if ARCH_SA1100
menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
select ARM_SA1110_CPUFREQ
select GPIO_REG
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
config ASSABET_NEPONSET
bool "Include support for Neponset"
depends on SA1100_ASSABET
select SA1111
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (Assabet) with the SA-1111
Development Board (Nepon).
config SA1100_CERF
bool "CerfBoard"
select ARM_SA1110_CPUFREQ
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
<http://www.intrinsyc.com/products/cerfboard/>.
Say Y if configuring for an Intrinsyc CerfBoard.
Say N otherwise.
choice
prompt "Cerf Flash available"
depends on SA1100_CERF
default SA1100_CERF_FLASH_8MB
config SA1100_CERF_FLASH_8MB
bool "8MB"
config SA1100_CERF_FLASH_16MB
bool "16MB"
config SA1100_CERF_FLASH_32MB
bool "32MB"
endchoice
config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
# FIXME: select ARM_SA11x0_CPUFREQ
select SHARP_LOCOMO
select SHARP_PARAM
select SHARP_SCOOP
help
Say Y here to support the Sharp Zaurus SL5500 PDAs.
config SA1100_H3100
bool "Compaq iPAQ H3100"
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer.
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 and H3700 handheld computers.
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select ARM_SA1100_CPUFREQ
select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
config SA1100_JORNADA720
bool "HP Jornada 720"
# FIXME: select ARM_SA11x0_CPUFREQ
select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See
<http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
config SA1100_JORNADA720_SSP
bool "HP Jornada 720 Extended SSP driver"
depends on SA1100_JORNADA720
select SA1100_SSP
help
Say Y here if you have a HP Jornada 7xx handheld computer and you
want to access devices connected to the MCU. Those include the
keyboard, touchscreen, backlight and battery. This driver also activates
the generic SSP which it extends.
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
select ARM_SA1100_CPUFREQ
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config SA1100_LART
bool "LART"
select ARM_SA1100_CPUFREQ
help
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for
information on the LART.
config SA1100_NANOENGINE
bool "nanoEngine"
select ARM_SA1110_CPUFREQ
select PCI
select PCI_NANOENGINE
help
Say Y here if you are using the Bright Star Engineering nanoEngine.
See <http://www.brightstareng.com/arm/nanoeng.htm> for information
on the BSE nanoEngine.
config SA1100_PLEB
bool "PLEB"
select ARM_SA1100_CPUFREQ
help
Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB).
See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
for more information.
config SA1100_SHANNON
bool "Shannon"
select ARM_SA1100_CPUFREQ
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
and a telco interface.
config SA1100_SIMPAD
bool "Simpad"
select ARM_SA1110_CPUFREQ
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
like CL4 in additional it has a PCMCIA-Slot. For more information
visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
config SA1100_SSP
tristate "Generic PIO SSP"
help
Say Y here to enable support for the generic PIO SSP driver.
This isn't for audio support, but for attached sensors and
other devices, eg for BadgePAD 4 sensor support.
endmenu
endif