// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <linux/platform_device.h>
#include <linux/mfd/syscon.h>
#include "meson-aoclk.h"
#include "gxbb-aoclk.h"
#include "clk-regmap.h"
#include "clk-dualdiv.h"
/* AO Configuration Clock registers offsets */
#define AO_RTI_PWR_CNTL_REG1 0x0c
#define AO_RTI_PWR_CNTL_REG0 0x10
#define AO_RTI_GEN_CNTL_REG0 0x40
#define AO_OSCIN_CNTL 0x58
#define AO_CRT_CLK_CNTL1 0x68
#define AO_RTC_ALT_CLK_CNTL0 0x94
#define AO_RTC_ALT_CLK_CNTL1 0x98
#define GXBB_AO_GATE(_name, _bit) \
static struct clk_regmap _name##_ao = { \
.data = &(struct clk_regmap_gate_data) { \
.offset = AO_RTI_GEN_CNTL_REG0, \
.bit_idx = (_bit), \
}, \
.hw.init = &(struct clk_init_data) { \
.name = #_name "_ao", \
.ops = &clk_regmap_gate_ops, \
.parent_data = &(const struct clk_parent_data) { \
.fw_name = "mpeg-clk", \
}, \
.num_parents = 1, \
.flags = CLK_IGNORE_UNUSED, \
}, \
}
GXBB_AO_GATE(remote, 0);
GXBB_AO_GATE(i2c_master, 1);
GXBB_AO_GATE(i2c_slave, 2);
GXBB_AO_GATE(uart1, 3);
GXBB_AO_GATE(uart2, 5);
GXBB_AO_GATE(ir_blaster, 6);
static struct clk_regmap ao_cts_oscin = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTI_PWR_CNTL_REG0,
.bit_idx = 6,
},
.hw.init = &(struct clk_init_data){
.name = "ao_cts_oscin",
.ops = &clk_regmap_gate_ro_ops,
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
.num_parents = 1,
},
};
static struct clk_regmap ao_32k_pre = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTC_ALT_CLK_CNTL0,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "ao_32k_pre",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &ao_cts_oscin.hw },
.num_parents = 1,
},
};
static const struct meson_clk_dualdiv_param gxbb_32k_div_table[] = {
{
.dual = 1,
.n1 = 733,
.m1 = 8,
.n2 = 732,
.m2 = 11,
}, {}
};
static struct clk_regmap ao_32k_div = {
.data = &(struct meson_clk_dualdiv_data){
.n1 = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 0,
.width = 12,
},
.n2 = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 12,
.width = 12,
},
.m1 = {
.reg_off = AO_RTC_ALT_CLK_CNTL1,
.shift = 0,
.width = 12,
},
.m2 = {
.reg_off = AO_RTC_ALT_CLK_CNTL1,
.shift = 12,
.width = 12,
},
.dual = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 28,
.width = 1,
},
.table = gxbb_32k_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "ao_32k_div",
.ops = &meson_clk_dualdiv_ops,
.parent_hws = (const struct clk_hw *[]) { &ao_32k_pre.hw },
.num_parents = 1,
},
};
static struct clk_regmap ao_32k_sel = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTC_ALT_CLK_CNTL1,
.mask = 0x1,
.shift = 24,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "ao_32k_sel",
.ops = &clk_regmap_mux_ops,
.parent_hws = (const struct clk_hw *[]) {
&ao_32k_div.hw,
&ao_32k_pre.hw
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap ao_32k = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTC_ALT_CLK_CNTL0,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "ao_32k",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &ao_32k_sel.hw },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap ao_cts_rtc_oscin = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTI_PWR_CNTL_REG0,
.mask = 0x7,
.shift = 10,
.table = (u32[]){ 1, 2, 3, 4 },
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "ao_cts_rtc_oscin",
.ops = &clk_regmap_mux_ops,
.parent_data = (const struct clk_parent_data []) {
{ .fw_name = "ext-32k-0", },
{ .fw_name = "ext-32k-1", },
{ .fw_name = "ext-32k-2", },
{ .hw = &ao_32k.hw },
},
.num_parents = 4,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap ao_clk81 = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTI_PWR_CNTL_REG0,
.mask = 0x1,
.shift = 0,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "ao_clk81",
.ops = &clk_regmap_mux_ro_ops,
.parent_data = (const struct clk_parent_data []) {
{ .fw_name = "mpeg-clk", },
{ .hw = &ao_cts_rtc_oscin.hw },
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap ao_cts_cec = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_CRT_CLK_CNTL1,
.mask = 0x1,
.shift = 27,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "ao_cts_cec",
.ops = &clk_regmap_mux_ops,
/*
* FIXME: The 'fixme' parent obviously does not exist.
*
* ATM, CCF won't call get_parent() if num_parents is 1. It
* does not allow NULL as a parent name either.
*
* On this particular mux, we only know the input #1 parent
* but, on boot, unknown input #0 is set, so it is critical
* to call .get_parent() on it
*
* Until CCF gets fixed, adding this fake parent that won't
* ever be registered should work around the problem
*/
.parent_data = (const struct clk_parent_data []) {
{ .name = "fixme", .index = -1, },
{ .hw = &ao_cts_rtc_oscin.hw },
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static const unsigned int gxbb_aoclk_reset[] = {
[RESET_AO_REMOTE] = 16,
[RESET_AO_I2C_MASTER] = 18,
[RESET_AO_I2C_SLAVE] = 19,
[RESET_AO_UART1] = 17,
[RESET_AO_UART2] = 22,
[RESET_AO_IR_BLASTER] = 23,
};
static struct clk_regmap *gxbb_aoclk[] = {
&remote_ao,
&i2c_master_ao,
&i2c_slave_ao,
&uart1_ao,
&uart2_ao,
&ir_blaster_ao,
&ao_cts_oscin,
&ao_32k_pre,
&ao_32k_div,
&ao_32k_sel,
&ao_32k,
&ao_cts_rtc_oscin,
&ao_clk81,
&ao_cts_cec,
};
static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
.hws = {
[CLKID_AO_REMOTE] = &remote_ao.hw,
[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw,
[CLKID_AO_UART1] = &uart1_ao.hw,
[CLKID_AO_UART2] = &uart2_ao.hw,
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
[CLKID_AO_CEC_32K] = &ao_cts_cec.hw,
[CLKID_AO_CTS_OSCIN] = &ao_cts_oscin.hw,
[CLKID_AO_32K_PRE] = &ao_32k_pre.hw,
[CLKID_AO_32K_DIV] = &ao_32k_div.hw,
[CLKID_AO_32K_SEL] = &ao_32k_sel.hw,
[CLKID_AO_32K] = &ao_32k.hw,
[CLKID_AO_CTS_RTC_OSCIN] = &ao_cts_rtc_oscin.hw,
[CLKID_AO_CLK81] = &ao_clk81.hw,
},
.num = NR_CLKS,
};
static const struct meson_aoclk_data gxbb_aoclkc_data = {
.reset_reg = AO_RTI_GEN_CNTL_REG0,
.num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
.reset = gxbb_aoclk_reset,
.num_clks = ARRAY_SIZE(gxbb_aoclk),
.clks = gxbb_aoclk,
.hw_data = &gxbb_aoclk_onecell_data,
};
static const struct of_device_id gxbb_aoclkc_match_table[] = {
{
.compatible = "amlogic,meson-gx-aoclkc",
.data = &gxbb_aoclkc_data,
},
{ }
};
static struct platform_driver gxbb_aoclkc_driver = {
.probe = meson_aoclkc_probe,
.driver = {
.name = "gxbb-aoclkc",
.of_match_table = gxbb_aoclkc_match_table,
},
};
builtin_platform_driver(gxbb_aoclkc_driver);