swh:1:snp:c3bf2749e3476071fa748f67b0ffa2fdc5fe49d9
Tip revision: 09b56adc98e0f8a21644fcb4d20ad367c3fceb55 authored by Linus Torvalds on 04 December 2007, 04:26:10 UTC
Linux 2.6.24-rc4
Linux 2.6.24-rc4
Tip revision: 09b56ad
main.c
/*
* kernel/power/main.c - PM subsystem core functionality.
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
*
* This file is released under the GPLv2
*
*/
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/resume-trace.h>
#include <linux/freezer.h>
#include <linux/vmstat.h>
#include <linux/syscalls.h>
#include "power.h"
BLOCKING_NOTIFIER_HEAD(pm_chain_head);
DEFINE_MUTEX(pm_mutex);
#ifdef CONFIG_SUSPEND
/* This is just an arbitrary number */
#define FREE_PAGE_NUMBER (100)
static struct platform_suspend_ops *suspend_ops;
/**
* suspend_set_ops - Set the global suspend method table.
* @ops: Pointer to ops structure.
*/
void suspend_set_ops(struct platform_suspend_ops *ops)
{
mutex_lock(&pm_mutex);
suspend_ops = ops;
mutex_unlock(&pm_mutex);
}
/**
* suspend_valid_only_mem - generic memory-only valid callback
*
* Platform drivers that implement mem suspend only and only need
* to check for that in their .valid callback can use this instead
* of rolling their own .valid callback.
*/
int suspend_valid_only_mem(suspend_state_t state)
{
return state == PM_SUSPEND_MEM;
}
/**
* suspend_prepare - Do prep work before entering low-power state.
*
* This is common code that is called for each state that we're entering.
* Run suspend notifiers, allocate a console and stop all processes.
*/
static int suspend_prepare(void)
{
int error;
unsigned int free_pages;
if (!suspend_ops || !suspend_ops->enter)
return -EPERM;
error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
if (error)
goto Finish;
pm_prepare_console();
if (freeze_processes()) {
error = -EAGAIN;
goto Thaw;
}
free_pages = global_page_state(NR_FREE_PAGES);
if (free_pages < FREE_PAGE_NUMBER) {
pr_debug("PM: free some memory\n");
shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
if (nr_free_pages() < FREE_PAGE_NUMBER) {
error = -ENOMEM;
printk(KERN_ERR "PM: No enough memory\n");
}
}
if (!error)
return 0;
Thaw:
thaw_processes();
pm_restore_console();
Finish:
pm_notifier_call_chain(PM_POST_SUSPEND);
return error;
}
/* default implementation */
void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
{
local_irq_disable();
}
/* default implementation */
void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
{
local_irq_enable();
}
/**
* suspend_enter - enter the desired system sleep state.
* @state: state to enter
*
* This function should be called after devices have been suspended.
*/
static int suspend_enter(suspend_state_t state)
{
int error = 0;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
if ((error = device_power_down(PMSG_SUSPEND))) {
printk(KERN_ERR "Some devices failed to power down\n");
goto Done;
}
error = suspend_ops->enter(state);
device_power_up();
Done:
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
return error;
}
/**
* suspend_devices_and_enter - suspend devices and enter the desired system sleep
* state.
* @state: state to enter
*/
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
if (!suspend_ops)
return -ENOSYS;
if (suspend_ops->set_target) {
error = suspend_ops->set_target(state);
if (error)
return error;
}
suspend_console();
error = device_suspend(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "Some devices failed to suspend\n");
goto Resume_console;
}
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
goto Resume_devices;
}
error = disable_nonboot_cpus();
if (!error)
suspend_enter(state);
enable_nonboot_cpus();
if (suspend_ops->finish)
suspend_ops->finish();
Resume_devices:
device_resume();
Resume_console:
resume_console();
return error;
}
/**
* suspend_finish - Do final work before exiting suspend sequence.
*
* Call platform code to clean up, restart processes, and free the
* console that we've allocated. This is not called for suspend-to-disk.
*/
static void suspend_finish(void)
{
thaw_processes();
pm_restore_console();
pm_notifier_call_chain(PM_POST_SUSPEND);
}
static const char * const pm_states[PM_SUSPEND_MAX] = {
[PM_SUSPEND_STANDBY] = "standby",
[PM_SUSPEND_MEM] = "mem",
};
static inline int valid_state(suspend_state_t state)
{
/* All states need lowlevel support and need to be valid
* to the lowlevel implementation, no valid callback
* implies that none are valid. */
if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state))
return 0;
return 1;
}
/**
* enter_state - Do common work of entering low-power state.
* @state: pm_state structure for state we're entering.
*
* Make sure we're the only ones trying to enter a sleep state. Fail
* if someone has beat us to it, since we don't want anything weird to
* happen when we wake up.
* Then, do the setup for suspend, enter the state, and cleaup (after
* we've woken up).
*/
static int enter_state(suspend_state_t state)
{
int error;
if (!valid_state(state))
return -ENODEV;
if (!mutex_trylock(&pm_mutex))
return -EBUSY;
printk("Syncing filesystems ... ");
sys_sync();
printk("done.\n");
pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
if ((error = suspend_prepare()))
goto Unlock;
pr_debug("PM: Entering %s sleep\n", pm_states[state]);
error = suspend_devices_and_enter(state);
pr_debug("PM: Finishing wakeup.\n");
suspend_finish();
Unlock:
mutex_unlock(&pm_mutex);
return error;
}
/**
* pm_suspend - Externally visible function for suspending system.
* @state: Enumerated value of state to enter.
*
* Determine whether or not value is within range, get state
* structure, and enter (above).
*/
int pm_suspend(suspend_state_t state)
{
if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
return enter_state(state);
return -EINVAL;
}
EXPORT_SYMBOL(pm_suspend);
#endif /* CONFIG_SUSPEND */
decl_subsys(power,NULL,NULL);
/**
* state - control system power state.
*
* show() returns what states are supported, which is hard-coded to
* 'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and
* 'disk' (Suspend-to-Disk).
*
* store() accepts one of those strings, translates it into the
* proper enumerated value, and initiates a suspend transition.
*/
static ssize_t state_show(struct kset *kset, char *buf)
{
char *s = buf;
#ifdef CONFIG_SUSPEND
int i;
for (i = 0; i < PM_SUSPEND_MAX; i++) {
if (pm_states[i] && valid_state(i))
s += sprintf(s,"%s ", pm_states[i]);
}
#endif
#ifdef CONFIG_HIBERNATION
s += sprintf(s, "%s\n", "disk");
#else
if (s != buf)
/* convert the last space to a newline */
*(s-1) = '\n';
#endif
return (s - buf);
}
static ssize_t state_store(struct kset *kset, const char *buf, size_t n)
{
#ifdef CONFIG_SUSPEND
suspend_state_t state = PM_SUSPEND_STANDBY;
const char * const *s;
#endif
char *p;
int len;
int error = -EINVAL;
p = memchr(buf, '\n', n);
len = p ? p - buf : n;
/* First, check if we are requested to hibernate */
if (len == 4 && !strncmp(buf, "disk", len)) {
error = hibernate();
goto Exit;
}
#ifdef CONFIG_SUSPEND
for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++) {
if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
break;
}
if (state < PM_SUSPEND_MAX && *s)
error = enter_state(state);
#endif
Exit:
return error ? error : n;
}
power_attr(state);
#ifdef CONFIG_PM_TRACE
int pm_trace_enabled;
static ssize_t pm_trace_show(struct kset *kset, char *buf)
{
return sprintf(buf, "%d\n", pm_trace_enabled);
}
static ssize_t
pm_trace_store(struct kset *kset, const char *buf, size_t n)
{
int val;
if (sscanf(buf, "%d", &val) == 1) {
pm_trace_enabled = !!val;
return n;
}
return -EINVAL;
}
power_attr(pm_trace);
static struct attribute * g[] = {
&state_attr.attr,
&pm_trace_attr.attr,
NULL,
};
#else
static struct attribute * g[] = {
&state_attr.attr,
NULL,
};
#endif /* CONFIG_PM_TRACE */
static struct attribute_group attr_group = {
.attrs = g,
};
static int __init pm_init(void)
{
int error = subsystem_register(&power_subsys);
if (!error)
error = sysfs_create_group(&power_subsys.kobj,&attr_group);
return error;
}
core_initcall(pm_init);