swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: ba4f184e126b751d1bffad5897f263108befc780 authored by Linus Torvalds on 20 September 2020, 23:33:55 UTC
Linux 5.9-rc6
Linux 5.9-rc6
Tip revision: ba4f184
synaptics_usb.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* USB Synaptics device driver
*
* Copyright (c) 2002 Rob Miller (rob@inpharmatica . co . uk)
* Copyright (c) 2003 Ron Lee (ron@debian.org)
* cPad driver for kernel 2.4
*
* Copyright (c) 2004 Jan Steinhoff (cpad@jan-steinhoff . de)
* Copyright (c) 2004 Ron Lee (ron@debian.org)
* rewritten for kernel 2.6
*
* cPad display character device part is not included. It can be found at
* http://jan-steinhoff.de/linux/synaptics-usb.html
*
* Bases on: usb_skeleton.c v2.2 by Greg Kroah-Hartman
* drivers/hid/usbhid/usbmouse.c by Vojtech Pavlik
* drivers/input/mouse/synaptics.c by Peter Osterlund
*
* Trademarks are the property of their respective owners.
*/
/*
* There are three different types of Synaptics USB devices: Touchpads,
* touchsticks (or trackpoints), and touchscreens. Touchpads are well supported
* by this driver, touchstick support has not been tested much yet, and
* touchscreens have not been tested at all.
*
* Up to three alternate settings are possible:
* setting 0: one int endpoint for relative movement (used by usbhid.ko)
* setting 1: one int endpoint for absolute finger position
* setting 2 (cPad only): one int endpoint for absolute finger position and
* two bulk endpoints for the display (in/out)
* This driver uses setting 1.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/input.h>
#include <linux/usb/input.h>
#define USB_VENDOR_ID_SYNAPTICS 0x06cb
#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 /* Synaptics USB TouchPad */
#define USB_DEVICE_ID_SYNAPTICS_INT_TP 0x0002 /* Integrated USB TouchPad */
#define USB_DEVICE_ID_SYNAPTICS_CPAD 0x0003 /* Synaptics cPad */
#define USB_DEVICE_ID_SYNAPTICS_TS 0x0006 /* Synaptics TouchScreen */
#define USB_DEVICE_ID_SYNAPTICS_STICK 0x0007 /* Synaptics USB Styk */
#define USB_DEVICE_ID_SYNAPTICS_WP 0x0008 /* Synaptics USB WheelPad */
#define USB_DEVICE_ID_SYNAPTICS_COMP_TP 0x0009 /* Composite USB TouchPad */
#define USB_DEVICE_ID_SYNAPTICS_WTP 0x0010 /* Wireless TouchPad */
#define USB_DEVICE_ID_SYNAPTICS_DPAD 0x0013 /* DisplayPad */
#define SYNUSB_TOUCHPAD (1 << 0)
#define SYNUSB_STICK (1 << 1)
#define SYNUSB_TOUCHSCREEN (1 << 2)
#define SYNUSB_AUXDISPLAY (1 << 3) /* For cPad */
#define SYNUSB_COMBO (1 << 4) /* Composite device (TP + stick) */
#define SYNUSB_IO_ALWAYS (1 << 5)
#define USB_DEVICE_SYNAPTICS(prod, kind) \
USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, \
USB_DEVICE_ID_SYNAPTICS_##prod), \
.driver_info = (kind),
#define SYNUSB_RECV_SIZE 8
#define XMIN_NOMINAL 1472
#define XMAX_NOMINAL 5472
#define YMIN_NOMINAL 1408
#define YMAX_NOMINAL 4448
struct synusb {
struct usb_device *udev;
struct usb_interface *intf;
struct urb *urb;
unsigned char *data;
/* serialize access to open/suspend */
struct mutex pm_mutex;
bool is_open;
/* input device related data structures */
struct input_dev *input;
char name[128];
char phys[64];
/* characteristics of the device */
unsigned long flags;
};
static void synusb_report_buttons(struct synusb *synusb)
{
struct input_dev *input_dev = synusb->input;
input_report_key(input_dev, BTN_LEFT, synusb->data[1] & 0x04);
input_report_key(input_dev, BTN_RIGHT, synusb->data[1] & 0x01);
input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x02);
}
static void synusb_report_stick(struct synusb *synusb)
{
struct input_dev *input_dev = synusb->input;
int x, y;
unsigned int pressure;
pressure = synusb->data[6];
x = (s16)(be16_to_cpup((__be16 *)&synusb->data[2]) << 3) >> 7;
y = (s16)(be16_to_cpup((__be16 *)&synusb->data[4]) << 3) >> 7;
if (pressure > 0) {
input_report_rel(input_dev, REL_X, x);
input_report_rel(input_dev, REL_Y, -y);
}
input_report_abs(input_dev, ABS_PRESSURE, pressure);
synusb_report_buttons(synusb);
input_sync(input_dev);
}
static void synusb_report_touchpad(struct synusb *synusb)
{
struct input_dev *input_dev = synusb->input;
unsigned int num_fingers, tool_width;
unsigned int x, y;
unsigned int pressure, w;
pressure = synusb->data[6];
x = be16_to_cpup((__be16 *)&synusb->data[2]);
y = be16_to_cpup((__be16 *)&synusb->data[4]);
w = synusb->data[0] & 0x0f;
if (pressure > 0) {
num_fingers = 1;
tool_width = 5;
switch (w) {
case 0 ... 1:
num_fingers = 2 + w;
break;
case 2: /* pen, pretend its a finger */
break;
case 4 ... 15:
tool_width = w;
break;
}
} else {
num_fingers = 0;
tool_width = 0;
}
/*
* Post events
* BTN_TOUCH has to be first as mousedev relies on it when doing
* absolute -> relative conversion
*/
if (pressure > 30)
input_report_key(input_dev, BTN_TOUCH, 1);
if (pressure < 25)
input_report_key(input_dev, BTN_TOUCH, 0);
if (num_fingers > 0) {
input_report_abs(input_dev, ABS_X, x);
input_report_abs(input_dev, ABS_Y,
YMAX_NOMINAL + YMIN_NOMINAL - y);
}
input_report_abs(input_dev, ABS_PRESSURE, pressure);
input_report_abs(input_dev, ABS_TOOL_WIDTH, tool_width);
input_report_key(input_dev, BTN_TOOL_FINGER, num_fingers == 1);
input_report_key(input_dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
input_report_key(input_dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
synusb_report_buttons(synusb);
if (synusb->flags & SYNUSB_AUXDISPLAY)
input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x08);
input_sync(input_dev);
}
static void synusb_irq(struct urb *urb)
{
struct synusb *synusb = urb->context;
int error;
/* Check our status in case we need to bail out early. */
switch (urb->status) {
case 0:
usb_mark_last_busy(synusb->udev);
break;
/* Device went away so don't keep trying to read from it. */
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
return;
default:
goto resubmit;
break;
}
if (synusb->flags & SYNUSB_STICK)
synusb_report_stick(synusb);
else
synusb_report_touchpad(synusb);
resubmit:
error = usb_submit_urb(urb, GFP_ATOMIC);
if (error && error != -EPERM)
dev_err(&synusb->intf->dev,
"%s - usb_submit_urb failed with result: %d",
__func__, error);
}
static struct usb_endpoint_descriptor *
synusb_get_in_endpoint(struct usb_host_interface *iface)
{
struct usb_endpoint_descriptor *endpoint;
int i;
for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
endpoint = &iface->endpoint[i].desc;
if (usb_endpoint_is_int_in(endpoint)) {
/* we found our interrupt in endpoint */
return endpoint;
}
}
return NULL;
}
static int synusb_open(struct input_dev *dev)
{
struct synusb *synusb = input_get_drvdata(dev);
int retval;
retval = usb_autopm_get_interface(synusb->intf);
if (retval) {
dev_err(&synusb->intf->dev,
"%s - usb_autopm_get_interface failed, error: %d\n",
__func__, retval);
return retval;
}
mutex_lock(&synusb->pm_mutex);
retval = usb_submit_urb(synusb->urb, GFP_KERNEL);
if (retval) {
dev_err(&synusb->intf->dev,
"%s - usb_submit_urb failed, error: %d\n",
__func__, retval);
retval = -EIO;
goto out;
}
synusb->intf->needs_remote_wakeup = 1;
synusb->is_open = true;
out:
mutex_unlock(&synusb->pm_mutex);
usb_autopm_put_interface(synusb->intf);
return retval;
}
static void synusb_close(struct input_dev *dev)
{
struct synusb *synusb = input_get_drvdata(dev);
int autopm_error;
autopm_error = usb_autopm_get_interface(synusb->intf);
mutex_lock(&synusb->pm_mutex);
usb_kill_urb(synusb->urb);
synusb->intf->needs_remote_wakeup = 0;
synusb->is_open = false;
mutex_unlock(&synusb->pm_mutex);
if (!autopm_error)
usb_autopm_put_interface(synusb->intf);
}
static int synusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *ep;
struct synusb *synusb;
struct input_dev *input_dev;
unsigned int intf_num = intf->cur_altsetting->desc.bInterfaceNumber;
unsigned int altsetting = min(intf->num_altsetting, 1U);
int error;
error = usb_set_interface(udev, intf_num, altsetting);
if (error) {
dev_err(&udev->dev,
"Can not set alternate setting to %i, error: %i",
altsetting, error);
return error;
}
ep = synusb_get_in_endpoint(intf->cur_altsetting);
if (!ep)
return -ENODEV;
synusb = kzalloc(sizeof(*synusb), GFP_KERNEL);
input_dev = input_allocate_device();
if (!synusb || !input_dev) {
error = -ENOMEM;
goto err_free_mem;
}
synusb->udev = udev;
synusb->intf = intf;
synusb->input = input_dev;
mutex_init(&synusb->pm_mutex);
synusb->flags = id->driver_info;
if (synusb->flags & SYNUSB_COMBO) {
/*
* This is a combo device, we need to set proper
* capability, depending on the interface.
*/
synusb->flags |= intf_num == 1 ?
SYNUSB_STICK : SYNUSB_TOUCHPAD;
}
synusb->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!synusb->urb) {
error = -ENOMEM;
goto err_free_mem;
}
synusb->data = usb_alloc_coherent(udev, SYNUSB_RECV_SIZE, GFP_KERNEL,
&synusb->urb->transfer_dma);
if (!synusb->data) {
error = -ENOMEM;
goto err_free_urb;
}
usb_fill_int_urb(synusb->urb, udev,
usb_rcvintpipe(udev, ep->bEndpointAddress),
synusb->data, SYNUSB_RECV_SIZE,
synusb_irq, synusb,
ep->bInterval);
synusb->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (udev->manufacturer)
strlcpy(synusb->name, udev->manufacturer,
sizeof(synusb->name));
if (udev->product) {
if (udev->manufacturer)
strlcat(synusb->name, " ", sizeof(synusb->name));
strlcat(synusb->name, udev->product, sizeof(synusb->name));
}
if (!strlen(synusb->name))
snprintf(synusb->name, sizeof(synusb->name),
"USB Synaptics Device %04x:%04x",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
if (synusb->flags & SYNUSB_STICK)
strlcat(synusb->name, " (Stick)", sizeof(synusb->name));
usb_make_path(udev, synusb->phys, sizeof(synusb->phys));
strlcat(synusb->phys, "/input0", sizeof(synusb->phys));
input_dev->name = synusb->name;
input_dev->phys = synusb->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &synusb->intf->dev;
if (!(synusb->flags & SYNUSB_IO_ALWAYS)) {
input_dev->open = synusb_open;
input_dev->close = synusb_close;
}
input_set_drvdata(input_dev, synusb);
__set_bit(EV_ABS, input_dev->evbit);
__set_bit(EV_KEY, input_dev->evbit);
if (synusb->flags & SYNUSB_STICK) {
__set_bit(EV_REL, input_dev->evbit);
__set_bit(REL_X, input_dev->relbit);
__set_bit(REL_Y, input_dev->relbit);
__set_bit(INPUT_PROP_POINTING_STICK, input_dev->propbit);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0);
} else {
input_set_abs_params(input_dev, ABS_X,
XMIN_NOMINAL, XMAX_NOMINAL, 0, 0);
input_set_abs_params(input_dev, ABS_Y,
YMIN_NOMINAL, YMAX_NOMINAL, 0, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
}
if (synusb->flags & SYNUSB_TOUCHSCREEN)
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
else
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
__set_bit(BTN_MIDDLE, input_dev->keybit);
usb_set_intfdata(intf, synusb);
if (synusb->flags & SYNUSB_IO_ALWAYS) {
error = synusb_open(input_dev);
if (error)
goto err_free_dma;
}
error = input_register_device(input_dev);
if (error) {
dev_err(&udev->dev,
"Failed to register input device, error %d\n",
error);
goto err_stop_io;
}
return 0;
err_stop_io:
if (synusb->flags & SYNUSB_IO_ALWAYS)
synusb_close(synusb->input);
err_free_dma:
usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data,
synusb->urb->transfer_dma);
err_free_urb:
usb_free_urb(synusb->urb);
err_free_mem:
input_free_device(input_dev);
kfree(synusb);
usb_set_intfdata(intf, NULL);
return error;
}
static void synusb_disconnect(struct usb_interface *intf)
{
struct synusb *synusb = usb_get_intfdata(intf);
struct usb_device *udev = interface_to_usbdev(intf);
if (synusb->flags & SYNUSB_IO_ALWAYS)
synusb_close(synusb->input);
input_unregister_device(synusb->input);
usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data,
synusb->urb->transfer_dma);
usb_free_urb(synusb->urb);
kfree(synusb);
usb_set_intfdata(intf, NULL);
}
static int synusb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct synusb *synusb = usb_get_intfdata(intf);
mutex_lock(&synusb->pm_mutex);
usb_kill_urb(synusb->urb);
mutex_unlock(&synusb->pm_mutex);
return 0;
}
static int synusb_resume(struct usb_interface *intf)
{
struct synusb *synusb = usb_get_intfdata(intf);
int retval = 0;
mutex_lock(&synusb->pm_mutex);
if ((synusb->is_open || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
retval = -EIO;
}
mutex_unlock(&synusb->pm_mutex);
return retval;
}
static int synusb_pre_reset(struct usb_interface *intf)
{
struct synusb *synusb = usb_get_intfdata(intf);
mutex_lock(&synusb->pm_mutex);
usb_kill_urb(synusb->urb);
return 0;
}
static int synusb_post_reset(struct usb_interface *intf)
{
struct synusb *synusb = usb_get_intfdata(intf);
int retval = 0;
if ((synusb->is_open || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
retval = -EIO;
}
mutex_unlock(&synusb->pm_mutex);
return retval;
}
static int synusb_reset_resume(struct usb_interface *intf)
{
return synusb_resume(intf);
}
static const struct usb_device_id synusb_idtable[] = {
{ USB_DEVICE_SYNAPTICS(TP, SYNUSB_TOUCHPAD) },
{ USB_DEVICE_SYNAPTICS(INT_TP, SYNUSB_TOUCHPAD) },
{ USB_DEVICE_SYNAPTICS(CPAD,
SYNUSB_TOUCHPAD | SYNUSB_AUXDISPLAY | SYNUSB_IO_ALWAYS) },
{ USB_DEVICE_SYNAPTICS(TS, SYNUSB_TOUCHSCREEN) },
{ USB_DEVICE_SYNAPTICS(STICK, SYNUSB_STICK) },
{ USB_DEVICE_SYNAPTICS(WP, SYNUSB_TOUCHPAD) },
{ USB_DEVICE_SYNAPTICS(COMP_TP, SYNUSB_COMBO) },
{ USB_DEVICE_SYNAPTICS(WTP, SYNUSB_TOUCHPAD) },
{ USB_DEVICE_SYNAPTICS(DPAD, SYNUSB_TOUCHPAD) },
{ }
};
MODULE_DEVICE_TABLE(usb, synusb_idtable);
static struct usb_driver synusb_driver = {
.name = "synaptics_usb",
.probe = synusb_probe,
.disconnect = synusb_disconnect,
.id_table = synusb_idtable,
.suspend = synusb_suspend,
.resume = synusb_resume,
.pre_reset = synusb_pre_reset,
.post_reset = synusb_post_reset,
.reset_resume = synusb_reset_resume,
.supports_autosuspend = 1,
};
module_usb_driver(synusb_driver);
MODULE_AUTHOR("Rob Miller <rob@inpharmatica.co.uk>, "
"Ron Lee <ron@debian.org>, "
"Jan Steinhoff <cpad@jan-steinhoff.de>");
MODULE_DESCRIPTION("Synaptics USB device driver");
MODULE_LICENSE("GPL");