swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: f5412be599602124d2bdd49947b231dd77c0bf99 authored by Linus Torvalds on 22 February 2011, 01:25:52 UTC
Linux 2.6.38-rc6
Linux 2.6.38-rc6
Tip revision: f5412be
msscsi.c
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_device.h>
#include "usb.h"
#include "scsiglue.h"
#include "transport.h"
int MS_SCSI_Test_Unit_Ready (struct us_data *us, struct scsi_cmnd *srb);
int MS_SCSI_Inquiry (struct us_data *us, struct scsi_cmnd *srb);
int MS_SCSI_Mode_Sense (struct us_data *us, struct scsi_cmnd *srb);
int MS_SCSI_Start_Stop (struct us_data *us, struct scsi_cmnd *srb);
int MS_SCSI_Read_Capacity (struct us_data *us, struct scsi_cmnd *srb);
int MS_SCSI_Read (struct us_data *us, struct scsi_cmnd *srb);
int MS_SCSI_Write (struct us_data *us, struct scsi_cmnd *srb);
//----- MS_SCSIIrp() --------------------------------------------------
int MS_SCSIIrp(struct us_data *us, struct scsi_cmnd *srb)
{
int result;
us->SrbStatus = SS_SUCCESS;
switch (srb->cmnd[0])
{
case TEST_UNIT_READY : result = MS_SCSI_Test_Unit_Ready (us, srb); break; //0x00
case INQUIRY : result = MS_SCSI_Inquiry (us, srb); break; //0x12
case MODE_SENSE : result = MS_SCSI_Mode_Sense (us, srb); break; //0x1A
case READ_CAPACITY : result = MS_SCSI_Read_Capacity (us, srb); break; //0x25
case READ_10 : result = MS_SCSI_Read (us, srb); break; //0x28
case WRITE_10 : result = MS_SCSI_Write (us, srb); break; //0x2A
default:
us->SrbStatus = SS_ILLEGAL_REQUEST;
result = USB_STOR_TRANSPORT_FAILED;
break;
}
return result;
}
//----- MS_SCSI_Test_Unit_Ready() --------------------------------------------------
int MS_SCSI_Test_Unit_Ready(struct us_data *us, struct scsi_cmnd *srb)
{
//printk("MS_SCSI_Test_Unit_Ready\n");
if (us->MS_Status.Insert && us->MS_Status.Ready)
return USB_STOR_TRANSPORT_GOOD;
else
{
ENE_MSInit(us);
return USB_STOR_TRANSPORT_GOOD;
}
return USB_STOR_TRANSPORT_GOOD;
}
//----- MS_SCSI_Inquiry() --------------------------------------------------
int MS_SCSI_Inquiry(struct us_data *us, struct scsi_cmnd *srb)
{
//printk("MS_SCSI_Inquiry\n");
BYTE data_ptr[36] = {0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55, 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61, 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30};
usb_stor_set_xfer_buf(us, data_ptr, 36, srb, TO_XFER_BUF);
return USB_STOR_TRANSPORT_GOOD;
}
//----- MS_SCSI_Mode_Sense() --------------------------------------------------
int MS_SCSI_Mode_Sense(struct us_data *us, struct scsi_cmnd *srb)
{
BYTE mediaNoWP[12] = {0x0b,0x00,0x00,0x08,0x00,0x00,0x71,0xc0,0x00,0x00,0x02,0x00};
BYTE mediaWP[12] = {0x0b,0x00,0x80,0x08,0x00,0x00,0x71,0xc0,0x00,0x00,0x02,0x00};
if (us->MS_Status.WtP)
usb_stor_set_xfer_buf(us, mediaWP, 12, srb, TO_XFER_BUF);
else
usb_stor_set_xfer_buf(us, mediaNoWP, 12, srb, TO_XFER_BUF);
return USB_STOR_TRANSPORT_GOOD;
}
//----- MS_SCSI_Read_Capacity() --------------------------------------------------
int MS_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb)
{
unsigned int offset = 0;
struct scatterlist *sg = NULL;
DWORD bl_num;
WORD bl_len;
BYTE buf[8];
printk("MS_SCSI_Read_Capacity\n");
bl_len = 0x200;
if ( us->MS_Status.IsMSPro )
bl_num = us->MSP_TotalBlock - 1;
else
bl_num = us->MS_Lib.NumberOfLogBlock * us->MS_Lib.blockSize * 2 - 1;
us->bl_num = bl_num;
printk("bl_len = %x\n", bl_len);
printk("bl_num = %x\n", bl_num);
//srb->request_bufflen = 8;
buf[0] = (bl_num>>24) & 0xff;
buf[1] = (bl_num>>16) & 0xff;
buf[2] = (bl_num>> 8) & 0xff;
buf[3] = (bl_num>> 0) & 0xff;
buf[4] = (bl_len>>24) & 0xff;
buf[5] = (bl_len>>16) & 0xff;
buf[6] = (bl_len>> 8) & 0xff;
buf[7] = (bl_len>> 0) & 0xff;
usb_stor_access_xfer_buf(us, buf, 8, srb, &sg, &offset, TO_XFER_BUF);
//usb_stor_set_xfer_buf(us, buf, srb->request_bufflen, srb, TO_XFER_BUF);
return USB_STOR_TRANSPORT_GOOD;
}
//----- MS_SCSI_Read() --------------------------------------------------
int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result=0;
PBYTE Cdb = srb->cmnd;
DWORD bn = ((Cdb[2]<<24) & 0xff000000) | ((Cdb[3]<<16) & 0x00ff0000) |
((Cdb[4]<< 8) & 0x0000ff00) | ((Cdb[5]<< 0) & 0x000000ff);
WORD blen = ((Cdb[7]<< 8) & 0xff00) | ((Cdb[8]<< 0) & 0x00ff);
DWORD blenByte = blen * 0x200;
//printk("SCSIOP_READ --- bn = %X, blen = %X, srb->use_sg = %X\n", bn, blen, srb->use_sg);
if (bn > us->bl_num)
return USB_STOR_TRANSPORT_ERROR;
if (us->MS_Status.IsMSPro)
{
result = ENE_LoadBinCode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
printk("Load MSP RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
// set up the command wrapper
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = blenByte;
bcb->Flags = 0x80;
bcb->CDB[0] = 0xF1;
bcb->CDB[1] = 0x02;
bcb->CDB[5] = (BYTE)(bn);
bcb->CDB[4] = (BYTE)(bn>>8);
bcb->CDB[3] = (BYTE)(bn>>16);
bcb->CDB[2] = (BYTE)(bn>>24);
result = ENE_SendScsiCmd(us, FDIR_READ, scsi_sglist(srb), 1);
}
else
{
void *buf;
int offset=0;
WORD phyblk, logblk;
BYTE PageNum;
WORD len;
DWORD blkno;
buf = kmalloc(blenByte, GFP_KERNEL);
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
result = ENE_LoadBinCode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
printk("Load MS RW pattern Fail !!\n");
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
logblk = (WORD)(bn / us->MS_Lib.PagesPerBlock);
PageNum = (BYTE)(bn % us->MS_Lib.PagesPerBlock);
while(1)
{
if (blen > (us->MS_Lib.PagesPerBlock-PageNum) )
len = us->MS_Lib.PagesPerBlock-PageNum;
else
len = blen;
phyblk = MS_LibConv2Physical(us, logblk);
blkno = phyblk * 0x20 + PageNum;
// set up the command wrapper
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = 0x200 * len;
bcb->Flags = 0x80;
bcb->CDB[0] = 0xF1;
bcb->CDB[1] = 0x02;
bcb->CDB[5] = (BYTE)(blkno);
bcb->CDB[4] = (BYTE)(blkno>>8);
bcb->CDB[3] = (BYTE)(blkno>>16);
bcb->CDB[2] = (BYTE)(blkno>>24);
result = ENE_SendScsiCmd(us, FDIR_READ, buf+offset, 0);
if (result != USB_STOR_XFER_GOOD)
{
printk("MS_SCSI_Read --- result = %x\n", result);
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
blen -= len;
if (blen<=0)
break;
logblk++;
PageNum = 0;
offset += MS_BYTES_PER_PAGE*len;
}
usb_stor_set_xfer_buf(us, buf, blenByte, srb, TO_XFER_BUF);
exit:
kfree(buf);
}
return result;
}
//----- MS_SCSI_Write() --------------------------------------------------
int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result=0;
PBYTE Cdb = srb->cmnd;
DWORD bn = ((Cdb[2]<<24) & 0xff000000) | ((Cdb[3]<<16) & 0x00ff0000) |
((Cdb[4]<< 8) & 0x0000ff00) | ((Cdb[5]<< 0) & 0x000000ff);
WORD blen = ((Cdb[7]<< 8) & 0xff00) | ((Cdb[8]<< 0) & 0x00ff);
DWORD blenByte = blen * 0x200;
if (bn > us->bl_num)
return USB_STOR_TRANSPORT_ERROR;
if (us->MS_Status.IsMSPro)
{
result = ENE_LoadBinCode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
printk("Load MSP RW pattern Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
// set up the command wrapper
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = blenByte;
bcb->Flags = 0x00;
bcb->CDB[0] = 0xF0;
bcb->CDB[1] = 0x04;
bcb->CDB[5] = (BYTE)(bn);
bcb->CDB[4] = (BYTE)(bn>>8);
bcb->CDB[3] = (BYTE)(bn>>16);
bcb->CDB[2] = (BYTE)(bn>>24);
result = ENE_SendScsiCmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
}
else
{
void *buf;
int offset=0;
WORD PhyBlockAddr;
BYTE PageNum;
DWORD result;
WORD len, oldphy, newphy;
buf = kmalloc(blenByte, GFP_KERNEL);
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
usb_stor_set_xfer_buf(us, buf, blenByte, srb, FROM_XFER_BUF);
result = ENE_LoadBinCode(us, MS_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD)
{
printk("Load MS RW pattern Fail !!\n");
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
PhyBlockAddr = (WORD)(bn / us->MS_Lib.PagesPerBlock);
PageNum = (BYTE)(bn % us->MS_Lib.PagesPerBlock);
while(1)
{
if (blen > (us->MS_Lib.PagesPerBlock-PageNum) )
len = us->MS_Lib.PagesPerBlock-PageNum;
else
len = blen;
oldphy = MS_LibConv2Physical(us, PhyBlockAddr);
newphy = MS_LibSearchBlockFromLogical(us, PhyBlockAddr);
result = MS_ReaderCopyBlock(us, oldphy, newphy, PhyBlockAddr, PageNum, buf+offset, len);
if (result != USB_STOR_XFER_GOOD)
{
printk("MS_SCSI_Write --- result = %x\n", result);
result = USB_STOR_TRANSPORT_ERROR;
goto exit;
}
us->MS_Lib.Phy2LogMap[oldphy] = MS_LB_NOT_USED_ERASED;
MS_LibForceSetLogicalPair(us, PhyBlockAddr, newphy);
blen -= len;
if (blen<=0)
break;
PhyBlockAddr++;
PageNum = 0;
offset += MS_BYTES_PER_PAGE*len;
}
exit:
kfree(buf);
}
return result;
}