// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2017 IBM Corporation
*/
#include <linux/clk.h>
#include <linux/log2.h>
#include <linux/mfd/syscon.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
#include <linux/regmap.h>
#include <linux/aspeed-lpc-ctrl.h>
#define DEVICE_NAME "aspeed-lpc-ctrl"
#define HICR5 0x0
#define HICR5_ENL2H BIT(8)
#define HICR5_ENFWH BIT(10)
#define HICR6 0x4
#define SW_FWH2AHB BIT(17)
#define HICR7 0x8
#define HICR8 0xc
struct aspeed_lpc_ctrl {
struct miscdevice miscdev;
struct regmap *regmap;
struct clk *clk;
phys_addr_t mem_base;
resource_size_t mem_size;
u32 pnor_size;
u32 pnor_base;
bool fwh2ahb;
};
static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
{
return container_of(file->private_data, struct aspeed_lpc_ctrl,
miscdev);
}
static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
{
struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
unsigned long vsize = vma->vm_end - vma->vm_start;
pgprot_t prot = vma->vm_page_prot;
if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size)
return -EINVAL;
/* ast2400/2500 AHB accesses are not cache coherent */
prot = pgprot_noncached(prot);
if (remap_pfn_range(vma, vma->vm_start,
(lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
vsize, prot))
return -EAGAIN;
return 0;
}
static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
unsigned long param)
{
struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
struct device *dev = file->private_data;
void __user *p = (void __user *)param;
struct aspeed_lpc_ctrl_mapping map;
u32 addr;
u32 size;
long rc;
if (copy_from_user(&map, p, sizeof(map)))
return -EFAULT;
if (map.flags != 0)
return -EINVAL;
switch (cmd) {
case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
/* The flash windows don't report their size */
if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
return -EINVAL;
/* Support more than one window id in the future */
if (map.window_id != 0)
return -EINVAL;
/* If memory-region is not described in device tree */
if (!lpc_ctrl->mem_size) {
dev_dbg(dev, "Didn't find reserved memory\n");
return -ENXIO;
}
map.size = lpc_ctrl->mem_size;
return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
case ASPEED_LPC_CTRL_IOCTL_MAP:
/*
* The top half of HICR7 is the MSB of the BMC address of the
* mapping.
* The bottom half of HICR7 is the MSB of the HOST LPC
* firmware space address of the mapping.
*
* The 1 bits in the top of half of HICR8 represent the bits
* (in the requested address) that should be ignored and
* replaced with those from the top half of HICR7.
* The 1 bits in the bottom half of HICR8 represent the bits
* (in the requested address) that should be kept and pass
* into the BMC address space.
*/
/*
* It doesn't make sense to talk about a size or offset with
* low 16 bits set. Both HICR7 and HICR8 talk about the top 16
* bits of addresses and sizes.
*/
if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
return -EINVAL;
/*
* Because of the way the masks work in HICR8 offset has to
* be a multiple of size.
*/
if (map.offset & (map.size - 1))
return -EINVAL;
if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
if (!lpc_ctrl->pnor_size) {
dev_dbg(dev, "Didn't find host pnor flash\n");
return -ENXIO;
}
addr = lpc_ctrl->pnor_base;
size = lpc_ctrl->pnor_size;
} else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
/* If memory-region is not described in device tree */
if (!lpc_ctrl->mem_size) {
dev_dbg(dev, "Didn't find reserved memory\n");
return -ENXIO;
}
addr = lpc_ctrl->mem_base;
size = lpc_ctrl->mem_size;
} else {
return -EINVAL;
}
/* Check overflow first! */
if (map.offset + map.size < map.offset ||
map.offset + map.size > size)
return -EINVAL;
if (map.size == 0 || map.size > size)
return -EINVAL;
addr += map.offset;
/*
* addr (host lpc address) is safe regardless of values. This
* simply changes the address the host has to request on its
* side of the LPC bus. This cannot impact the hosts own
* memory space by surprise as LPC specific accessors are
* required. The only strange thing that could be done is
* setting the lower 16 bits but the shift takes care of that.
*/
rc = regmap_write(lpc_ctrl->regmap, HICR7,
(addr | (map.addr >> 16)));
if (rc)
return rc;
rc = regmap_write(lpc_ctrl->regmap, HICR8,
(~(map.size - 1)) | ((map.size >> 16) - 1));
if (rc)
return rc;
/*
* Switch to FWH2AHB mode, AST2600 only.
*
* The other bits in this register are interrupt status bits
* that are cleared by writing 1. As we don't want to clear
* them, set only the bit of interest.
*/
if (lpc_ctrl->fwh2ahb)
regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB);
/*
* Enable LPC FHW cycles. This is required for the host to
* access the regions specified.
*/
return regmap_update_bits(lpc_ctrl->regmap, HICR5,
HICR5_ENFWH | HICR5_ENL2H,
HICR5_ENFWH | HICR5_ENL2H);
}
return -EINVAL;
}
static const struct file_operations aspeed_lpc_ctrl_fops = {
.owner = THIS_MODULE,
.mmap = aspeed_lpc_ctrl_mmap,
.unlocked_ioctl = aspeed_lpc_ctrl_ioctl,
};
static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
{
struct aspeed_lpc_ctrl *lpc_ctrl;
struct device_node *node;
struct resource resm;
struct device *dev;
int rc;
dev = &pdev->dev;
lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
if (!lpc_ctrl)
return -ENOMEM;
/* If flash is described in device tree then store */
node = of_parse_phandle(dev->of_node, "flash", 0);
if (!node) {
dev_dbg(dev, "Didn't find host pnor flash node\n");
} else {
rc = of_address_to_resource(node, 1, &resm);
of_node_put(node);
if (rc) {
dev_err(dev, "Couldn't address to resource for flash\n");
return rc;
}
lpc_ctrl->pnor_size = resource_size(&resm);
lpc_ctrl->pnor_base = resm.start;
}
dev_set_drvdata(&pdev->dev, lpc_ctrl);
/* If memory-region is described in device tree then store */
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (!node) {
dev_dbg(dev, "Didn't find reserved memory\n");
} else {
rc = of_address_to_resource(node, 0, &resm);
of_node_put(node);
if (rc) {
dev_err(dev, "Couldn't address to resource for reserved memory\n");
return -ENXIO;
}
lpc_ctrl->mem_size = resource_size(&resm);
lpc_ctrl->mem_base = resm.start;
if (!is_power_of_2(lpc_ctrl->mem_size)) {
dev_err(dev, "Reserved memory size must be a power of 2, got %u\n",
(unsigned int)lpc_ctrl->mem_size);
return -EINVAL;
}
if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) {
dev_err(dev, "Reserved memory must be naturally aligned for size %u\n",
(unsigned int)lpc_ctrl->mem_size);
return -EINVAL;
}
}
lpc_ctrl->regmap = syscon_node_to_regmap(
pdev->dev.parent->of_node);
if (IS_ERR(lpc_ctrl->regmap)) {
dev_err(dev, "Couldn't get regmap\n");
return -ENODEV;
}
lpc_ctrl->clk = devm_clk_get(dev, NULL);
if (IS_ERR(lpc_ctrl->clk)) {
dev_err(dev, "couldn't get clock\n");
return PTR_ERR(lpc_ctrl->clk);
}
rc = clk_prepare_enable(lpc_ctrl->clk);
if (rc) {
dev_err(dev, "couldn't enable clock\n");
return rc;
}
if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl"))
lpc_ctrl->fwh2ahb = true;
lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
lpc_ctrl->miscdev.name = DEVICE_NAME;
lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
lpc_ctrl->miscdev.parent = dev;
rc = misc_register(&lpc_ctrl->miscdev);
if (rc) {
dev_err(dev, "Unable to register device\n");
goto err;
}
return 0;
err:
clk_disable_unprepare(lpc_ctrl->clk);
return rc;
}
static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
{
struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
misc_deregister(&lpc_ctrl->miscdev);
clk_disable_unprepare(lpc_ctrl->clk);
return 0;
}
static const struct of_device_id aspeed_lpc_ctrl_match[] = {
{ .compatible = "aspeed,ast2400-lpc-ctrl" },
{ .compatible = "aspeed,ast2500-lpc-ctrl" },
{ .compatible = "aspeed,ast2600-lpc-ctrl" },
{ },
};
static struct platform_driver aspeed_lpc_ctrl_driver = {
.driver = {
.name = DEVICE_NAME,
.of_match_table = aspeed_lpc_ctrl_match,
},
.probe = aspeed_lpc_ctrl_probe,
.remove = aspeed_lpc_ctrl_remove,
};
module_platform_driver(aspeed_lpc_ctrl_driver);
MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");