swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: b3a987b0264d3ddbb24293ebff10eddfc472f653 authored by Linus Torvalds on 13 January 2020, 00:55:08 UTC
Linux 5.5-rc6
Linux 5.5-rc6
Tip revision: b3a987b
gpio_mouse.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for simulating a mouse on GPIO lines.
*
* Copyright (C) 2007 Atmel Corporation
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio/consumer.h>
#include <linux/property.h>
#include <linux/of.h>
/**
* struct gpio_mouse
* @scan_ms: the scan interval in milliseconds.
* @up: GPIO line for up value.
* @down: GPIO line for down value.
* @left: GPIO line for left value.
* @right: GPIO line for right value.
* @bleft: GPIO line for left button.
* @bmiddle: GPIO line for middle button.
* @bright: GPIO line for right button.
*
* This struct must be added to the platform_device in the board code.
* It is used by the gpio_mouse driver to setup GPIO lines and to
* calculate mouse movement.
*/
struct gpio_mouse {
u32 scan_ms;
struct gpio_desc *up;
struct gpio_desc *down;
struct gpio_desc *left;
struct gpio_desc *right;
struct gpio_desc *bleft;
struct gpio_desc *bmiddle;
struct gpio_desc *bright;
};
/*
* Timer function which is run every scan_ms ms when the device is opened.
* The dev input variable is set to the the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_dev *input)
{
struct gpio_mouse *gpio = input_get_drvdata(input);
int x, y;
if (gpio->bleft)
input_report_key(input, BTN_LEFT,
gpiod_get_value(gpio->bleft));
if (gpio->bmiddle)
input_report_key(input, BTN_MIDDLE,
gpiod_get_value(gpio->bmiddle));
if (gpio->bright)
input_report_key(input, BTN_RIGHT,
gpiod_get_value(gpio->bright));
x = gpiod_get_value(gpio->right) - gpiod_get_value(gpio->left);
y = gpiod_get_value(gpio->down) - gpiod_get_value(gpio->up);
input_report_rel(input, REL_X, x);
input_report_rel(input, REL_Y, y);
input_sync(input);
}
static int gpio_mouse_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct gpio_mouse *gmouse;
struct input_dev *input;
int error;
gmouse = devm_kzalloc(dev, sizeof(*gmouse), GFP_KERNEL);
if (!gmouse)
return -ENOMEM;
/* Assign some default scanning time */
error = device_property_read_u32(dev, "scan-interval-ms",
&gmouse->scan_ms);
if (error || gmouse->scan_ms == 0) {
dev_warn(dev, "invalid scan time, set to 50 ms\n");
gmouse->scan_ms = 50;
}
gmouse->up = devm_gpiod_get(dev, "up", GPIOD_IN);
if (IS_ERR(gmouse->up))
return PTR_ERR(gmouse->up);
gmouse->down = devm_gpiod_get(dev, "down", GPIOD_IN);
if (IS_ERR(gmouse->down))
return PTR_ERR(gmouse->down);
gmouse->left = devm_gpiod_get(dev, "left", GPIOD_IN);
if (IS_ERR(gmouse->left))
return PTR_ERR(gmouse->left);
gmouse->right = devm_gpiod_get(dev, "right", GPIOD_IN);
if (IS_ERR(gmouse->right))
return PTR_ERR(gmouse->right);
gmouse->bleft = devm_gpiod_get_optional(dev, "button-left", GPIOD_IN);
if (IS_ERR(gmouse->bleft))
return PTR_ERR(gmouse->bleft);
gmouse->bmiddle = devm_gpiod_get_optional(dev, "button-middle",
GPIOD_IN);
if (IS_ERR(gmouse->bmiddle))
return PTR_ERR(gmouse->bmiddle);
gmouse->bright = devm_gpiod_get_optional(dev, "button-right",
GPIOD_IN);
if (IS_ERR(gmouse->bright))
return PTR_ERR(gmouse->bright);
input = devm_input_allocate_device(dev);
if (!input)
return -ENOMEM;
input->name = pdev->name;
input->id.bustype = BUS_HOST;
input_set_drvdata(input, gmouse);
input_set_capability(input, EV_REL, REL_X);
input_set_capability(input, EV_REL, REL_Y);
if (gmouse->bleft)
input_set_capability(input, EV_KEY, BTN_LEFT);
if (gmouse->bmiddle)
input_set_capability(input, EV_KEY, BTN_MIDDLE);
if (gmouse->bright)
input_set_capability(input, EV_KEY, BTN_RIGHT);
error = input_setup_polling(input, gpio_mouse_scan);
if (error)
return error;
input_set_poll_interval(input, gmouse->scan_ms);
error = input_register_device(input);
if (error) {
dev_err(dev, "could not register input device\n");
return error;
}
dev_dbg(dev, "%d ms scan time, buttons: %s%s%s\n",
gmouse->scan_ms,
gmouse->bleft ? "" : "left ",
gmouse->bmiddle ? "" : "middle ",
gmouse->bright ? "" : "right");
return 0;
}
static const struct of_device_id gpio_mouse_of_match[] = {
{ .compatible = "gpio-mouse", },
{ },
};
MODULE_DEVICE_TABLE(of, gpio_mouse_of_match);
static struct platform_driver gpio_mouse_device_driver = {
.probe = gpio_mouse_probe,
.driver = {
.name = "gpio_mouse",
.of_match_table = gpio_mouse_of_match,
}
};
module_platform_driver(gpio_mouse_device_driver);
MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("GPIO mouse driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */