/* ld script to make the Linux/CRIS kernel
* Authors: Bjorn Wesen (bjornw@axis.com)
*
* It is VERY DANGEROUS to fiddle around with the symbols in this
* script. It is for example quite vital that all generated sections
* that are used are actually named here, otherwise the linker will
* put them at the end, where the init stuff is which is FREED after
* the kernel has booted.
*/
#include <linux/autoconf.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#ifdef CONFIG_ETRAX_VMEM_SIZE
#define __CONFIG_ETRAX_VMEM_SIZE CONFIG_ETRAX_VMEM_SIZE
#else
#define __CONFIG_ETRAX_VMEM_SIZE 0
#endif
jiffies = jiffies_64;
SECTIONS
{
. = DRAM_VIRTUAL_BASE;
dram_start = .;
#ifdef CONFIG_ETRAX_ARCH_V10
ibr_start = .;
#else
ebp_start = .;
/* The boot section is only necessary until the VCS top */
/* level testbench includes both flash and DRAM. */
.boot : { *(.boot) }
#endif
/* see head.S and pages reserved at the start */
. = DRAM_VIRTUAL_BASE + 0x4000;
_text = .; /* Text and read-only data. */
text_start = .; /* Lots of aliases. */
_stext = .;
__stext = .;
.text : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*(.fixup)
*(.text.__*)
}
_etext = . ; /* End of text section. */
__etext = .;
. = ALIGN(4); /* Exception table. */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
RODATA
. = ALIGN (4);
___data_start = . ;
__Sdata = . ;
.data : { /* Data */
DATA_DATA
}
__edata = . ; /* End of data section. */
_edata = . ;
. = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */
.data.init_task : { *(.data.init_task) }
. = ALIGN(PAGE_SIZE); /* Init code and data. */
__init_begin = .;
.init.text : {
_sinittext = .;
INIT_TEXT
_einittext = .;
}
.init.data : { INIT_DATA }
. = ALIGN(16);
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
#ifdef CONFIG_ETRAX_ARCH_V32
__start___param = .;
__param : { *(__param) }
__stop___param = .;
#endif
.initcall.init : {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
SECURITY_INIT
#ifdef CONFIG_ETRAX_ARCH_V10
#ifdef CONFIG_BLK_DEV_INITRD
.init.ramfs : {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
#endif
__vmlinux_end = .; /* Last address of the physical file. */
#ifdef CONFIG_ETRAX_ARCH_V32
PERCPU(PAGE_SIZE)
.init.ramfs : {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
/*
* We fill to the next page, so we can discard all init
* pages without needing to consider what payload might be
* appended to the kernel image.
*/
. = ALIGN(PAGE_SIZE);
__init_end = .;
__data_end = . ; /* Move to _edata ? */
__bss_start = .; /* BSS. */
.bss : {
*(COMMON)
*(.bss)
}
. = ALIGN (0x20);
_end = .;
__end = .;
/* Sections to be discarded */
/DISCARD/ : {
EXIT_TEXT
EXIT_DATA
*(.exitcall.exit)
}
dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024;
}