swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: 17b57b1883c1285f3d0dc2266e8f79286a7bef38 authored by Greg Kroah-Hartman on 30 September 2018, 14:15:35 UTC
Linux 4.19-rc6
Linux 4.19-rc6
Tip revision: 17b57b1
devfreq_cooling.h
/*
* devfreq_cooling: Thermal cooling device implementation for devices using
* devfreq
*
* Copyright (C) 2014-2015 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __DEVFREQ_COOLING_H__
#define __DEVFREQ_COOLING_H__
#include <linux/devfreq.h>
#include <linux/thermal.h>
/**
* struct devfreq_cooling_power - Devfreq cooling power ops
* @get_static_power: Take voltage, in mV, and return the static power
* in mW. If NULL, the static power is assumed
* to be 0.
* @get_dynamic_power: Take voltage, in mV, and frequency, in HZ, and
* return the dynamic power draw in mW. If NULL,
* a simple power model is used.
* @dyn_power_coeff: Coefficient for the simple dynamic power model in
* mW/(MHz mV mV).
* If get_dynamic_power() is NULL, then the
* dynamic power is calculated as
* @dyn_power_coeff * frequency * voltage^2
* @get_real_power: When this is set, the framework uses it to ask the
* device driver for the actual power.
* Some devices have more sophisticated methods
* (like power counters) to approximate the actual power
* that they use.
* This function provides more accurate data to the
* thermal governor. When the driver does not provide
* such function, framework just uses pre-calculated
* table and scale the power by 'utilization'
* (based on 'busy_time' and 'total_time' taken from
* devfreq 'last_status').
* The value returned by this function must be lower
* or equal than the maximum power value
* for the current state
* (which can be found in power_table[state]).
* When this interface is used, the power_table holds
* max total (static + dynamic) power value for each OPP.
*/
struct devfreq_cooling_power {
unsigned long (*get_static_power)(struct devfreq *devfreq,
unsigned long voltage);
unsigned long (*get_dynamic_power)(struct devfreq *devfreq,
unsigned long freq,
unsigned long voltage);
int (*get_real_power)(struct devfreq *df, u32 *power,
unsigned long freq, unsigned long voltage);
unsigned long dyn_power_coeff;
};
#ifdef CONFIG_DEVFREQ_THERMAL
struct thermal_cooling_device *
of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
struct devfreq_cooling_power *dfc_power);
struct thermal_cooling_device *
of_devfreq_cooling_register(struct device_node *np, struct devfreq *df);
struct thermal_cooling_device *devfreq_cooling_register(struct devfreq *df);
void devfreq_cooling_unregister(struct thermal_cooling_device *dfc);
#else /* !CONFIG_DEVFREQ_THERMAL */
struct thermal_cooling_device *
of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
struct devfreq_cooling_power *dfc_power)
{
return ERR_PTR(-EINVAL);
}
static inline struct thermal_cooling_device *
of_devfreq_cooling_register(struct device_node *np, struct devfreq *df)
{
return ERR_PTR(-EINVAL);
}
static inline struct thermal_cooling_device *
devfreq_cooling_register(struct devfreq *df)
{
return ERR_PTR(-EINVAL);
}
static inline void
devfreq_cooling_unregister(struct thermal_cooling_device *dfc)
{
}
#endif /* CONFIG_DEVFREQ_THERMAL */
#endif /* __DEVFREQ_COOLING_H__ */