# Tests whether the 'wall time' termination criteria work OK on a
# minimal problem
set Dimension = 2
set CFL number = 1.0
set End time = 1e9
set Start time = 0
set Adiabatic surface temperature = 0
set Surface pressure = 0
set Use years in output instead of seconds = false # default: true
set Nonlinear solver scheme = single Advection, single Stokes
subsection Boundary temperature model
set List of model names = box
end
subsection Gravity model
set Model name = vertical
end
subsection Geometry model
set Model name = box
subsection Box
set X extent = 3.3 # default: 1
set Y extent = 2.2
set Z extent = 1.1
set Box origin X coordinate = -1.9
set Box origin Y coordinate = 2.5
set Box origin Z coordinate = 3.1
end
end
subsection Initial temperature model
set Model name = perturbed box
end
subsection Material model
set Model name = simple
subsection Simple model
set Reference density = 1 # default: 3300
set Reference specific heat = 1250
set Reference temperature = 1 # default: 293
set Thermal conductivity = 1e-6 # default: 4.7
set Thermal expansion coefficient = 2e-5
set Viscosity = 1 # default: 5e24
end
end
subsection Mesh refinement
set Initial adaptive refinement = 0
set Initial global refinement = 1
end
# The parameters below this comment were created by the update script
# as replacement for the old 'Model settings' subsection. They can be
# safely merged with any existing subsections with the same name.
subsection Boundary temperature model
set Fixed temperature boundary indicators = 0, 1
end
subsection Boundary velocity model
set Tangential velocity boundary indicators = 1
end
subsection Boundary velocity model
set Zero velocity boundary indicators = 0, 2, 3
end
subsection Termination criteria
set Termination criteria = wall time
set Wall time = 0
end