent psmouse device
* @dev2: Trackstick device (can be NULL).
* @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
* @phys2: Physical path for the trackstick device.
* @phys3: Physical path for the generic PS/2 mouse.
* @dev3_register_work: Delayed work for registering PS/2 mouse.
* @nibble_commands: Command mapping used for touchpad register accesses.
* @addr_command: Command used to tell the touchpad that a register address
* follows.
* @proto_version: Indicates V1/V2/V3/...
* @byte0: Helps figure out whether a position report packet matches the
* known format for this model. The first byte of the report, ANDed with
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @fw_ver: cached copy of firmware version (EC report)
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
* @x_max: Largest possible X position value.
* @y_max: Largest possible Y position value.
* @x_bits: Number of X bits in the MT bitmap.
* @y_bits: Number of Y bits in the MT bitmap.
* @hw_init: Protocol-specific hardware init function.
* @process_packet: Protocol-specific function to process a report packet.
* @decode_fields: Protocol-specific function to read packet bitfields.
* @set_abs_params: Protocol-specific function to configure the input_dev.
* @prev_fin: Finger bit from previous packet.
* @multi_packet: Multi-packet data in progress.
* @multi_data: Saved multi-packet data.
* @f: Decoded packet data fields.
* @quirks: Bitmap of ALPS_QUIRK_*.
* @timer: Timer for flushing out the final report packet in the stream.
*/
struct alps_data {
struct psmouse *psmouse;
struct input_dev *dev2;
struct input_dev *dev3;
char phys2[32];
char phys3[32];
struct delayed_work dev3_register_work;
/* these are autodetected when the device is identified */
const struct alps_nibble_commands *nibble_commands;
int addr_command;
u16 proto_version;
u8 byte0, mask0;
u8 dev_id[3];
u8 fw_ver[3];
int flags;
int x_max;
int y_max;
int x_bits;
int y_bits;
unsigned int x_res;
unsigned int y_res;
int (*hw_init)(struct psmouse *psmouse);
void (*process_packet)(struct psmouse *psmouse);
int (*decode_fields)(struct alps_fields *f, unsigned char *p,
struct psmouse *psmouse);
void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
int prev_fin;
int multi_packet;
int second_touch;
unsigned char multi_data[6];
struct alps_fields f;
u8 quirks;
struct timer_list timer;
};
#define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */
int alps_detect(struct psmouse *psmouse, bool set_properties);
int alps_init(struct psmouse *psmouse);
#endif