/*
* Machine specific setup for generic
*/
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/arch_hooks.h>
#include <asm/e820.h>
#include <asm/setup.h>
#include <mach_ipi.h>
#ifdef CONFIG_HOTPLUG_CPU
#define DEFAULT_SEND_IPI (1)
#else
#define DEFAULT_SEND_IPI (0)
#endif
int no_broadcast = DEFAULT_SEND_IPI;
/**
* pre_intr_init_hook - initialisation prior to setting up interrupt vectors
*
* Description:
* Perform any necessary interrupt initialisation prior to setting up
* the "ordinary" interrupt call gates. For legacy reasons, the ISA
* interrupts should be initialised here if the machine emulates a PC
* in any way.
**/
void __init pre_intr_init_hook(void)
{
if (x86_quirks->arch_pre_intr_init) {
if (x86_quirks->arch_pre_intr_init())
return;
}
init_ISA_irqs();
}
/**
* intr_init_hook - post gate setup interrupt initialisation
*
* Description:
* Fill in any interrupts that may have been left out by the general
* init_IRQ() routine. interrupts having to do with the machine rather
* than the devices on the I/O bus (like APIC interrupts in intel MP
* systems) are started here.
**/
void __init intr_init_hook(void)
{
if (x86_quirks->arch_intr_init) {
if (x86_quirks->arch_intr_init())
return;
}
}
/**
* pre_setup_arch_hook - hook called prior to any setup_arch() execution
*
* Description:
* generally used to activate any machine specific identification
* routines that may be needed before setup_arch() runs. On Voyager
* this is used to get the board revision and type.
**/
void __init pre_setup_arch_hook(void)
{
}
/**
* trap_init_hook - initialise system specific traps
*
* Description:
* Called as the final act of trap_init(). Used in VISWS to initialise
* the various board specific APIC traps.
**/
void __init trap_init_hook(void)
{
if (x86_quirks->arch_trap_init) {
if (x86_quirks->arch_trap_init())
return;
}
}
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
.mask = CPU_MASK_NONE,
.name = "timer"
};
/**
* pre_time_init_hook - do any specific initialisations before.
*
**/
void __init pre_time_init_hook(void)
{
if (x86_quirks->arch_pre_time_init)
x86_quirks->arch_pre_time_init();
}
/**
* time_init_hook - do any specific initialisations for the system timer.
*
* Description:
* Must plug the system timer interrupt source at HZ into the IRQ listed
* in irq_vectors.h:TIMER_IRQ
**/
void __init time_init_hook(void)
{
if (x86_quirks->arch_time_init) {
/*
* A nonzero return code does not mean failure, it means
* that the architecture quirk does not want any
* generic (timer) setup to be performed after this:
*/
if (x86_quirks->arch_time_init())
return;
}
irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
#ifdef CONFIG_MCA
/**
* mca_nmi_hook - hook into MCA specific NMI chain
*
* Description:
* The MCA (Microchannel Architecture) has an NMI chain for NMI sources
* along the MCA bus. Use this to hook into that chain if you will need
* it.
**/
void mca_nmi_hook(void)
{
/*
* If I recall correctly, there's a whole bunch of other things that
* we can do to check for NMI problems, but that's all I know about
* at the moment.
*/
pr_warning("NMI generated from unknown source!\n");
}
#endif
static __init int no_ipi_broadcast(char *str)
{
get_option(&str, &no_broadcast);
pr_info("Using %s mode\n",
no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
return 1;
}
__setup("no_ipi_broadcast=", no_ipi_broadcast);
static int __init print_ipi_mode(void)
{
pr_info("Using IPI %s mode\n",
no_broadcast ? "No-Shortcut" : "Shortcut");
return 0;
}
late_initcall(print_ipi_mode);