#ifndef TARGET_PARAMS_H
#define TARGET_PARAMS_H
struct bcm_target_params {
u32 m_u32CfgVersion;
u32 m_u32CenterFrequency;
u32 m_u32BandAScan;
u32 m_u32BandBScan;
u32 m_u32BandCScan;
u32 m_u32ErtpsOptions;
u32 m_u32PHSEnable;
u32 m_u32HoEnable;
u32 m_u32HoReserved1;
u32 m_u32HoReserved2;
u32 m_u32MimoEnable;
u32 m_u32SecurityEnable;
u32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
/* PowerSaving Mode Options:
* bit 0 = 1: CPE mode - to keep pcmcia if alive;
* bit 1 = 1: CINR reporting in Idlemode Msg
* bit 2 = 1: Default PSC Enable in sleepmode
*/
u32 m_u32PowerSavingModeOptions;
u32 m_u32ArqEnable;
/* From Version #3, the HARQ section renamed as general */
u32 m_u32HarqEnable;
u32 m_u32EEPROMFlag;
/* BINARY TYPE - 4th MSByte: Interface Type - 3rd MSByte: Vendor Type - 2nd MSByte
* Unused - LSByte
*/
u32 m_u32Customize;
u32 m_u32ConfigBW; /* In Hz */
u32 m_u32ShutDownInitThresholdTimer;
u32 m_u32RadioParameter;
u32 m_u32PhyParameter1;
u32 m_u32PhyParameter2;
u32 m_u32PhyParameter3;
u32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
u32 m_u32MaxMACDataperDLFrame;
u32 m_u32MaxMACDataperULFrame;
u32 m_u32Corr2MacFlags;
u32 HostDrvrConfig1;
u32 HostDrvrConfig2;
u32 HostDrvrConfig3;
u32 HostDrvrConfig4;
u32 HostDrvrConfig5;
u32 HostDrvrConfig6;
u32 m_u32SegmentedPUSCenable;
/* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
* BAMC Related Parameters
* Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 Enable Band AMC signaling.
* bit 16-31 Band AMC Data configuration: Bit 16 = 1 Band AMC 2x3 support.
*/
u32 m_u32BandAMCEnable;
};
#endif