swh:1:snp:d073d74c7347a0286d3fa08752be89b055ab46b3
Tip revision: e06ea92422ff5f8a5add2e52283f61e5236739a4 authored by cathazi on 04 April 2023, 12:29:39 UTC
Add files via upload
Add files via upload
Tip revision: e06ea92
get_tw_dir.m
function [TH_var_temp,TH_mean_temp,Rsq_var_temp,Rsq_mean_temp,Time_temp,Speed_sl_temp,Speed_sl_vi_temp,Distance_sl_temp] = get_tw_dir(data,sl_vi,sl,sl_dist,sl_vi_dist,SS_ROI_ind,ROI_ind,spatial_mask,affine,thresh_eve)
%% prep
% interpolate
xq = [1:0.01:size(data,2)];
data_i = interp1([1:size(data,2)],data',xq,'spline');data_i = data_i';
% set mean to timeseries to zero
data_is = data_i - mean(data_i,'all');
%% Get control points of the average
data_av = mean(data_is,1);
% get peaks and troughs on avg
[~,p_locs] = findpeaks(smoothdata(data_av)); % need smoothdata for surrogate data, check if also ok in real data, or if too smooth
[~,t_locs] = findpeaks(smoothdata(data_av*-1));
% get apmplitude threshold for peaks & throughs
eve = envelope(data_av);
eve(1:100) = NaN;eve(end-100:end) = NaN;
% if conditions are met
if length(p_locs) > 0 && length(t_locs) > 0 && (sum(eve(p_locs)>thresh_eve)>1 || sum(eve(t_locs)>thresh_eve)>1)
locs_av_info(:,1) = [p_locs,t_locs];% combine peaks and throughs
locs_av_info(:,2) = [ones(1,length(p_locs)),ones(1,length(t_locs))*-1];% binary identification
locs_av_info = sortrows(locs_av_info,1);
% get mid points between peak and through and vice versa (= boundaries for single voxels)
for i = 1:size(locs_av_info,1)-1
locs_temp(i)=round(mean([locs_av_info(i,1),locs_av_info(i+1,1)]));
end
locs_temp(end+1) = 1;locs_temp(end+1) = size(data_is,2);locs_temp = sort(locs_temp);
for i = 1:length(locs_av_info)
locs_av_info(i,3) = locs_temp(i);
locs_av_info(i,4) = locs_temp(i+1);
end
% % control figure
% figure;hold on;
% plot(data_is');
% plot(data_av,'k','Linewidth',2);
% plot([1 length(data_av)],[0 0],'k');
% for c = [1 3 4]
% for p = 1:length(locs_av_info)
% plot([locs_av_info(p,c) locs_av_info(p,c)],[min(data_av) max(data_av)],'k');
% end
% end
% axis tight;
%% Get control points for each voxel
for v = 1:size(data,1)
clear locs_ss_*
% get peak and through
for i = 1:size(locs_av_info,1)
if locs_av_info(i,2) == 1
[~,locs_temp] = max(data_is(v,locs_av_info(i,3):locs_av_info(i,4)));
else
[~,locs_temp] = min(data_is(v,locs_av_info(i,3):locs_av_info(i,4)));
end
locs_ss_1(i) = locs_temp+locs_av_info(i,3)-1;
end
% get mid points
for i = 1:length(locs_ss_1)-1
locs_ss_2(i) = round(mean([locs_ss_1(i),locs_ss_1(i+1)]));
end
locs_ss(v,:) = sort([locs_ss_1,locs_ss_2]);
end %voxel
% % control figure
% for i = 1:size(locs_ss,2)
% figure('units','normalized','outerposition',[0 0 1 1]);
% subplot(1,4,[1 3]);hold on;
% plot(data_is');
% plot(data_av,'k','Linewidth',2);
%
% for v = 1:size(data_is,1)
% plot([locs_ss(v,i) locs_ss(v,i)],[min(data_av) max(data_av)]);
% end
% axis tight;
%
% subplot(144);hold on;
% histogram(locs_ss(:,i));
% end
%%
% normalise each to the equivalent point obtained from the average
locs_av = unique(sort([locs_av_info(:,1)',locs_av_info(:,3)',locs_av_info(:,4)']));
locs_av(1) = [];locs_av(end) = [];
if size(locs_av,2) == size(locs_ss,2) % solve differently!
locs_rel = locs_av-locs_ss;
% threshold (i.e. only take points above envelope threshold)
locs_rel = locs_rel(:,eve(locs_av)>thresh_eve);
locs_av = locs_av(eve(locs_av)>thresh_eve); % for visualisation
% get gradient
for i = 1:size(locs_rel,2)
% separete linear regressions
for e = 1:3 %x,y,z
% get regression coefficient (i.e. slope)
[reg_coef,S] = polyfit(locs_rel(:,i),sl_vi.face_center(SS_ROI_ind(ROI_ind(spatial_mask)),e),1); % reg_coef1(t,e,1) = slope, reg_coef1(t,e,2) = intercept
pts(i,e,1) = 0; pts(i,e,2) = reg_coef(1);
% R-sqaure
Rsq(i,e) = 1 - (S.normr/norm(sl_vi.face_center(SS_ROI_ind(ROI_ind(spatial_mask)),e) - mean(sl_vi.face_center(SS_ROI_ind(ROI_ind(spatial_mask)),e))))^2;
end
% normalise points to MNI to allow grand average across
% subj.
pts_aff(i,:,:) = affine(1:3,1:3) * squeeze(pts(i,:,:)) + affine(1:3,4);
% % multiple regression
% [b,~,~,~,stats] = regress(locs_rel(:,i),[ones(size(locs_rel(:,i))),sl_vi.face_center(SS_ROI_ind(ROI_ind(spatial_mask)),1),sl_vi.face_center(SS_ROI_ind(ROI_ind(spatial_mask)),2)]);
% pts(i,[1 2],1) = [0 0];
% pts(i,[1 2],2) = [b(2) b(3)];
% % normalise points to MNI to allow grand average across
% % subj.
% pts_aff(i,:,:) = affine(1:2,1:2) * squeeze(pts(i,:,:)) + affine(1:2,4);
% Rsq(i,[1 2]) = [stats(1)];
% get speed
% get delta time
[val_min,idx_min] = min(locs_rel(:,i));
[val_max,idx_max] = max(locs_rel(:,i));
delta_time = (abs(val_min-val_max)/100)/300;% samples to sec
% get delta space
% not inflated
[a1,b1] = knnsearch(sl_dist.face_center(sl_dist.ROI_ind,:),sl.face_center(SS_ROI_ind(ROI_ind(spatial_mask([idx_min]))),:));
[a2,b2] = knnsearch(sl_dist.face_center(sl_dist.ROI_ind,:),sl.face_center(SS_ROI_ind(ROI_ind(spatial_mask([idx_max]))),:));
Distance_sl(i) = mean([sl_dist.dist_geo(a1,a2),sl_dist.dist_geo(a2,a1)])* 0.001; %mm to m
Speed_sl(i) = Distance_sl(i)/delta_time;
%speed_sl_euc(i) = (sl_dist.dist_euc(a1,a2)*0.001)/delta_time;
% inflated
[a1,b1] = knnsearch(sl_vi_dist.face_center(sl_vi_dist.ROI_ind,:),sl.face_center(SS_ROI_ind(ROI_ind(spatial_mask([idx_min]))),:));
[a2,b2] = knnsearch(sl_vi_dist.face_center(sl_vi_dist.ROI_ind,:),sl.face_center(SS_ROI_ind(ROI_ind(spatial_mask([idx_max]))),:));
temp = mean([sl_vi_dist.dist_geo(a1,a2),sl_vi_dist.dist_geo(a2,a1)])* 0.001; %mm to m
Speed_sl_vi(i) = temp/delta_time; %unit m/s
%speed.sl_vi_euc(i) = (sl_vi_dist.dist_euc(a1,a2)*0.001)/delta_time;
end
UVW = pts_aff(:,:,2)-pts_aff(:,:,1);
Rsq = mean(Rsq(:,1:2),2);% azimuth TH, elevation PHI
% focus only on TH in the following therefore average over x,y for Rsq only
%% get number of directions
% remove z direction
UVW_t = UVW(:,1:2);
% get length of 2D UVW
clear UVW_n
for t = 1:size(UVW,1)
UVW_n(t) = norm(UVW_t(t,:));
end
% get 2D unit vetors
UVW_u = (1./UVW_n)'.*UVW_t;
% remove outliers
UVW_in = isoutlier(UVW_u,'gesd');
UVW_in = sum(~UVW_in,2)==2;
UVW_u = UVW_u(UVW_in,:);
UVW = UVW(UVW_in,:);
Rsq = Rsq(UVW_in);
locs_av = locs_av(UVW_in);
locs_rel = locs_rel(:,UVW_in);
Speed_sl = Speed_sl(UVW_in);
Speed_sl_vi = Speed_sl_vi(UVW_in);
Distance_sl = Distance_sl(UVW_in);
%% cluster directions
% Spectral Clustering on Similarity Matrix
% Get distance between each pair of observations using the pdist and squareform functions with the default Euclidean distance metric
dist_temp = pdist(UVW_u);
dist = squareform(dist_temp);
% Construct the similarity matrix from the pairwise distance and check that the similarity matrix is symmetric
S = exp(-dist.^2);
if ~issymmetric(S)
TH_var_temp = NaN;
TH_mean_temp = NaN;
Rsq_var_temp = NaN;
Rsq_mean_temp = NaN;
Time_temp = NaN;
Speed_sl_temp = NaN;
Speed_sl_vi_temp = NaN;
Distance_sl_temp = NaN;
else
% Limit the similarity values to 0.7
S(S<0.7) = 0;
% Create graph object from S
G_eps = graph(S);
% Identify the number of connected groups
labels = conncomp(G_eps);
labels_uni = unique(labels);
% remove groups that are too small
for y = 1:length(labels_uni)
if sum(labels==labels_uni(y)) < length(labels)/(length(labels_uni)*2)
labels(labels==labels_uni(y)) = NaN;
end
end
labels_uni = unique(labels);
% sort based on when the direcetion occures in time
for y = 1:length(labels_uni(~isnan(labels_uni)))
y_time(y,1) = mean(locs_av(labels == labels_uni(y)));
y_time(y,2) = y;
end
y_time_order = sortrows(y_time,1);
% extract metrics per direction
for y = 1:size(y_time_order,1)
TH_temp = cart2sph(UVW_u(labels == y_time_order(y,2),1),UVW_u(labels == y_time_order(y,2),2),zeros(sum(labels == y_time_order(y,2)),1));
TH_var_temp(y) = circ_std(TH_temp);
TH_mean_temp(y) = circ_mean(TH_temp,UVW_n(labels == y_time_order(y,2))');
Rsq_var_temp(y) = std(Rsq(labels == y_time_order(y,2)));
Rsq_mean_temp(y) = mean(Rsq(labels == y_time_order(y,2)));
Time_temp(y) = y_time_order(y,1);
Speed_sl_temp(y) = mean(Speed_sl(labels == y_time_order(y,2)));
Speed_sl_vi_temp(y) = mean(Speed_sl_vi(labels == y_time_order(y,2)));
Distance_sl_temp(y) = mean(Distance_sl(labels == y_time_order(y,2)));
%[TH_mean2{c}(y),PHI{c}(y)] = cart2sph(mean(UVW(labels == labels_uni(y),1)),mean(UVW(labels == labels_uni(y),2)),mean(UVW(labels == labels_uni(y),3)));
end
% % control figure
% for i = 1:size(UVW,1)
% UVW_n(i) = norm(UVW(i,:));
% end
% [~,i_idx] = max(UVW_n);
% f1 = figure;
% subplot(2,2,1);hold on;
% plot(data_is');
%
% subplot(2,2,3);hold on;
% daspect manual;pbaspect manual
% plot([0 0],[-max(abs(pts(:,:,2)),[],'all') max(abs(pts(:,:,2)),[],'all')],'color',[0.4 0.4 0.4]);
% plot([-max(abs(pts(:,:,2)),[],'all') max(abs(pts(:,:,2)),[],'all')],[0 0],'color',[0.4 0.4 0.4]);
% arrow3(zeros(size(pts,1),3),pts(:,:,2),'k0.5',0.5,0.5);
% arrow3([0 0 0],pts(i_idx,:,2),'c2',1,1);
% arrow3([0 0 0],mean(pts(:,:,2),1),'m2',1,1);
% axis tight;axis square;view(0,90);
% %xticks([]);yticks([]);zticks([]);
%
% temp = nan(size(sl_vi.face_center,1),1);
% temp(SS_ROI_ind(ROI_ind(spatial_mask))) = locs_rel(:,i_idx);
% subplot(2,2,2);hold on;
% patch('Faces',sl_vi.faces,'Vertices',sl_vi.vertices,'FaceVertexCData',temp,'EdgeColor','none','FaceColor','flat');
% b = colorbar;b.Location = 'east';b.Label.String = 'Phase';
% view(0,90);
% util_resize_patch(sl_vi,SS_ROI_ind,ROI_ind(spatial_mask));
% xticks([]);yticks([]);zticks([]);
%
% temp(SS_ROI_ind(ROI_ind(spatial_mask))) = mean(locs_rel,2);
% subplot(2,2,4);hold on;
% patch('Faces',sl_vi.faces,'Vertices',sl_vi.vertices,'FaceVertexCData',temp,'EdgeColor','none','FaceColor','flat');
% b = colorbar;b.Location = 'east';b.Label.String = 'Phase';
% view(0,90);
% util_resize_patch(sl_vi,SS_ROI_ind,ROI_ind(spatial_mask));
% xticks([]);yticks([]);zticks([]);
% close(f1);
end
else
TH_var_temp = NaN;
TH_mean_temp = NaN;
Rsq_var_temp = NaN;
Rsq_mean_temp = NaN;
Time_temp = NaN;
Speed_sl_temp = NaN;
Speed_sl_vi_temp = NaN;
Distance_sl_temp = NaN;
end
else
TH_var_temp = NaN;
TH_mean_temp = NaN;
Rsq_var_temp = NaN;
Rsq_mean_temp = NaN;
Time_temp = NaN;
Speed_sl_temp = NaN;
Speed_sl_vi_temp = NaN;
Distance_sl_temp = NaN;
end