* for-opinicus/asoc:
  ASoC: sun4i-is: also check for NULL on reset pin request

* for-opinicus/gpio:
  gpio: pca953x: add support for the NXP pca9570

* for-opinicus/input:
  input: edt-ft5x06: force touchscreen to remain active
  input: edt-ft5x06: add polldev as an option
  input: edt-ft5x06: take into account the number of fingers
  input: edt-ft5x06: fix multi-touch handling
  input: edt-ft5x06: sanity check on input
  input: edt-ft5x06: silence deferral error
  input: edt-ft5x06: use less magic and more defines
  input: edt-ft5x06: shorten defines
  input: edt-ft5x06: minor consistency cleanup/line length reduction
  input: edt-ft5x06: fix some whitespace/ident issues
  input: edt-ft5x06: only enable the irq when needed
  input: edt-ft5x06: cleanup headers
  input: edt-ft5x06: add support for the ft5426 controller
  input: edt-ft5x06: group r, w and rw functions
  input: of_touchscreen: add support for minimum sizes
  input: of_touchscreen: rename touchscreen-size-[xy]
  input: of_touchscreen: shorten variable names

* for-opinicus/leds:
  leds: pca963x: set DMBLNK as default during probe
  leds: pca963x: remove whitespace and checkpatch problems
  leds: pca963x: refactor initial led output a little
  leds: pca963x: save mode when setting power_state
  leds: pca963x: add defines and remove some magic values
  leds: pca963x: alphabetize headers
  leds: pca963x: abort probe if device is not connected

* for-opinicus/pwm:
  pwm: core: do not block apply->state on period

* for-opinicus/rtc:
  rtc: sun6i: add missing header

* for-opinicus/regulator:
  power: supply: axp288: use the BIT() macro
  power: supply: axp20x: add missing include bitops.h
  mfd: axp20x: use explicit bit defines
  mfd: axp20x: fixup includes
  regulator: dts: set proper lradc vref on OLinuXino Lime2
  regulator: dts: add full voltage range to LDO4 on the Lime2
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  regulator: axp20x: add software based soft_start for LDO3
  regulator: axp20x: add support for set_ramp_delay
  regulator: core: enable power when setting up constraints
  regulator: axp20x: name voltage ramping define properly
  regulator: axp20x: use defines for masks

* for-opinicus/serial:
  serial: 8250: expand debug ability of the irq handler
  serial: 8250: Only confirm handled interrupts on supported ones
  serial: 8250_dw: Make register access consistent
  serial: 8250_dw: Use serial port assessor wrapper
  serial: 8250: Do not treat the IIR register as a bitfield
  serial: 8250: Minor cleanups
  serial: 8250: Replace asm/irq with linux/irqreturn, linux/interrupt

* for-opinicus/fbdev: (21 commits)
  fbdev: ssd1307fb: Do not always clear the display on boot
  fbdev: ssd1307fb: Limit to support 0 - 180 rotation only
  fbdev: ssd1307fb: Add hardware accelerated rotation support
  fbdev: ssd1307fb: Ensure display is toggled properly
  fbdev: ssd1307fb: Ensure set_par can do bring-up
  fbdev: ssd1307fb: Remove unused forward declaration
  fbdev: ssd1307fb: Reduce magic values with defines
  fbdev: ssd1307fb: Use resolution instead of dimensions
  fbdev: ssd1307fb: cleanup: Group fb_info.fix
  fbdev: ssd1307fb: Use ratelimited error printing
  fbdev: ssd1307fb: Make output a little more consistent
  fbdev: ssd1307fb: Rename i2c device ids
  fbdev: ssd1307fb: Abort probe if we cannot talk to the display
  fbdev: sysfs: Add rotation in degrees support to validation
  fbdev: sysfs: Expand input validation to degree's
  fbdev: sysfs: Input validation
  fbdev: sysfs: Replace simple_strtoul with kstrtoul
  fbdev: sysfs: Sort headers
  fbdev: of: Add parameter to not clear screen on probe
  fbdev: of: Add of parsing helper
  ...

* for-opinicus/hdmi:
  arm/dts: Use hdmi_i2c node on the OLinuXino Lime2
  [WIP-do-not-merge] drm/sunxi: Split off hdmi-i2c as a separated driver
  drm: sun4i: check for i2c busy status
  drm/sun4i: make fifo_transfer more verbose in case of error
  drm/sun4i: i2c: consolidate ddc items
  drm/sun4i: make bool assignment explicit
  drm/sun4i: enable/disable the tmds clock on use
  drm/sun4i: Fix NULL pointer dereference at unbind
  drm/sun4i: improve header readability
  drm/sun4i: Fix Kconfig indenting
  drm/edid: Prevent NULL pointer deref when there is no I2C adapter