swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: cfaf025112d3856637ff34a767ef785ef5cf2ca9 authored by Linus Torvalds on 09 June 2012, 01:40:09 UTC
Linux 3.5-rc2
Linux 3.5-rc2
Tip revision: cfaf025
ps3rom.c
/*
* PS3 BD/DVD/CD-ROM Storage Driver
*
* Copyright (C) 2007 Sony Computer Entertainment Inc.
* Copyright 2007 Sony Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published
* by the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/cdrom.h>
#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_eh.h>
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
#define DEVICE_NAME "ps3rom"
#define BOUNCE_SIZE (64*1024)
#define PS3ROM_MAX_SECTORS (BOUNCE_SIZE >> 9)
struct ps3rom_private {
struct ps3_storage_device *dev;
struct scsi_cmnd *curr_cmd;
};
#define LV1_STORAGE_SEND_ATAPI_COMMAND (1)
struct lv1_atapi_cmnd_block {
u8 pkt[32]; /* packet command block */
u32 pktlen; /* should be 12 for ATAPI 8020 */
u32 blocks;
u32 block_size;
u32 proto; /* transfer mode */
u32 in_out; /* transfer direction */
u64 buffer; /* parameter except command block */
u32 arglen; /* length above */
};
enum lv1_atapi_proto {
NON_DATA_PROTO = 0,
PIO_DATA_IN_PROTO = 1,
PIO_DATA_OUT_PROTO = 2,
DMA_PROTO = 3
};
enum lv1_atapi_in_out {
DIR_WRITE = 0, /* memory -> device */
DIR_READ = 1 /* device -> memory */
};
static int ps3rom_slave_configure(struct scsi_device *scsi_dev)
{
struct ps3rom_private *priv = shost_priv(scsi_dev->host);
struct ps3_storage_device *dev = priv->dev;
dev_dbg(&dev->sbd.core, "%s:%u: id %u, lun %u, channel %u\n", __func__,
__LINE__, scsi_dev->id, scsi_dev->lun, scsi_dev->channel);
/*
* ATAPI SFF8020 devices use MODE_SENSE_10,
* so we can prohibit MODE_SENSE_6
*/
scsi_dev->use_10_for_ms = 1;
/* we don't support {READ,WRITE}_6 */
scsi_dev->use_10_for_rw = 1;
return 0;
}
static int ps3rom_atapi_request(struct ps3_storage_device *dev,
struct scsi_cmnd *cmd)
{
struct lv1_atapi_cmnd_block atapi_cmnd;
unsigned char opcode = cmd->cmnd[0];
int res;
u64 lpar;
dev_dbg(&dev->sbd.core, "%s:%u: send ATAPI command 0x%02x\n", __func__,
__LINE__, opcode);
memset(&atapi_cmnd, 0, sizeof(struct lv1_atapi_cmnd_block));
memcpy(&atapi_cmnd.pkt, cmd->cmnd, 12);
atapi_cmnd.pktlen = 12;
atapi_cmnd.block_size = 1; /* transfer size is block_size * blocks */
atapi_cmnd.blocks = atapi_cmnd.arglen = scsi_bufflen(cmd);
atapi_cmnd.buffer = dev->bounce_lpar;
switch (cmd->sc_data_direction) {
case DMA_FROM_DEVICE:
if (scsi_bufflen(cmd) >= CD_FRAMESIZE)
atapi_cmnd.proto = DMA_PROTO;
else
atapi_cmnd.proto = PIO_DATA_IN_PROTO;
atapi_cmnd.in_out = DIR_READ;
break;
case DMA_TO_DEVICE:
if (scsi_bufflen(cmd) >= CD_FRAMESIZE)
atapi_cmnd.proto = DMA_PROTO;
else
atapi_cmnd.proto = PIO_DATA_OUT_PROTO;
atapi_cmnd.in_out = DIR_WRITE;
scsi_sg_copy_to_buffer(cmd, dev->bounce_buf, dev->bounce_size);
break;
default:
atapi_cmnd.proto = NON_DATA_PROTO;
break;
}
lpar = ps3_mm_phys_to_lpar(__pa(&atapi_cmnd));
res = lv1_storage_send_device_command(dev->sbd.dev_id,
LV1_STORAGE_SEND_ATAPI_COMMAND,
lpar, sizeof(atapi_cmnd),
atapi_cmnd.buffer,
atapi_cmnd.arglen, &dev->tag);
if (res == LV1_DENIED_BY_POLICY) {
dev_dbg(&dev->sbd.core,
"%s:%u: ATAPI command 0x%02x denied by policy\n",
__func__, __LINE__, opcode);
return DID_ERROR << 16;
}
if (res) {
dev_err(&dev->sbd.core,
"%s:%u: ATAPI command 0x%02x failed %d\n", __func__,
__LINE__, opcode, res);
return DID_ERROR << 16;
}
return 0;
}
static inline unsigned int srb10_lba(const struct scsi_cmnd *cmd)
{
return cmd->cmnd[2] << 24 | cmd->cmnd[3] << 16 | cmd->cmnd[4] << 8 |
cmd->cmnd[5];
}
static inline unsigned int srb10_len(const struct scsi_cmnd *cmd)
{
return cmd->cmnd[7] << 8 | cmd->cmnd[8];
}
static int ps3rom_read_request(struct ps3_storage_device *dev,
struct scsi_cmnd *cmd, u32 start_sector,
u32 sectors)
{
int res;
dev_dbg(&dev->sbd.core, "%s:%u: read %u sectors starting at %u\n",
__func__, __LINE__, sectors, start_sector);
res = lv1_storage_read(dev->sbd.dev_id,
dev->regions[dev->region_idx].id, start_sector,
sectors, 0, dev->bounce_lpar, &dev->tag);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: read failed %d\n", __func__,
__LINE__, res);
return DID_ERROR << 16;
}
return 0;
}
static int ps3rom_write_request(struct ps3_storage_device *dev,
struct scsi_cmnd *cmd, u32 start_sector,
u32 sectors)
{
int res;
dev_dbg(&dev->sbd.core, "%s:%u: write %u sectors starting at %u\n",
__func__, __LINE__, sectors, start_sector);
scsi_sg_copy_to_buffer(cmd, dev->bounce_buf, dev->bounce_size);
res = lv1_storage_write(dev->sbd.dev_id,
dev->regions[dev->region_idx].id, start_sector,
sectors, 0, dev->bounce_lpar, &dev->tag);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: write failed %d\n", __func__,
__LINE__, res);
return DID_ERROR << 16;
}
return 0;
}
static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ps3rom_private *priv = shost_priv(cmd->device->host);
struct ps3_storage_device *dev = priv->dev;
unsigned char opcode;
int res;
#ifdef DEBUG
scsi_print_command(cmd);
#endif
priv->curr_cmd = cmd;
cmd->scsi_done = done;
opcode = cmd->cmnd[0];
/*
* While we can submit READ/WRITE SCSI commands as ATAPI commands,
* it's recommended for various reasons (performance, error handling,
* ...) to use lv1_storage_{read,write}() instead
*/
switch (opcode) {
case READ_10:
res = ps3rom_read_request(dev, cmd, srb10_lba(cmd),
srb10_len(cmd));
break;
case WRITE_10:
res = ps3rom_write_request(dev, cmd, srb10_lba(cmd),
srb10_len(cmd));
break;
default:
res = ps3rom_atapi_request(dev, cmd);
break;
}
if (res) {
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
cmd->result = res;
cmd->sense_buffer[0] = 0x70;
cmd->sense_buffer[2] = ILLEGAL_REQUEST;
priv->curr_cmd = NULL;
cmd->scsi_done(cmd);
}
return 0;
}
static DEF_SCSI_QCMD(ps3rom_queuecommand)
static int decode_lv1_status(u64 status, unsigned char *sense_key,
unsigned char *asc, unsigned char *ascq)
{
if (((status >> 24) & 0xff) != SAM_STAT_CHECK_CONDITION)
return -1;
*sense_key = (status >> 16) & 0xff;
*asc = (status >> 8) & 0xff;
*ascq = status & 0xff;
return 0;
}
static irqreturn_t ps3rom_interrupt(int irq, void *data)
{
struct ps3_storage_device *dev = data;
struct Scsi_Host *host;
struct ps3rom_private *priv;
struct scsi_cmnd *cmd;
int res;
u64 tag, status;
unsigned char sense_key, asc, ascq;
res = lv1_storage_get_async_status(dev->sbd.dev_id, &tag, &status);
/*
* status = -1 may mean that ATAPI transport completed OK, but
* ATAPI command itself resulted CHECK CONDITION
* so, upper layer should issue REQUEST_SENSE to check the sense data
*/
if (tag != dev->tag)
dev_err(&dev->sbd.core,
"%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
__func__, __LINE__, res, status);
return IRQ_HANDLED;
}
host = ps3_system_bus_get_drvdata(&dev->sbd);
priv = shost_priv(host);
cmd = priv->curr_cmd;
if (!status) {
/* OK, completed */
if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
int len;
len = scsi_sg_copy_from_buffer(cmd,
dev->bounce_buf,
dev->bounce_size);
scsi_set_resid(cmd, scsi_bufflen(cmd) - len);
}
cmd->result = DID_OK << 16;
goto done;
}
if (cmd->cmnd[0] == REQUEST_SENSE) {
/* SCSI spec says request sense should never get error */
dev_err(&dev->sbd.core, "%s:%u: end error without autosense\n",
__func__, __LINE__);
cmd->result = DID_ERROR << 16 | SAM_STAT_CHECK_CONDITION;
goto done;
}
if (decode_lv1_status(status, &sense_key, &asc, &ascq)) {
cmd->result = DID_ERROR << 16;
goto done;
}
scsi_build_sense_buffer(0, cmd->sense_buffer, sense_key, asc, ascq);
cmd->result = SAM_STAT_CHECK_CONDITION;
done:
priv->curr_cmd = NULL;
cmd->scsi_done(cmd);
return IRQ_HANDLED;
}
static struct scsi_host_template ps3rom_host_template = {
.name = DEVICE_NAME,
.slave_configure = ps3rom_slave_configure,
.queuecommand = ps3rom_queuecommand,
.can_queue = 1,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 1,
.emulated = 1, /* only sg driver uses this */
.max_sectors = PS3ROM_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.module = THIS_MODULE,
};
static int __devinit ps3rom_probe(struct ps3_system_bus_device *_dev)
{
struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
int error;
struct Scsi_Host *host;
struct ps3rom_private *priv;
if (dev->blk_size != CD_FRAMESIZE) {
dev_err(&dev->sbd.core,
"%s:%u: cannot handle block size %llu\n", __func__,
__LINE__, dev->blk_size);
return -EINVAL;
}
dev->bounce_size = BOUNCE_SIZE;
dev->bounce_buf = kmalloc(BOUNCE_SIZE, GFP_DMA);
if (!dev->bounce_buf)
return -ENOMEM;
error = ps3stor_setup(dev, ps3rom_interrupt);
if (error)
goto fail_free_bounce;
host = scsi_host_alloc(&ps3rom_host_template,
sizeof(struct ps3rom_private));
if (!host) {
dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed\n",
__func__, __LINE__);
goto fail_teardown;
}
priv = shost_priv(host);
ps3_system_bus_set_drvdata(&dev->sbd, host);
priv->dev = dev;
/* One device/LUN per SCSI bus */
host->max_id = 1;
host->max_lun = 1;
error = scsi_add_host(host, &dev->sbd.core);
if (error) {
dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed %d\n",
__func__, __LINE__, error);
error = -ENODEV;
goto fail_host_put;
}
scsi_scan_host(host);
return 0;
fail_host_put:
scsi_host_put(host);
ps3_system_bus_set_drvdata(&dev->sbd, NULL);
fail_teardown:
ps3stor_teardown(dev);
fail_free_bounce:
kfree(dev->bounce_buf);
return error;
}
static int ps3rom_remove(struct ps3_system_bus_device *_dev)
{
struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
struct Scsi_Host *host = ps3_system_bus_get_drvdata(&dev->sbd);
scsi_remove_host(host);
ps3stor_teardown(dev);
scsi_host_put(host);
ps3_system_bus_set_drvdata(&dev->sbd, NULL);
kfree(dev->bounce_buf);
return 0;
}
static struct ps3_system_bus_driver ps3rom = {
.match_id = PS3_MATCH_ID_STOR_ROM,
.core.name = DEVICE_NAME,
.core.owner = THIS_MODULE,
.probe = ps3rom_probe,
.remove = ps3rom_remove
};
static int __init ps3rom_init(void)
{
return ps3_system_bus_driver_register(&ps3rom);
}
static void __exit ps3rom_exit(void)
{
ps3_system_bus_driver_unregister(&ps3rom);
}
module_init(ps3rom_init);
module_exit(ps3rom_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PS3 BD/DVD/CD-ROM Storage Driver");
MODULE_AUTHOR("Sony Corporation");
MODULE_ALIAS(PS3_MODULE_ALIAS_STOR_ROM);