/**
* Camera internals for 1100D 1.0.5
*/
/** Properties are persistent (saved in NVRAM) => a mistake can cause permanent damage. Undefine this for new ports. */
/** The 1100D port is pretty stable, so I think we can enable properties safely. **/
#define CONFIG_PROP_REQUEST_CHANGE
/**
* State object hooks are pieces of code that run in Canon tasks (state objects). See state-object.c .
* They might slow down Canon code, so here you can disable all of them (useful for debugging or early ports)
*/
#define CONFIG_STATE_OBJECT_HOOKS
/** This camera runs DryOS **/
//~ #define CONFIG_VXWORKS
/** This camera has an APS-C sensor */
//~ #define CONFIG_FULLFRAME
/** This camera has LiveView and can record video **/
#define CONFIG_LIVEVIEW
#define CONFIG_MOVIE
/** This camera has a 4:3 screen, 720x480 **/
#define CONFIG_4_3_SCREEN
/** We only have a single red LED **/
//~ #define CONFIG_BLUE_LED
/** There is no LCD sensor that turns the display off **/
//~ #define CONFIG_LCD_SENSOR
/** This camera does not have a mirror lockup feature **/
//~ #define CONFIG_MLU
/** This camera reports focus info in LiveView **/
#define CONFIG_LV_FOCUS_INFO
/** No level sensor **/
//~ #define CONFIG_ELECTRONIC_LEVEL
/** Define this if the camera has an ambient light sensor used for auto brightness **/
//~ #define CONFIG_AUTO_BRIGHTNESS
/** There is a Q menu in Play mode, with image protect, rate etc **/
#define CONFIG_Q_MENU_PLAYBACK
/** No flip-out display **/
//~ #define CONFIG_VARIANGLE_DISPLAY
/** Battery does not report exact percentage **/
//~ #define CONFIG_BATTERY_INFO
/** We can do bulb exposures **/
#define CONFIG_BULB
/** Bulb mode is done by going to M mode and setting shutter speed beyond 30s **/
//~ #define CONFIG_SEPARATE_BULB_MODE
/** We can't control audio settings from ML **/
//~ #define CONFIG_AUDIO_CONTROLS
/** Zoom button can be used while recording (for Magic Zoom) **/
//~ #define CONFIG_ZOOM_BTN_NOT_WORKING_WHILE_RECORDING
/** We can redirect the display buffer to some arbitrary address, just by changing YUV422_LV_BUFFER_DISPLAY_ADDR **/
#define CONFIG_CAN_REDIRECT_DISPLAY_BUFFER_EASILY
#define CONFIG_CAN_REDIRECT_DISPLAY_BUFFER
/** Therefore, we can implement display filters (features that alter the LiveView image in real-time) **/
#define CONFIG_DISPLAY_FILTERS
/** We can override ISO on a per-frame basis, by changing FRAME_ISO (e.g. for HDR video or gradual exposure) **/
#define CONFIG_FRAME_ISO_OVERRIDE
/** But we can't override the digital ISO component via FRAME_ISO **/
#define CONFIG_FRAME_ISO_OVERRIDE_ANALOG_ONLY
/** We can't change ExpSim from ML :( **/
//~ #define CONFIG_EXPSIM
/** We can playback sounds via ASIF DMA **/
#define CONFIG_BEEP
/** This camera has trouble saving Kelvin and/or WBShift in movie mode, so ML has to do this instead **/
#define CONFIG_WB_WORKAROUND
/** We can restore ML files after formatting the card in the camera **/
#define CONFIG_RESTORE_AFTER_FORMAT
/** We can use DMA_MEMCPY but it has no real benefit **/
//~ #define CONFIG_DMA_MEMCPY
/** We don't know how to use edmac_memcpy. This one is really fast (600MB/s!) */
//#define CONFIG_EDMAC_MEMCPY
/** We should't warn the user if movie exposure is Auto **/
//~ #define CONFIG_MOVIE_AE_WARNING
/** We can display some extra info in photo mode (not LiveView) **/
#define CONFIG_PHOTO_MODE_INFO_DISPLAY
/** FIO_RenameFile works **/
#define CONFIG_FIO_RENAMEFILE_WORKS
/** Perfect sync using EVF_STATE **/
#define CONFIG_EVF_STATE_SYNC
/** This camera loads ML into the AllocateMemory pool **/
#define CONFIG_ALLOCATE_MEMORY_POOL
/** FPS override: we can change both timer A and B */
//~ #define CONFIG_FPS_TIMER_A_ONLY
/** FPS override: Canon changes FPS registers often; we need to undo their changes asap */
#define CONFIG_FPS_AGGRESSIVE_UPDATE
/** This camera has a mono microphone input, so we should display only one audio meter **/
#define CONFIG_MONO_MIC
/** This camera has a low-resolution display, may require some antialiasing tricks for icons/fonts */
#define CONFIG_LOW_RESOLUTION_DISPLAY
/** This camera uses the exposure comp button to open ML menu */
#define CONFIG_MENU_WITH_AV
/** We don't have access to Raw data (yet) */
//~ #define CONFIG_RAW_LIVEVIEW
#define CONFIG_RAW_PHOTO
/** There are no manual exposure controls in movie mode => we need expo override */
#define CONFIG_NO_MANUAL_EXPOSURE_MOVIE