# This file is a part of Julia. License is MIT: http://julialang.org/license
## 1-dimensional ranges ##
abstract Range{T} <: AbstractArray{T,1}
## ordinal ranges
abstract OrdinalRange{T,S} <: Range{T}
abstract AbstractUnitRange{T} <: OrdinalRange{T,Int}
immutable StepRange{T,S} <: OrdinalRange{T,S}
start::T
step::S
stop::T
function StepRange(start::T, step::S, stop::T)
new(start, step, steprange_last(start,step,stop))
end
end
# to make StepRange constructor inlineable, so optimizer can see `step` value
function steprange_last{T}(start::T, step, stop)
if isa(start,AbstractFloat) || isa(step,AbstractFloat)
throw(ArgumentError("StepRange should not be used with floating point"))
end
z = zero(step)
step == z && throw(ArgumentError("step cannot be zero"))
if stop == start
last = stop
else
if (step > z) != (stop > start)
last = steprange_last_empty(start, step, stop)
else
diff = stop - start
if T<:Signed && (diff > zero(diff)) != (stop > start)
# handle overflowed subtraction with unsigned rem
if diff > zero(diff)
remain = -convert(T, unsigned(-diff) % step)
else
remain = convert(T, unsigned(diff) % step)
end
else
remain = steprem(start,stop,step)
end
last = stop - remain
end
end
last
end
function steprange_last_empty{T<:Integer}(start::T, step, stop)
# empty range has a special representation where stop = start-1
# this is needed to avoid the wrap-around that can happen computing
# start - step, which leads to a range that looks very large instead
# of empty.
if step > zero(step)
last = start - one(stop-start)
else
last = start + one(stop-start)
end
last
end
# For types where x+one(x) may not be well-defined
steprange_last_empty(start, step, stop) = start - step
steprem(start,stop,step) = (stop-start) % step
StepRange{T,S}(start::T, step::S, stop::T) = StepRange{T,S}(start, step, stop)
immutable UnitRange{T<:Real} <: AbstractUnitRange{T}
start::T
stop::T
UnitRange(start, stop) = new(start, unitrange_last(start,stop))
end
UnitRange{T<:Real}(start::T, stop::T) = UnitRange{T}(start, stop)
unitrange_last(::Bool, stop::Bool) = stop
unitrange_last{T<:Integer}(start::T, stop::T) =
ifelse(stop >= start, stop, convert(T,start-one(stop-start)))
unitrange_last{T}(start::T, stop::T) =
ifelse(stop >= start, convert(T,start+floor(stop-start)),
convert(T,start-one(stop-start)))
"""
Base.OneTo(n)
Define an `AbstractUnitRange` that behaves like `1:n`, with the added
distinction that the lower limit is guaranteed (by the type system) to
be 1.
"""
immutable OneTo{T<:Integer} <: AbstractUnitRange{T}
stop::T
OneTo(stop) = new(max(zero(T), stop))
end
OneTo{T<:Integer}(stop::T) = OneTo{T}(stop)
colon(a::Real, b::Real) = colon(promote(a,b)...)
colon{T<:Real}(start::T, stop::T) = UnitRange{T}(start, stop)
range(a::Real, len::Integer) = UnitRange{typeof(a)}(a, oftype(a, a+len-1))
colon{T}(start::T, stop::T) = StepRange(start, one(stop-start), stop)
range{T}(a::T, len::Integer) =
StepRange{T, typeof(a-a)}(a, one(a-a), a+oftype(a-a,(len-1)))
# first promote start and stop, leaving step alone
# this is for non-numeric ranges where step can be quite different
colon{A<:Real,C<:Real}(a::A, b, c::C) = colon(convert(promote_type(A,C),a), b, convert(promote_type(A,C),c))
colon{T<:Real}(start::T, step, stop::T) = StepRange(start, step, stop)
colon{T<:Real}(start::T, step::T, stop::T) = StepRange(start, step, stop)
colon{T<:Real}(start::T, step::Real, stop::T) = StepRange(promote(start, step, stop)...)
colon{T}(start::T, step, stop::T) = StepRange(start, step, stop)
range{T,S}(a::T, step::S, len::Integer) = StepRange{T,S}(a, step, convert(T, a+step*(len-1)))
## floating point ranges
immutable FloatRange{T<:AbstractFloat} <: Range{T}
start::T
step::T
len::T
divisor::T
end
FloatRange(a::AbstractFloat, s::AbstractFloat, l::Real, d::AbstractFloat) =
FloatRange{promote_type(typeof(a),typeof(s),typeof(d))}(a,s,l,d)
# float rationalization helper
function rat(x)
y = x
a = d = 1
b = c = 0
m = maxintfloat(Float32)
while abs(y) <= m
f = trunc(Int,y)
y -= f
a, c = f*a + c, a
b, d = f*b + d, b
max(abs(a),abs(b)) <= convert(Int,m) || return c, d
oftype(x,a)/oftype(x,b) == x && break
y = inv(y)
end
return a, b
end
function colon{T<:AbstractFloat}(start::T, step::T, stop::T)
step == 0 && throw(ArgumentError("range step cannot be zero"))
start == stop && return FloatRange{T}(start,step,1,1)
(0 < step) != (start < stop) && return FloatRange{T}(start,step,0,1)
# float range "lifting"
r = (stop-start)/step
n = round(r)
lo = prevfloat((prevfloat(stop)-nextfloat(start))/n)
hi = nextfloat((nextfloat(stop)-prevfloat(start))/n)
if lo <= step <= hi
a0, b = rat(start)
a = convert(T,a0)
if a/convert(T,b) == start
c0, d = rat(step)
c = convert(T,c0)
if c/convert(T,d) == step
e = lcm(b,d)
a *= div(e,b)
c *= div(e,d)
eT = convert(T,e)
if (a+n*c)/eT == stop
return FloatRange{T}(a, c, n+1, eT)
end
end
end
end
FloatRange{T}(start, step, floor(r)+1, one(step))
end
colon{T<:AbstractFloat}(a::T, b::T) = colon(a, one(a), b)
colon{T<:Real}(a::T, b::AbstractFloat, c::T) = colon(promote(a,b,c)...)
colon{T<:AbstractFloat}(a::T, b::AbstractFloat, c::T) = colon(promote(a,b,c)...)
colon{T<:AbstractFloat}(a::T, b::Real, c::T) = colon(promote(a,b,c)...)
range(a::AbstractFloat, len::Integer) = FloatRange(a,one(a),len,one(a))
range(a::AbstractFloat, st::AbstractFloat, len::Integer) = FloatRange(a,st,len,one(a))
range(a::Real, st::AbstractFloat, len::Integer) = FloatRange(float(a), st, len, one(st))
range(a::AbstractFloat, st::Real, len::Integer) = FloatRange(a, float(st), len, one(a))
## linspace and logspace
immutable LinSpace{T<:AbstractFloat} <: Range{T}
start::T
stop::T
len::T
divisor::T
end
function linspace{T<:AbstractFloat}(start::T, stop::T, len::T)
len == round(len) || throw(InexactError())
0 <= len || error("linspace($start, $stop, $len): negative length")
if len == 0
n = convert(T, 2)
if isinf(n*start) || isinf(n*stop)
start /= n; stop /= n; n = one(T)
end
return LinSpace(-start, -stop, -one(T), n)
end
if len == 1
start == stop || error("linspace($start, $stop, $len): endpoints differ")
return LinSpace(-start, -start, zero(T), one(T))
end
n = convert(T, len - 1)
len - n == 1 || error("linspace($start, $stop, $len): too long for $T")
a0, b = rat(start)
a = convert(T,a0)
if a/convert(T,b) == start
c0, d = rat(stop)
c = convert(T,c0)
if c/convert(T,d) == stop
e = lcm(b,d)
a *= div(e,b)
c *= div(e,d)
s = convert(T,n*e)
if isinf(a*n) || isinf(c*n)
s, p = frexp(s)
p2 = oftype(s,2)^p
a /= p2; c /= p2
end
if a*n/s == start && c*n/s == stop
return LinSpace(a, c, len, s)
end
end
end
a, c, s = start, stop, n
if isinf(a*n) || isinf(c*n)
s, p = frexp(s)
p2 = oftype(s,2)^p
a /= p2; c /= p2
end
if a*n/s == start && c*n/s == stop
return LinSpace(a, c, len, s)
end
return LinSpace(start, stop, len, n)
end
function linspace{T<:AbstractFloat}(start::T, stop::T, len::Real)
T_len = convert(T, len)
T_len == len || throw(InexactError())
linspace(start, stop, T_len)
end
linspace(start::Real, stop::Real, len::Real=50) =
linspace(promote(AbstractFloat(start), AbstractFloat(stop))..., len)
function show(io::IO, r::LinSpace)
print(io, "linspace(")
show(io, first(r))
print(io, ',')
show(io, last(r))
print(io, ',')
show(io, length(r))
print(io, ')')
end
"""
`print_range(io, r)` prints out a nice looking range r in terms of its elements
as if it were `collect(r)`, dependent on the size of the
terminal, and taking into account whether compact numbers should be shown.
It figures out the width in characters of each element, and if they
end up too wide, it shows the first and last elements separated by a
horizontal elipsis. Typical output will look like `1.0,2.0,3.0,…,4.0,5.0,6.0`.
`print_range(io, r, pre, sep, post, hdots)` uses optional
parameters `pre` and `post` characters for each printed row,
`sep` separator string between printed elements,
`hdots` string for the horizontal ellipsis.
"""
function print_range(io::IO, r::Range,
pre::AbstractString = " ",
sep::AbstractString = ",",
post::AbstractString = "",
hdots::AbstractString = ",\u2026,") # horiz ellipsis
# This function borrows from print_matrix() in show.jl
# and should be called by show and display
limit = get(io, :limit, false)
sz = displaysize(io)
if !haskey(io, :compact)
io = IOContext(io, compact=true)
end
screenheight, screenwidth = sz[1] - 4, sz[2]
screenwidth -= length(pre) + length(post)
postsp = ""
sepsize = length(sep)
m = 1 # treat the range as a one-row matrix
n = length(r)
# Figure out spacing alignments for r, but only need to examine the
# left and right edge columns, as many as could conceivably fit on the
# screen, with the middle columns summarized by horz, vert, or diag ellipsis
maxpossiblecols = div(screenwidth, 1+sepsize) # assume each element is at least 1 char + 1 separator
colsr = n <= maxpossiblecols ? (1:n) : [1:div(maxpossiblecols,2)+1; (n-div(maxpossiblecols,2)):n]
rowmatrix = r[colsr]' # treat the range as a one-row matrix for print_matrix_row
A = alignment(io, rowmatrix, 1:m, 1:length(rowmatrix), screenwidth, screenwidth, sepsize) # how much space range takes
if n <= length(A) # cols fit screen, so print out all elements
print(io, pre) # put in pre chars
print_matrix_row(io,rowmatrix,A,1,1:n,sep) # the entire range
print(io, post) # add the post characters
else # cols don't fit so put horiz ellipsis in the middle
# how many chars left after dividing width of screen in half
# and accounting for the horiz ellipsis
c = div(screenwidth-length(hdots)+1,2)+1 # chars remaining for each side of rowmatrix
alignR = reverse(alignment(io, rowmatrix, 1:m, length(rowmatrix):-1:1, c, c, sepsize)) # which cols of rowmatrix to put on the right
c = screenwidth - sum(map(sum,alignR)) - (length(alignR)-1)*sepsize - length(hdots)
alignL = alignment(io, rowmatrix, 1:m, 1:length(rowmatrix), c, c, sepsize) # which cols of rowmatrix to put on the left
print(io, pre) # put in pre chars
print_matrix_row(io, rowmatrix,alignL,1,1:length(alignL),sep) # left part of range
print(io, hdots) # horizontal ellipsis
print_matrix_row(io, rowmatrix,alignR,1,length(rowmatrix)-length(alignR)+1:length(rowmatrix),sep) # right part of range
print(io, post) # post chars
end
end
logspace(start::Real, stop::Real, n::Integer=50) = 10.^linspace(start, stop, n)
## interface implementations
size(r::Range) = (length(r),)
isempty(r::StepRange) =
(r.start != r.stop) & ((r.step > zero(r.step)) != (r.stop > r.start))
isempty(r::AbstractUnitRange) = first(r) > last(r)
isempty(r::FloatRange) = length(r) == 0
isempty(r::LinSpace) = length(r) == 0
"""
step(r)
Get the step size of a [`Range`](:obj:`Range`) object.
```jldoctest
julia> step(1:10)
1
julia> step(1:2:10)
2
julia> step(2.5:0.3:10.9)
0.3
julia> step(linspace(2.5,10.9,85))
0.1
```
"""
step(r::StepRange) = r.step
step(r::AbstractUnitRange) = 1
step(r::FloatRange) = r.step/r.divisor
step{T}(r::LinSpace{T}) = ifelse(r.len <= 0, convert(T,NaN), (r.stop-r.start)/r.divisor)
unsafe_length(r::Range) = length(r) # generic fallback
function unsafe_length(r::StepRange)
n = Integer(div(r.stop+r.step - r.start, r.step))
isempty(r) ? zero(n) : n
end
length(r::StepRange) = unsafe_length(r)
unsafe_length(r::AbstractUnitRange) = Integer(last(r) - first(r) + 1)
unsafe_length(r::OneTo) = r.stop
length(r::AbstractUnitRange) = unsafe_length(r)
length(r::OneTo) = unsafe_length(r)
length(r::FloatRange) = Integer(r.len)
length(r::LinSpace) = Integer(r.len + signbit(r.len - 1))
function length{T<:Union{Int,UInt,Int64,UInt64}}(r::StepRange{T})
isempty(r) && return zero(T)
if r.step > 1
return checked_add(convert(T, div(unsigned(r.stop - r.start), r.step)), one(T))
elseif r.step < -1
return checked_add(convert(T, div(unsigned(r.start - r.stop), -r.step)), one(T))
else
checked_add(div(checked_sub(r.stop, r.start), r.step), one(T))
end
end
length{T<:Union{Int,Int64}}(r::AbstractUnitRange{T}) =
checked_add(checked_sub(last(r), first(r)), one(T))
length{T<:Union{Int,Int64}}(r::OneTo{T}) = T(r.stop)
length{T<:Union{UInt,UInt64}}(r::AbstractUnitRange{T}) =
r.stop < r.start ? zero(T) : checked_add(last(r) - first(r), one(T))
# some special cases to favor default Int type
let smallint = (Int === Int64 ?
Union{Int8,UInt8,Int16,UInt16,Int32,UInt32} :
Union{Int8,UInt8,Int16,UInt16})
global length
function length{T <: smallint}(r::StepRange{T})
isempty(r) && return Int(0)
div(Int(r.stop)+Int(r.step) - Int(r.start), Int(r.step))
end
length{T <: smallint}(r::AbstractUnitRange{T}) = Int(last(r)) - Int(first(r)) + 1
length{T <: smallint}(r::OneTo{T}) = Int(r.stop)
end
first{T}(r::OrdinalRange{T}) = convert(T, r.start)
first{T}(r::OneTo{T}) = one(T)
first{T}(r::FloatRange{T}) = convert(T, r.start/r.divisor)
first{T}(r::LinSpace{T}) = convert(T, (r.len-1)*r.start/r.divisor)
last{T}(r::OrdinalRange{T}) = convert(T, r.stop)
last{T}(r::FloatRange{T}) = convert(T, (r.start + (r.len-1)*r.step)/r.divisor)
last{T}(r::LinSpace{T}) = convert(T, (r.len-1)*r.stop/r.divisor)
minimum(r::AbstractUnitRange) = isempty(r) ? throw(ArgumentError("range must be non-empty")) : first(r)
maximum(r::AbstractUnitRange) = isempty(r) ? throw(ArgumentError("range must be non-empty")) : last(r)
minimum(r::Range) = isempty(r) ? throw(ArgumentError("range must be non-empty")) : min(first(r), last(r))
maximum(r::Range) = isempty(r) ? throw(ArgumentError("range must be non-empty")) : max(first(r), last(r))
ctranspose(r::Range) = [x for _=1:1, x=r]
transpose(r::Range) = r'
# Ranges are immutable
copy(r::Range) = r
## iteration
start(r::FloatRange) = 0
done(r::FloatRange, i::Int) = length(r) <= i
next{T}(r::FloatRange{T}, i::Int) =
(convert(T, (r.start + i*r.step)/r.divisor), i+1)
start(r::LinSpace) = 1
done(r::LinSpace, i::Int) = length(r) < i
next{T}(r::LinSpace{T}, i::Int) =
(convert(T, ((r.len-i)*r.start + (i-1)*r.stop)/r.divisor), i+1)
start(r::StepRange) = oftype(r.start + r.step, r.start)
next{T}(r::StepRange{T}, i) = (convert(T,i), i+r.step)
done{T,S}(r::StepRange{T,S}, i) = isempty(r) | (i < min(r.start, r.stop)) | (i > max(r.start, r.stop))
done{T,S}(r::StepRange{T,S}, i::Integer) =
isempty(r) | (i == oftype(i, r.stop) + r.step)
start{T}(r::UnitRange{T}) = oftype(r.start + one(T), r.start)
next{T}(r::AbstractUnitRange{T}, i) = (convert(T, i), i + one(T))
done{T}(r::AbstractUnitRange{T}, i) = i == oftype(i, r.stop) + one(T)
start{T}(r::OneTo{T}) = one(T)
# some special cases to favor default Int type to avoid overflow
let smallint = (Int === Int64 ?
Union{Int8,UInt8,Int16,UInt16,Int32,UInt32} :
Union{Int8,UInt8,Int16,UInt16})
global start
global next
start{T<:smallint}(r::StepRange{T}) = convert(Int, r.start)
next{T<:smallint}(r::StepRange{T}, i) = (i % T, i + r.step)
start{T<:smallint}(r::UnitRange{T}) = convert(Int, r.start)
next{T<:smallint}(r::AbstractUnitRange{T}, i) = (i % T, i + 1)
start{T<:smallint}(r::OneTo{T}) = 1
end
## indexing
function getindex{T}(v::UnitRange{T}, i::Integer)
@_inline_meta
ret = convert(T, first(v) + i - 1)
@boundscheck ((i > 0) & (ret <= v.stop) & (ret >= v.start)) || throw_boundserror(v, i)
ret
end
function getindex{T}(v::OneTo{T}, i::Integer)
@_inline_meta
@boundscheck ((i > 0) & (i <= v.stop)) || throw_boundserror(v, i)
convert(T, i)
end
function getindex{T}(v::Range{T}, i::Integer)
@_inline_meta
ret = convert(T, first(v) + (i - 1)*step(v))
ok = ifelse(step(v) > zero(step(v)),
(ret <= v.stop) & (ret >= v.start),
(ret <= v.start) & (ret >= v.stop))
@boundscheck ((i > 0) & ok) || throw_boundserror(v, i)
ret
end
function getindex{T}(r::FloatRange{T}, i::Integer)
@_inline_meta
@boundscheck checkbounds(r, i)
convert(T, (r.start + (i-1)*r.step)/r.divisor)
end
function getindex{T}(r::LinSpace{T}, i::Integer)
@_inline_meta
@boundscheck checkbounds(r, i)
convert(T, ((r.len-i)*r.start + (i-1)*r.stop)/r.divisor)
end
getindex(r::Range, ::Colon) = copy(r)
function getindex{T<:Integer}(r::AbstractUnitRange, s::AbstractUnitRange{T})
@_inline_meta
@boundscheck checkbounds(r, s)
f = first(r)
st = oftype(f, f + first(s)-1)
range(st, length(s))
end
function getindex{T}(r::OneTo{T}, s::OneTo)
@_inline_meta
@boundscheck checkbounds(r, s)
OneTo(T(s.stop))
end
function getindex{T<:Integer}(r::AbstractUnitRange, s::StepRange{T})
@_inline_meta
@boundscheck checkbounds(r, s)
st = oftype(first(r), first(r) + s.start-1)
range(st, step(s), length(s))
end
function getindex{T<:Integer}(r::StepRange, s::Range{T})
@_inline_meta
@boundscheck checkbounds(r, s)
st = oftype(r.start, r.start + (first(s)-1)*step(r))
range(st, step(r)*step(s), length(s))
end
function getindex(r::FloatRange, s::OrdinalRange)
@_inline_meta
@boundscheck checkbounds(r, s)
FloatRange(r.start + (first(s)-1)*r.step, step(s)*r.step, length(s), r.divisor)
end
function getindex{T}(r::LinSpace{T}, s::OrdinalRange)
@_inline_meta
@boundscheck checkbounds(r, s)
sl::T = length(s)
ifirst = first(s)
ilast = last(s)
vfirst::T = ((r.len - ifirst) * r.start + (ifirst - 1) * r.stop) / r.divisor
vlast::T = ((r.len - ilast) * r.start + (ilast - 1) * r.stop) / r.divisor
return linspace(vfirst, vlast, sl)
end
show(io::IO, r::Range) = print(io, repr(first(r)), ':', repr(step(r)), ':', repr(last(r)))
show(io::IO, r::UnitRange) = print(io, repr(first(r)), ':', repr(last(r)))
show(io::IO, r::OneTo) = print(io, "Base.OneTo(", r.stop, ")")
=={T<:Range}(r::T, s::T) = (first(r) == first(s)) & (step(r) == step(s)) & (last(r) == last(s))
==(r::OrdinalRange, s::OrdinalRange) = (first(r) == first(s)) & (step(r) == step(s)) & (last(r) == last(s))
=={T<:LinSpace}(r::T, s::T) = (first(r) == first(s)) & (length(r) == length(s)) & (last(r) == last(s))
function ==(r::Range, s::Range)
lr = length(r)
if lr != length(s)
return false
end
u, v = start(r), start(s)
while !done(r, u)
x, u = next(r, u)
y, v = next(s, v)
if x != y
return false
end
end
return true
end
intersect(r::OneTo, s::OneTo) = OneTo(min(r.stop,s.stop))
intersect{T1<:Integer, T2<:Integer}(r::AbstractUnitRange{T1}, s::AbstractUnitRange{T2}) = max(first(r),first(s)):min(last(r),last(s))
intersect{T<:Integer}(i::Integer, r::AbstractUnitRange{T}) =
i < first(r) ? (first(r):i) :
i > last(r) ? (i:last(r)) : (i:i)
intersect{T<:Integer}(r::AbstractUnitRange{T}, i::Integer) = intersect(i, r)
function intersect{T1<:Integer, T2<:Integer}(r::AbstractUnitRange{T1}, s::StepRange{T2})
if isempty(s)
range(first(r), 0)
elseif step(s) == 0
intersect(first(s), r)
elseif step(s) < 0
intersect(r, reverse(s))
else
sta = first(s)
ste = step(s)
sto = last(s)
lo = first(r)
hi = last(r)
i0 = max(sta, lo + mod(sta - lo, ste))
i1 = min(sto, hi - mod(hi - sta, ste))
i0:ste:i1
end
end
function intersect{T1<:Integer, T2<:Integer}(r::StepRange{T1}, s::AbstractUnitRange{T2})
if step(r) < 0
reverse(intersect(s, reverse(r)))
else
intersect(s, r)
end
end
function intersect(r::StepRange, s::StepRange)
if isempty(r) || isempty(s)
return range(first(r), step(r), 0)
elseif step(s) < 0
return intersect(r, reverse(s))
elseif step(r) < 0
return reverse(intersect(reverse(r), s))
end
start1 = first(r)
step1 = step(r)
stop1 = last(r)
start2 = first(s)
step2 = step(s)
stop2 = last(s)
a = lcm(step1, step2)
# if a == 0
# # One or both ranges have step 0.
# if step1 == 0 && step2 == 0
# return start1 == start2 ? r : Range(start1, 0, 0)
# elseif step1 == 0
# return start2 <= start1 <= stop2 && rem(start1 - start2, step2) == 0 ? r : Range(start1, 0, 0)
# else
# return start1 <= start2 <= stop1 && rem(start2 - start1, step1) == 0 ? (start2:step1:start2) : Range(start1, step1, 0)
# end
# end
g, x, y = gcdx(step1, step2)
if rem(start1 - start2, g) != 0
# Unaligned, no overlap possible.
return range(start1, a, 0)
end
z = div(start1 - start2, g)
b = start1 - x * z * step1
# Possible points of the intersection of r and s are
# ..., b-2a, b-a, b, b+a, b+2a, ...
# Determine where in the sequence to start and stop.
m = max(start1 + mod(b - start1, a), start2 + mod(b - start2, a))
n = min(stop1 - mod(stop1 - b, a), stop2 - mod(stop2 - b, a))
m:a:n
end
function intersect(r1::Range, r2::Range, r3::Range, r::Range...)
i = intersect(intersect(r1, r2), r3)
for t in r
i = intersect(i, t)
end
i
end
# findin (the index of intersection)
function _findin{T1<:Integer, T2<:Integer}(r::Range{T1}, span::AbstractUnitRange{T2})
local ifirst
local ilast
fspan = first(span)
lspan = last(span)
fr = first(r)
lr = last(r)
sr = step(r)
if sr > 0
ifirst = fr >= fspan ? 1 : ceil(Integer,(fspan-fr)/sr)+1
ilast = lr <= lspan ? length(r) : length(r) - ceil(Integer,(lr-lspan)/sr)
elseif sr < 0
ifirst = fr <= lspan ? 1 : ceil(Integer,(lspan-fr)/sr)+1
ilast = lr >= fspan ? length(r) : length(r) - ceil(Integer,(lr-fspan)/sr)
else
ifirst = fr >= fspan ? 1 : length(r)+1
ilast = fr <= lspan ? length(r) : 0
end
ifirst, ilast
end
function findin{T1<:Integer, T2<:Integer}(r::AbstractUnitRange{T1}, span::AbstractUnitRange{T2})
ifirst, ilast = _findin(r, span)
ifirst:ilast
end
function findin{T1<:Integer, T2<:Integer}(r::Range{T1}, span::AbstractUnitRange{T2})
ifirst, ilast = _findin(r, span)
ifirst:1:ilast
end
## linear operations on ranges ##
-(r::OrdinalRange) = range(-first(r), -step(r), length(r))
-(r::FloatRange) = FloatRange(-r.start, -r.step, r.len, r.divisor)
-(r::LinSpace) = LinSpace(-r.start, -r.stop, r.len, r.divisor)
.+(x::Real, r::AbstractUnitRange) = range(x + first(r), length(r))
.+(x::Real, r::Range) = (x+first(r)):step(r):(x+last(r))
#.+(x::Real, r::StepRange) = range(x + r.start, r.step, length(r))
.+(x::Real, r::FloatRange) = FloatRange(r.divisor*x + r.start, r.step, r.len, r.divisor)
function .+{T}(x::Real, r::LinSpace{T})
x2 = x * r.divisor / (r.len - 1)
LinSpace(x2 + r.start, x2 + r.stop, r.len, r.divisor)
end
.+(r::Range, x::Real) = x + r
#.+(r::FloatRange, x::Real) = x + r
.-(x::Real, r::Range) = (x-first(r)):-step(r):(x-last(r))
.-(x::Real, r::FloatRange) = FloatRange(r.divisor*x - r.start, -r.step, r.len, r.divisor)
function .-(x::Real, r::LinSpace)
x2 = x * r.divisor / (r.len - 1)
LinSpace(x2 - r.start, x2 - r.stop, r.len, r.divisor)
end
.-(r::AbstractUnitRange, x::Real) = range(first(r)-x, length(r))
.-(r::StepRange , x::Real) = range(r.start-x, r.step, length(r))
.-(r::FloatRange, x::Real) = FloatRange(r.start - r.divisor*x, r.step, r.len, r.divisor)
function .-(r::LinSpace, x::Real)
x2 = x * r.divisor / (r.len - 1)
LinSpace(r.start - x2, r.stop - x2, r.len, r.divisor)
end
.*(x::Real, r::OrdinalRange) = range(x*first(r), x*step(r), length(r))
.*(x::Real, r::FloatRange) = FloatRange(x*r.start, x*r.step, r.len, r.divisor)
.*(x::Real, r::LinSpace) = LinSpace(x * r.start, x * r.stop, r.len, r.divisor)
.*(r::Range, x::Real) = x .* r
.*(r::FloatRange, x::Real) = x .* r
.*(r::LinSpace, x::Real) = x .* r
./(r::OrdinalRange, x::Real) = range(first(r)/x, step(r)/x, length(r))
./(r::FloatRange, x::Real) = FloatRange(r.start/x, r.step/x, r.len, r.divisor)
./(r::LinSpace, x::Real) = LinSpace(r.start / x, r.stop / x, r.len, r.divisor)
promote_rule{T1,T2}(::Type{UnitRange{T1}},::Type{UnitRange{T2}}) =
UnitRange{promote_type(T1,T2)}
convert{T<:Real}(::Type{UnitRange{T}}, r::UnitRange{T}) = r
convert{T<:Real}(::Type{UnitRange{T}}, r::UnitRange) = UnitRange{T}(r.start, r.stop)
promote_rule{T1,T2}(::Type{OneTo{T1}},::Type{OneTo{T2}}) =
OneTo{promote_type(T1,T2)}
convert{T<:Real}(::Type{OneTo{T}}, r::OneTo{T}) = r
convert{T<:Real}(::Type{OneTo{T}}, r::OneTo) = OneTo{T}(r.stop)
promote_rule{T1,UR<:AbstractUnitRange}(::Type{UnitRange{T1}}, ::Type{UR}) =
UnitRange{promote_type(T1,eltype(UR))}
convert{T<:Real}(::Type{UnitRange{T}}, r::AbstractUnitRange) = UnitRange{T}(first(r), last(r))
convert(::Type{UnitRange}, r::AbstractUnitRange) = UnitRange(first(r), last(r))
promote_rule{T1a,T1b,T2a,T2b}(::Type{StepRange{T1a,T1b}},::Type{StepRange{T2a,T2b}}) =
StepRange{promote_type(T1a,T2a),promote_type(T1b,T2b)}
convert{T1,T2}(::Type{StepRange{T1,T2}}, r::StepRange{T1,T2}) = r
promote_rule{T1a,T1b,UR<:AbstractUnitRange}(::Type{StepRange{T1a,T1b}},::Type{UR}) =
StepRange{promote_type(T1a,eltype(UR)),promote_type(T1b,eltype(UR))}
convert{T1,T2}(::Type{StepRange{T1,T2}}, r::Range) =
StepRange{T1,T2}(convert(T1, first(r)), convert(T2, step(r)), convert(T1, last(r)))
convert{T}(::Type{StepRange}, r::AbstractUnitRange{T}) =
StepRange{T,T}(first(r), step(r), last(r))
promote_rule{T1,T2}(::Type{FloatRange{T1}},::Type{FloatRange{T2}}) =
FloatRange{promote_type(T1,T2)}
convert{T<:AbstractFloat}(::Type{FloatRange{T}}, r::FloatRange{T}) = r
convert{T<:AbstractFloat}(::Type{FloatRange{T}}, r::FloatRange) =
FloatRange{T}(r.start,r.step,r.len,r.divisor)
promote_rule{F,OR<:OrdinalRange}(::Type{FloatRange{F}}, ::Type{OR}) =
FloatRange{promote_type(F,eltype(OR))}
convert{T<:AbstractFloat}(::Type{FloatRange{T}}, r::OrdinalRange) =
FloatRange{T}(first(r), step(r), length(r), one(T))
convert{T}(::Type{FloatRange}, r::OrdinalRange{T}) =
FloatRange{typeof(float(first(r)))}(first(r), step(r), length(r), one(T))
promote_rule{T1,T2}(::Type{LinSpace{T1}},::Type{LinSpace{T2}}) =
LinSpace{promote_type(T1,T2)}
convert{T<:AbstractFloat}(::Type{LinSpace{T}}, r::LinSpace{T}) = r
convert{T<:AbstractFloat}(::Type{LinSpace{T}}, r::LinSpace) =
LinSpace{T}(r.start, r.stop, r.len, r.divisor)
promote_rule{F,OR<:OrdinalRange}(::Type{LinSpace{F}}, ::Type{OR}) =
LinSpace{promote_type(F,eltype(OR))}
convert{T<:AbstractFloat}(::Type{LinSpace{T}}, r::OrdinalRange) =
linspace(convert(T, first(r)), convert(T, last(r)), convert(T, length(r)))
convert{T}(::Type{LinSpace}, r::OrdinalRange{T}) =
convert(LinSpace{typeof(float(first(r)))}, r)
# Promote FloatRange to LinSpace
promote_rule{F,OR<:FloatRange}(::Type{LinSpace{F}}, ::Type{OR}) =
LinSpace{promote_type(F,eltype(OR))}
convert{T<:AbstractFloat}(::Type{LinSpace{T}}, r::FloatRange) =
linspace(convert(T, first(r)), convert(T, last(r)), convert(T, length(r)))
convert{T<:AbstractFloat}(::Type{LinSpace}, r::FloatRange{T}) =
convert(LinSpace{T}, r)
# +/- of ranges is defined in operators.jl (to be able to use @eval etc.)
## non-linear operations on ranges and fallbacks for non-real numbers ##
.+(x::Number, r::Range) = [ x+y for y=r ]
.+(r::Range, y::Number) = [ x+y for x=r ]
.-(x::Number, r::Range) = [ x-y for y=r ]
.-(r::Range, y::Number) = [ x-y for x=r ]
.*(x::Number, r::Range) = [ x*y for y=r ]
.*(r::Range, y::Number) = [ x*y for x=r ]
./(x::Number, r::Range) = [ x/y for y=r ]
./(r::Range, y::Number) = [ x/y for x=r ]
.^(x::Number, r::Range) = [ x^y for y=r ]
.^(r::Range, y::Number) = [ x^y for x=r ]
## concatenation ##
function vcat{T}(rs::Range{T}...)
n::Int = 0
for ra in rs
n += length(ra)
end
a = Array{T}(n)
i = 1
for ra in rs, x in ra
@inbounds a[i] = x
i += 1
end
return a
end
convert{T}(::Type{Array{T,1}}, r::Range{T}) = vcat(r)
collect(r::Range) = vcat(r)
reverse(r::OrdinalRange) = colon(last(r), -step(r), first(r))
reverse(r::FloatRange) = FloatRange(r.start + (r.len-1)*r.step, -r.step, r.len, r.divisor)
reverse(r::LinSpace) = LinSpace(r.stop, r.start, r.len, r.divisor)
## sorting ##
issorted(r::AbstractUnitRange) = true
issorted(r::Range) = step(r) >= zero(step(r))
sort(r::AbstractUnitRange) = r
sort!(r::AbstractUnitRange) = r
sort(r::Range) = issorted(r) ? r : reverse(r)
sortperm(r::AbstractUnitRange) = 1:length(r)
sortperm(r::Range) = issorted(r) ? (1:1:length(r)) : (length(r):-1:1)
function sum{T<:Real}(r::Range{T})
l = length(r)
# note that a little care is required to avoid overflow in l*(l-1)/2
return l * first(r) + (iseven(l) ? (step(r) * (l-1)) * (l>>1)
: (step(r) * l) * ((l-1)>>1))
end
function sum(r::FloatRange)
l = length(r)
if iseven(l)
s = r.step * (l-1) * (l>>1)
else
s = (r.step * l) * ((l-1)>>1)
end
return (l * r.start + s)/r.divisor
end
function mean{T<:Real}(r::Range{T})
isempty(r) && throw(ArgumentError("mean of an empty range is undefined"))
(first(r) + last(r)) / 2
end
median{T<:Real}(r::Range{T}) = mean(r)
function in(x, r::Range)
n = step(r) == 0 ? 1 : round(Integer,(x-first(r))/step(r))+1
n >= 1 && n <= length(r) && r[n] == x
end
in{T<:Integer}(x::Integer, r::AbstractUnitRange{T}) = (first(r) <= x) & (x <= last(r))
in{T<:Integer}(x, r::Range{T}) = isinteger(x) && !isempty(r) && x>=minimum(r) && x<=maximum(r) && (mod(convert(T,x),step(r))-mod(first(r),step(r)) == 0)
in(x::Char, r::Range{Char}) = !isempty(r) && x >= minimum(r) && x <= maximum(r) && (mod(Int(x) - Int(first(r)), step(r)) == 0)