Revision 8ef214288622bf523a3b3096958292a1c63132ad authored by Matt Carlson on 02 May 2008, 23:47:53 UTC, committed by David S. Miller on 02 May 2008, 23:47:53 UTC
The MI clock is not configured correctly on adapters with the CPMU present. The tg3 driver has code which statically sets the MI clock to be a fraction of the speed at which the core clock is running. However, the CPMU can change the adapter's core clock frequency based on operating conditions. Consequently, the MI will run slow when the core's clock has been slowed down. There is a new 500KHz constant frequency clock available on adapters with a CPMU. This patch removes the static core clock scaling and configures the MI clock to use this new 500KHz clock instead. Running the MI clock at slower speeds will not directly result in data corruption, but it does challenge the PHY read and write routine timeouts. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 026672d
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
crypto | ||
drivers | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
usr | ||
virt | ||
.gitignore | -rw-r--r-- | 682 bytes |
.mailmap | -rw-r--r-- | 3.6 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 90.5 KB |
Kbuild | -rw-r--r-- | 2.4 KB |
MAINTAINERS | -rw-r--r-- | 96.8 KB |
Makefile | -rw-r--r-- | 53.7 KB |
README | -rw-r--r-- | 16.5 KB |
REPORTING-BUGS | -rw-r--r-- | 3.1 KB |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...