#! /bin/sh
# Copyright (C) 2008 Alexandre Oliva <lxoliva@fsfla.org>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
# USA
# deblob.sh - prepare a linux-libre tarball out of a non-libre Linux
# tarball. It expects the Linux release (kver) as the first argument,
# and the libre sub-release (extra) as the second optional argument.
# linux-$kver.tar.bz2 and deblob-$kver must exist in the current
# directory, and the line that sets kver and extra in deblob-$kver
# must match the command-line arguments.
# The resulting tarball is put in linux-$kver-libre$extra.tar.bz2, and
# an uncompressed xdelta that produces linux-$kver-libre$extra.tar out
# of linux-$kver.tar is created as linux-$kver-libre$extra.xdelta.
# This xdelta can be distributed to enable third parties to easily
# reconstruct the binary tarball starting out of sources downloaded
# from kernel.org, but without distributing non-Free Software
# yourself, because xdelta (unlike patches) is not reversible: the
# removed bits are not present in it at all.
# To enable you to check the differences between the tarballs, a patch
# file is generated in linux-$kver-libre$extra.patch. This patch file
# contains the non-Free blobs, even though in reversed form, so its
# distribution is discouraged.
# At the end, the script attempts to generate a digital signature for
# the newly-created tarball. This is the last thing the script does,
# so interrupting it at that point to skip the signing won't fail to
# do anything else.
# It is safe to interrupt the script at any other point. When it gets
# a ^C (other than during signing), it starts cleaning up all of its
# temporary and output files. If you insist, it may leave junk
# behind, and then it will refuse to run again before you clean it up
# by hand. It takes extra care to avoid overwriting useful files.
kver=$1 extra=$2 libre=libre$extra
deblob= dir=`echo $0 | sed 's,/[^/]*$,,'`
if test ! -f linux-$kver.tar.bz2; then
echo linux-$kver.tar.bz2 does not exist >&2
exit 1
fi
if test -f deblob-$kver; then
deblob=deblob-$kver
elif test -f deblob; then
deblob=deblob
elif test -f $dir/deblob-$kver; then
cp $dir/deblob-$kver deblob
deblob=deblob
else
echo deblob does not exist >&2
exit 1
fi
x1="kver=$kver extra=$extra"
x2=`grep \"^$x1$\" $deblob`
if test "$x1" != "$x2"; then
:
else
echo deblob script does not match command-line arguments >&2
echo expected: $x1 >&2
echo found : $x2 >&2
exit 1
fi
if test -f linux-$kver-$libre.tar.bz2; then
echo linux-$kver-$libre.tar.bz2 already exists >&2
exit 1
fi
if test -f linux-$kver.tar; then
echo linux-$kver.tar already exists >&2
exit 1
fi
if test -f linux-$kver-$libre.tar; then
echo linux-$kver-$libre.tar already exists >&2
exit 1
fi
if test -f linux-$kver-$libre.patch; then
echo linux-$kver-$libre.patch already exists >&2
exit 1
fi
if test -f linux-$kver-$libre.xdelta; then
echo linux-$kver-$libre.xdelta already exists >&2
exit 1
fi
if test -d linux-$kver; then
echo linux-$kver already exists >&2
exit 1
fi
if test -d linux-$kver-$libre; then
echo linux-$kver-$libre already exists >&2
exit 1
fi
if test -d orig-linux-$kver; then
echo orig-linux-$kver already exists >&2
exit 1
fi
if test -f $dir/deblob-$kver; then
if cmp $dir/deblob-$kver $deblob; then
:
else
echo $dir/deblob-$kver and $deblob are different >&2
exit 1
fi
fi
if test ! -f deblob-check; then
if test -f $dir/deblob-check; then
cp $dir/deblob-check deblob-check
fi
else
if test -f $dir/deblob-check; then
if cmp $dir/deblob-check deblob-check; then
:
else
echo $dir/deblob-check and deblob-check are different >&2
exit 1
fi
fi
fi
trap "status=$?; echo cleaning up...; rm -rf orig-linux-$kver linux-$kver linux-$kver-$libre linux-$kver.tar linux-$kver-$libre.tar linux-$kver-$libre.tar.bz2 linux-$kver-$libre.patch linux-$kver-$libre.xdelta; (exit $status); exit" 0 1 2 15
set -e
echo Uncompressing linux-$kver.tar.bz2 into linux-$kver.tar
rm -rf linux-$kver linux-$kver.tar
bunzip2 < linux-$kver.tar.bz2 > linux-$kver.tar
echo Extracing linux-$kver.tar into linux-$kver
tar -xf linux-$kver.tar
rm -rf linux-$kver-$libre linux-$kver-$libre.tar
echo Copying linux-$kver to linux-$kver-$libre
cp linux-$kver.tar linux-$kver-$libre.tar
cp -lR linux-$kver/. linux-$kver-$libre
echo Deblobbing within linux-$kver-$libre
(cd linux-$kver-$libre && /bin/sh ../$deblob) || exit 1
rm -f linux-$kver-$libre.patch
# Do not copy these scripts for now, deblob-check regards itself as a blog.
# cp -p $0 $deblob deblob-check linux-$kver-$libre
echo Generating linux-$kver-$libre.patch
diff -druN linux-$kver linux-$kver-$libre > linux-$kver-$libre.patch || :
echo Removing removed or modified files from linux-$kver-$libre.tar
diff -rq linux-$kver linux-$kver-$libre |
sed -n "
s,^Only in \\(linux-$kver\\(/.*\\)\\?\\): \\(.*\\),\1/\3,p;
s,^Files \\(linux-$kver\\)/\\(.*\\) and \\1-$libre/\\2 differ,\\1/\\2,p;
" |
xargs tar --delete -f linux-$kver-$libre.tar
echo Adding modified or added files to linux-$kver-$libre.tar
rm -rf orig-linux-$kver
mv linux-$kver orig-linux-$kver
mv linux-$kver-$libre linux-$kver
diff -rq orig-linux-$kver linux-$kver |
sed -n "
s,^Files orig-\\(linux-$kver/.*\\) and \\1 differ,\\1,p;
s,^Only in \\(linux-$kver\\(/.*\\)\\?\\): \\(.*\\),\\1/\\3,p;
" |
xargs tar --append -f linux-$kver-$libre.tar
echo Wiping out extracted trees
rm -rf linux-$kver orig-linux-$kver
echo Creating xdelta between linux-$kver.tar and linux-$kver-$libre.tar
xdelta delta -0 linux-$kver.tar linux-$kver-$libre.tar linux-$kver-$libre.xdelta || :
echo Compressing linux-$kver-$libre.tar and linux-$kver-$libre.xdelta
rm -f linux-$kver.tar
bzip2 -9 linux-$kver-$libre.tar linux-$kver-$libre.xdelta
trap "status=$?; (exit $status); exit" 0 1 2 15
echo Done except for signing, feel free to interrupt
gpg -a --detach-sign linux-$kver-$libre.tar.bz2
mv linux-$kver-$libre.tar.bz2.asc linux-$kver-$libre.tar.bz2.sign
gpg -a --detach-sign linux-$kver-$libre.xdelta.bz2
mv linux-$kver-$libre.xdelta.bz2.asc linux-$kver-$libre.xdelta.bz2.sign
echo All set, please review linux-$kver-$libre.patch
exit 0