Revision 336d139f8718b1336c9d22f0e462611ae1229850 authored by Masahiro Yamada on 27 August 2018, 07:01:41 UTC, committed by Boris Brezillon on 27 August 2018, 18:41:46 UTC
Commit 49aa76b16676 ("mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero") gave a new meaning for calling nand_scan_ident() with maxchips=0. It is a special usage for some drivers such as docg4, but actually the Denali driver may pass maxchips=0 to nand_scan() when the driver is enabled but no NAND chip is found on the board for some reasons. If nand_scan_with_ids() is called with maxchips=0, nand_scan_ident() is skipped, then nand_set_defaults() is skipped as well. Thus, the driver must set chip->controller beforehand. Otherwise, nand_attach() causes NULL pointer dereference. In fact, the Denali controller knows the number of connected chips before calling nand_scan_ident(); if DEVICE_RESET fails, there is no chip in that chip select. Then, denali_reset_banks() sets the maxchips to the number of detected chips. If no chip is found, maxchips is zero. In this case, there is no point for calling nand_scan() because we know it will fail for sure. Let's make the probe function fail immediately. Fixes: 49aa76b16676 ("mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
1 parent 166cd44
File | Mode | Size |
---|---|---|
Documentation | ||
LICENSES | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | -rw-r--r-- | 12.8 KB |
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.5 KB |
.mailmap | -rw-r--r-- | 9.7 KB |
COPYING | -rw-r--r-- | 423 bytes |
CREDITS | -rw-r--r-- | 96.4 KB |
Kbuild | -rw-r--r-- | 2.2 KB |
Kconfig | -rw-r--r-- | 563 bytes |
MAINTAINERS | -rw-r--r-- | 458.4 KB |
Makefile | -rw-r--r-- | 59.0 KB |
README | -rw-r--r-- | 800 bytes |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...